HP LaserJet 3055 User Manual

To change the default 2-Sided setting
1.On the all-in-one control panel, press  Menu.
2. Use the  < or the  > button to select  Copy setup, and then press 
.
3. Use the  < or the  > button to select  Default 2-sided, and then press 
.
4. Use the  < or the  > button to select the option for how you normally want to use the automatic
duplexer when you copy documents.
5. Press 
 to save the selection
ENWW Using automatic two-sided printing (duplexing) to copy documents (HP LaserJet
3390/3392 all-in-one)133
 

Changing tray selection (HP LaserJet 3390/3392 all-in-one)
The all-in-one is set to automatically pull media from trays that contain media. The all-in-one always
pulls media from the priority input tray (tray 1) if you insert media into tray 1. If there is no media in
tray 1, the all-in-one attempts to pull media from tray 3, if installed, and then from tray 2.
You can specify which tray you want to use by changing the tray selection.  Auto select, Tray 1,
Tray 2 , and Tray 3  are available settings....

Copying photos and books (HP LaserJet
3052/3055/3390/3392 all-in-one only)
To copy a photo 
NOTEPhotos should be copied from the flatbed scanner of the HP LaserJet
3052/3055/3390/3392 all-in-one, not from the automatic document feeder (ADF).
1. Lift the lid and place the photo on the  flatbed scanner with the picture-side down and the upper-
left corner of the photo in  the lower-right corner of the glass.
HP LaserJet
HP LaserJet 3390/33923052/3055
2.
Gently close the lid.
3. Press  Start Copy.
To copy a...

2.Gently close the lid.
HP LaserJet
HP LaserJet 3390/3392 3052/3055
3.
Gently press down on the lid to press  the book to the flatbed scanner surface.
HP LaserJet
HP LaserJet 3390/33923052/3055
4.
Press  Start Copy .
136 Chapter 7   Copy ENWW
 

Viewing copy settings (HP LaserJet 3390/3392 all-in-one
only)
Use the Current Settings  button to see the copy  settings for the current copy job.
To view copy settings
1. Press  Current Settings  to see the current setting for 2-sided copying.
2. Continue to press  Current Settings to scroll through the copy settings for the current copy job.
Settings should appear in the following order: 2-sided copying, reduction/enlargement, copy
quality, number of copies, tray source, media size, media type,...

138 Chapter 7   CopyENWW
 

8 Scan
●Understanding scanning methods
●
Scanning from the all-in-one control panel (Windows)
●
Scanning by using HP LaserJet Scan (Windows)
●
Scanning from the all-in-one and HP Director (Macintosh)
●
Canceling a scan job
●
Scanning by using other software
●
Scanning a photo or a book
●
Scanning by using optical character recognition (OCR) software
●
Scanner resolution and color
●
To clean the scanner glass
ENWW 139
 

Understanding scanning methods
You can scan an item in the following ways.
●Scan from the all-in-one:
 Start scanning directly from the all-in-one by using the all-in-one
control-panel scan buttons. The  Scan To button can be programmed to scan to a folder
(Windows only) or to scan to e-mail.
For more information, see 
Scanning from the all-in-one control panel (Windows)  or Scanning
from the all-in-one and HP Director (Macintosh).
● Scan from the computer by using
 HP LaserJet Scan (Windows): In the...

Scanning from the all-in-one control panel (Windows)
NOTEScanning from the all-in-one control panel  is only supported with a full software
installation. HP ToolboxFX must be running to scan by  using the Scan To button or the Start
Scan button.
NOTE For installations in which the all-in-one is directly connected to the computer, some
scan destinations are set up by default . For installations in which the all-in-one is connected
through a network, scanning from the all-in-one control panel is turned off...

To create, modify, or delete destinations
1.In the Hewlett-Packard program group, select  Scan to start HP LaserJet Scan.
NOTE Pressing Start Scan on the all-in-one control panel also starts HP LaserJet Scan
when the all-in-one is directly connected to the computer.
2. Click  Setup  and then follow the onscreen instructions.
● Create a new destination
. Set up a new destination using a settings wizard.
● Modify an existing destination
. Select an existing destination and then use a settings
wizard to...