HP LaserJet 1018 User Manual

							
B
Regulatory information
FCC compliance
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency  energy. If it is not installed and
used in accordance with the instructions, it may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the  equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase separation between equipment and receiver.
● Connect equipment to an outlet on a circuit  different from that to which the receiver is
located.
● Consult your dealer or an experienced radio/TV technician.
NOTE
Any changes or modifications to the printer  that are not expressly approved by Hewlett-
Packard could void the users  authority to operate this equipment.
Use of a shielded interface cable is required to  comply with the Class B limits of Part 15 of
FCC rules.
ENWW FCC compliance83
 
						

							
Declaration of Conformity statement
Declaration of Conformity
according to ISO/IEC Guide 22 and EN 45014
Manufacturers Name:Hewlett-Packard Company
Manufacturers Address: 11311 Chinden Boulevard,
Boise, Idaho 83714-1021, USA
declares that the product
Product Name: HP LaserJet 1018
Regulatory Model 
3): BOISB-0207-00
Product Options: ALL
conforms to the following Product Specifications:
Safety: IEC 60950-1:2001 / EN 60950-1:2001 +A11 IEC 60825-1:1993 +A1 +A2 / EN 60825-1:1994 +A1 +A2 (Class 1 Laser/LED Product)
GB4943-2001
EMC: CISPR 22:1997 / EN 55022:1998 Class B
1)
EN 61000-3-2:2000
EN 61000-3-3:1995 + A1
EN 55024:1998 +A1 +A2
FCC Title 47 CFR, Part 15 Class B
2) / ICES-003, Issue 4
GB9254-1998, GB17625.1-2003
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC, an d carries
the CE-marking accordingly.
1) The product was tested in a typical configuration with  Hewlett-Packard Personal Computer Systems. Compliance testing of prod uct to
standard with exception of clause 9.5, which is not yet in effect.
2) This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device ma y not cause
harmful interference, and (2) this device must accept any  interference received, including interference that may cause undesire d operation.
3) For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the pro duct name
or the product number(s).
Boise, Idaho 83714, USA01 January 2006
For Regulatory Topics ONLY:
Australia Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd.,  31-41 Joseph Street, Blackburn, Victoria 3130,
Australia.
European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ-TRE / Standards Europe, Herrenberger Straße 140, D-71034 Böblingen, Germany,  (FAX: +49-7031-14-3143)
USA Contact: Product Regulations Manager, Hewlett-Packard Company, PO Box 15, Mail Stop 160, Boise, Idaho 83707-0015, USA (Phone: 208-396-6000)
84Appendix B Regulatory information ENWW
 
						

							
Regulatory statements
Laser safety statement
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration has implemented regulations for laser products manufactured since August 1,
1976. Compliance is mandatory for products marketed in the United States. The printer is
certified as a Class 1 laser product under the U.S. Department of Health and Human
Services (DHHS) Radiation Performance Standard according to the Radiation Control for
Health and Safety Act of 1968.
Since radiation emitted inside the printer is completely confined within protective housings
and external covers, the laser beam cannot escape during any phase of normal user
operation.
WARNING!
Using controls, making adjustments, or performing procedures other than those specified in
this user guide could result  in exposure to hazardous radiation.
Canadian DOC regulations
Complies with Canadian EMC Class B requirements.
« Conforme à la classe B des normes canadiennes de compatibilité électromagnétiques
(CEM). »
Korean EMI statement
ENWW Regulatory statements85
 
						

