HP LaserJet 3055 User Manual

Using the all-in-one control panel
You can configure settings at the all-in-one control panel.
Changing the all-in-one control-panel display language
Use this procedure to print reports or to show messages on the all-in-one control-panel display in a
language other than the default for your country/region.
To change the all-in-one control-panel display language
1.Press  Menu.
2. Use the  < or the  > button to select  System setup, and then press 
.
3. Use the  < or the  > button to select  Language, and...

To change the default media type
1.Press  Menu.
2. Use the  < or the  > button to select  System setup, and then press 
.
3. Use the  < or the  > button to select  Paper setup, and then press 
.
4. Use the  < or the  > button to select  Def. paper type, and then press 
.
5. Use the  < or the  > button to select the type.
6. Press 
 to save your selection.
Changing the default tray configuration 
The default tray configurations (size and type) are set to  Any, which means that any type and any
size of...

Using the all-in-one volume controls
You can control the volume of the following sounds:
●The alarm sound that the all-in-one emits when 
it requires attention, such as when the all-in-one
door is open.
● The beeps that are emitted when you press the all-in-one control-panel buttons.
● The phone line sounds for outgoing faxes.
● The ring volume for incoming faxes.
Changing the alarm volume
The alarm sounds when the all-in-one presents an 
alert or critical error message. The alarm duration
length is one...

Changing the ring volume of the fax
The fax ring sounds when the all-in-one is initially sending or receiving a call. The ring duration
length depends on the local telecom ring-pattern length.
To change the ring volume of the fax 
1.Press  Menu.
2. Use the  < or the  > button to select  System setup, and then press 
.
3. Use the  < or the  > button to select  Volume settings , and then press 
.
4. Press the  < or the  > button once to select  Ring volume, and then press 
.
5. Use the  < or the  > button...

5 Printing
This section provides information about common printing tasks.
●
Using features in the Windows printer driver
●
Using features in the Macintosh printer driver
●
Selecting an output location (HP LaserJet 3390/3392 all-in-one)
●
Printing on special media
●
Canceling a print job
For information about managing the all-in-one and  its settings by using the HP ToolboxFX, see
HP ToolboxFX.
NOTEMany of the functions that are described in this chapter also can be performed by
using the HP ToolboxFX....

Using features in the Windows printer driver
When you print from a software program, many of the product features are available from the printer
driver. For complete information about the features that are available in the printer driver, see the
printer-driver Help. The following features are described in this section:
●
Creating and using quick sets
●
Creating and using watermarks
●
Resizing documents
●
Setting a custom paper size from the printer driver
●
Using different paper and printing covers
●...

Creating and using watermarks
A watermark is a notice, such as Confidential, that is printed in the background of each page of a
document.
To use an existing watermark
1. Open the printer driver (see 
Gaining access to the printer drivers ).
2. From the  Effects tab, click the  Watermarks drop-down list.
3. Click the watermark that you want to use.
4. If you want the watermark to appear only  on the first page of the document, click First Page Only .
5. Click  OK. The product is now set to print the...

Setting a custom paper size from the printer driver
To set a custom paper size
1.Open the printer driver (see 
Gaining access to the printer drivers ).
2. On the  Paper or Paper/Quality  tab, click Custom.
3. On the  Custom Paper Size  window, type the name of the custom paper size.
4. Type the paper-size length and width. If you type a  size that is too small or too large, the driver
automatically adjusts the size to the minimum  or maximum size that is allowed.
5. If necessary, click the button to...

Printing multiple pages on one sheet of paper
You can print more than one page on a single sheet of paper. This feature is available in some
drivers and provides a cost-effective way to print draft pages.
To print more than one page on a sheet of paper, look for a layout or pages-per-sheet option in the
driver. (This is sometimes called 2-up, 4-up, or n-up printing.)
To print multiple pages on one sheet of paper
1.Open the printer driver (see 
Gaining access to the printer drivers ).
2. Click the...

To print on both sides automatically (HP LaserJet 3390/3392 all-in-one)
1.Insert enough paper into one of the trays to  accommodate the print job. If you are loading
special paper such as letterhead, load it in one of the following ways:
● For tray 1, load the letterhead paper 
with the front side up, bottom-edge first.
● For all other trays, load the letterhead paper with
 front side down, and the top edge at the
back of the tray.
CAUTION Do not load paper that is heavier than 105 g/m2 (28 lb bond)....