							Laser statement for Finland
LASERTURVALLISUUS
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
HP LaserJet 1018 -laserkirjoitin on käyttäjän kannalta turvallinen luokan 1 laserlaite.
Normaalissa käytössä kirjoittimen suojakotelointi estää lasersäteen pääsyn laitteen
ulkopuolelle.
Laitteen turvallisuusluokka on määritetty standardin EN 60825-1 (1994) mukaisesti.
VAROITUS!
Laitteen käyttäminen muulla kuin käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.
VARNING!
Om apparaten används på annat sätt än i bruksanvisning specificerats, kan användaren
utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1.
HUOLTO
HP LaserJet 1018 -kirjoittimen sisällä ei ole käyttäjän huollettavissa olevia kohteita. Laitteen
saa avata ja huoltaa ainoastaan sen huoltamiseen koulutettu henkilö. Tällaiseksi
huoltotoimenpiteeksi ei katsota väriainekasetin vaihtamista, paperiradan puhdistusta tai
muita käyttäjän käsikirjassa lueteltuja, käyttäjän tehtäväksi tarkoitettuja ylläpitotoimia, jotka
voidaan suorittaa ilman erikoistyökaluja.
VARO!
Mikäli kirjoittimen suojakotelo avataan, olet alttiina näkymättömälle lasersäteilylle laitteen
ollessa toiminnassa. Älä katso säteeseen.
VARNING!
Om laserprinterns skyddshölje öppnas då apparaten är i funktion, utsättas användaren för
osynlig laserstrålning. Betrakta ej strålen.
Tiedot laitteessa käytettävän laserdiodin säteilyominaisuuksista:
Aallonpituus 785-800 nm
Teho 5 mW
Luokan 3B laser
86Appendix B Regulatory information ENWW
 
						

							
Environmental product stewardship program
Protecting the environment
Hewlett-Packard Company is committed to providing quality products in an environmentally
sound manner. This product has been designed with several attributes to minimize impacts
on our environment.
Ozone production
This product generates no appreciable ozone gas (O3).
Energy consumption
Power usage drops significantly while in PowerSave/Sleep mode, which saves natural
resources and saves money without affecting the high performance of this product. This
product qualifies for Energy Star® (version 3.0), which is a voluntary program to encourage
the development of energy-efficient office products.
Energy Star is a U.S. registered service mark of  the U.S. EPA. As an Energy Star partner,
Hewlett-Packard Company has determined that this product meets Energy Star guidelines
for energy efficiency. For more information, see  http://www.energystar.gov/.
Toner consumption
EconoMode uses significantly less toner, which might  extend the life of the print cartridge.
Paper use
This products manual duplex feature (two-sided printing, see Printing on both sides of the
paper (manual two-sided printing)) and N-up printing (multiple pages printed on one page)
capability can reduce paper usage and the resulting demands on natural resources.
Plastics
Plastic parts over 25 grams (0.9 oz) are marked according to international standards that
enhance the ability to identify plastics for recycling purposes at the end of the products life.
ENWW Environmental product stewardship program 87
 
						

							
HP LaserJet printing supplies
In many countries/regions, this products printing supplies (for example, print cartridge) can
be returned to HP through the HP Printing Supplies Returns and Recycling Program. An
easy-to-use and free take back program is available in more than 30 countries/regions. Multi-
lingual program information and instructions are included in every new HP LaserJet print
cartridge and supplies package.
HP printing supplies returns and recycling program
information
Since 1992, HP has offered HP LaserJet supplies return and recycling free of charge in 86%
of the world market where HP LaserJet supplies are sold. Postage-paid and pre-addressed
labels are included within the instruction guide  in most HP LaserJet print cartridge boxes.
Labels and bulk boxes are also available through the website:  http://www.hp.com/recycle.
More than 10 million HP LaserJet print cartridges were recycled globally in 2002 through the
HP Planet Partners supplies recycling program. This record number represents 26 million
pounds of print cartridge materials diverted from landfills. Worldwide, HP recycled an
average of 80% of the print cartridge by  weight consisting primarily of plastic and metals.
Plastics and metals are used to make new products such as HP products, plastic trays and
spools. The remaining materials are disposed of in an environmentally responsible manner.
U.S. recycling returns
For a more environmentally responsible return of used cartridges and supplies, HP
encourages the use of bulk returns. Simply bundle two or more cartridges together and use
the single, pre-paid, pre-addressed UPS label that is supplied in the package. For more
information in the U.S., call 800-340-2445 or visit the HP website at  http://www.hp.com/recycle.
Non-U.S. recycling returns
Non-US customers should visit the  http://www.hp.com/recycle website for further information
regarding availability of the HP Supplies Returns and Recycling program.
Paper
This product is capable of using recycled papers when the paper meets the guidelines
outlined in the  Print Media Guide . See 
Ordering supplies for ordering information. This
product is suitable for the use of recycled paper according to EN12281:2002.
Material restrictions
This HP product does not contain batteries.
88 Appendix B Regulatory information ENWW
 
						

							
Disposal of Waste Equipment by Users in Private Household
in the European Union
This symbol on the product or on its packaging indicates that this product must not be
disposed of with your other household waste. Instead,  it is your responsibility to dispose of
your waste equipment by handing it over to a designated collection point for the recycling of
waste electrical and electronic equipment. The separate collection and recycling of your
waste equipment at the time of disposal will help to conserve natural resources and ensure
that it is recycled in a manner that protects human health and the environment. For more
information about where you can drop off  your waste equipment for recycling, please contact
your local city office, your household waste disposal service or the shop where you
purchased the product.
For more information
To obtain information about these environmental topics:
● Product environmental profile sheet for this and many related HP products
● HPs commitment to the environment
● HPs environmental management system
● HPs end-of-life product return and recycling program
● Material safety data sheets
Visit:  http://www.hp.com/go/environment  or http://www.hp.com/hpinfo/community/
environment/productinfo/safety .
ENWW Environmental product stewardship program 89
 
						

							
Material safety data sheet
Material Safety Data Sheets (MSDS) for supplies containing chemical substances (for
example, toner) can be obtained by contacting the HP website at: http://www.hp.com/go/
msds  or http://www.hp.com/hpinfo/community/environment/productinfo/safety .
90 Appendix B Regulatory information ENWW
 
						

							
C
Warranty and licensing
Hewlett-Packard limited warranty statement
HP PRODUCT
HP LaserJet 1018 printerDURATION OF LIMITED WARRANTY
12 month limited warranty
HP warrants to you, the end-user customer, that  HP hardware and accessories will be free
from defects in materials and workmanship after  the date of purchase, for the period
specified above. If HP receives notice of such defects during the warranty period, HP will, at
its option, either repair or replace products which prove to be defective. Replacement
products may be either new or equivalent in performance to new.
HP warrants to you that HP software will not fail to execute its programming instructions after
the date of purchase, for the period specified  above, due to defects in material and
workmanship when properly installed and used. If HP receives notice of s\
uch defects during
the warranty period, HP will replace software which does not execute its programming
instructions due to such defects.
HP does not warrant that the operation of HP  products will be uninterrupted or error free. If
HP is unable, within a reasonable time, to repair or replace any product to a condition as
warranted, you will be entitled to a refund of the purchase price upon prompt return of the
product.
HP products may contain remanufactured parts equivalent to new in performance or may
have been subject to incidental use.
Warranty does not apply to defects  resulting from (a) improper or inadequate maintenance
or calibration, (b) software, interfacing, parts  or supplies not supplied by HP,
(c) unauthorized modification or misuse, (d) operation outside of the published
environmental specifications for the product, or (e) improper site preparation or maintenance.
TO THE EXTENT ALLOWED BY LOCAL LAW, THE ABOVE WARRANTIES ARE
EXCLUSIVE AND NO OTHER WARRANTY OR CONDITION, WHETHER WRITTEN OR
ORAL, IS EXPRESSED OR IMPLIED AND HP SPECIFICALLY DISCLAIMS ANY IMPLIED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY,
AND FITNESS FOR A PARTICULAR PURPOSE. Some countries/regions, states or
provinces do not allow limitations on the duration  of an implied warranty, so the above
limitation or exclusion might not apply to you. This warranty gives you specific legal rights
and you might also have other rights that vary from country/region to country/region, state to
state, or province to province. HPs limited warranty is valid in any country/region or locality
where HP has a support presence for this product and where HP has marketed this product.
The level of warranty service you receive may vary according to local standards. HP will not
alter form, fit or function of the product to  make it operate in a country/region for which it was
never intended to function for legal or regulatory reasons.
ENWW Hewlett-Packard limited warranty statement 91
 
						

							TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY
STATEMENT ARE YOUR SOLE AND EXCLUSIVE REMEDIES. EXCEPT AS INDICATED
ABOVE, IN NO EVENT WILL HP OR ITS SUPPLIERS BE LIABLE FOR LOSS OF DATA
OR FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUDING LOST
PROFIT OR DATA), OR OTHER DAMAGE, WHETHER BASED IN CONTRACT, TORT, OR
OTHERWISE. Some countries/regions, states or provinces do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or exclusion may
not apply to you.
THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT
LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN
ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF
THIS PRODUCT TO YOU.
92Appendix C Warranty and licensing ENWW