HP IPAQ 1910 Pocket PC Reference Guide

							Getting Acquainted
Reference Guide 1–15
Change the Backlight Settings
You can change the backlight settings to match your environment 
or to conserve battery power.
✎The backlight settings on your iPAQ Pocket PC are synchronized 
with the settings on your personal computer when they connect 
using ActiveSync.
To change the backlight settings:
1. From the Start menu, tap Settings.
2. Tap System, then Backlight.
3. Select the backlight settings.
311757-001.book Page 15 Friday, October 11, 2002 12:02 PM 
						

							1–16 Reference Guide
Getting Acquainted
Manage Your iPAQ Pocket PC
You can effectively manage your iPAQ Pocket PC by learning 
how to:

Back up and restore information

Perform full and normal resets

Align the screen
Back Up Information
You can back up information to the personal computer using 
ActiveSync.
Back Up/Restore Using ActiveSync
You should back up information to your computer regularly to 
help reduce the chance of losing information.
Close all applications on your iPAQ Pocket PC before restoring 
your information.
ÅWARNING: Restoring your information replaces the current 
information on your iPAQ Pocket PC with the information saved in 
your backup.
Changing the Backlight Settings
On ... Select when to use the...
Battery PowerBacklight on battery power.
External PowerBacklight on external power.
BrightnessAppropriate level of brightness.
Slide the bar to the lowest level to conserve the most 
power.
311757-001.book Page 16 Friday, October 11, 2002 12:02 PM 
						

							Getting Acquainted
Reference Guide 1–17
To back up/restore using ActiveSync:
1. Make sure your iPAQ Pocket PC is connected to your 
computer.
2. From your computer, open Microsoft ActiveSync. From 
theStart menu, click Programs, then click Microsoft 
ActiveSync.
3. From the Tools menu, click Backup/Restore.
4. Click the Backup or Restore tab, then select your options.
5. Click Backup Now or Restore Now.
311757-001.book Page 17 Friday, October 11, 2002 12:02 PM 
						

							1–18 Reference Guide
Getting Acquainted
Perform a Normal Reset
A normal reset is sometimes referred to as a “soft reset.” 
ÄCAUTION: Perform a normal reset when you want to stop all 
running applications. A normal reset will not erase any programs or 
saved data.
To perform a normal reset:
1. Locate the Reset button on the side panel of the iPAQ 
Pocket PC.
2. Lightly press the Reset button with a stylus for two seconds.
✎The iPAQ Pocket PC will restart in approximately five seconds 
and display the To d a y screen.
311757-001.book Page 18 Friday, October 11, 2002 12:02 PM 
						

							Getting Acquainted
Reference Guide 1–19
Perform a Full Reset
A full reset is sometimes referred to as a “hard reset.” You should 
perform a full reset when you want to clear all settings, programs, 
and data from memory.
To perform a full reset:
ÄCAUTION: If you perform a full reset, you will return to your default 
settings and lose all information.
1. Press and hold the Power button 1.
2. Press the Reset button 2 on the side panel of the iPAQ 
Pocket PC with the stylus.
3. Hold all buttons until the displayed image begins to fade 
(approximately four seconds).
311757-001.book Page 19 Friday, October 11, 2002 12:02 PM 
						

							1–20 Reference Guide
Getting Acquainted
4. Release the Power button and remove the stylus.
✎You can verify a full reset by pressing the Power button. If the 
iPAQ Pocket PC has been fully reset, it will not turn on.
5. Set up your iPAQ Pocket PC.
Align the Screen
When you turn on the screen of your iPAQ Pocket PC for the first 
time, you are guided through the alignment process. Realign your 
screen if:

The iPAQ Pocket PC does not respond accurately to your taps

You performed a restore following a data backup

You performed a hard reset of your iPAQ Pocket PC
To align the screen:
1. From the Start menu, tap Settings.
2. Tap System, then the Screen icon.
3. Tap the Align Screen button.
4. Tap the cross object at each location. Be precise when you 
tap the cross object.
5. Tap OK.
311757-001.book Page 20 Friday, October 11, 2002 12:02 PM 
						

							Getting Acquainted
Reference Guide 1–21
Manage the Battery
To use your battery power effectively, you need to know how to:

Install the battery

Monitor the battery

Charge the battery
✎You should recycle and dispose of the lithium ion battery 
properly.
ÄCAUTION: The iPAQ Pocket PC has a small backup battery, which 
allows you to change the main battery without losing data. However, 
it is strongly recommended that you replace the main battery 
immediately with a fully charged battery.
✎The backup battery provides power to preserve stored data in 
memory. The Pocket PC, however, will not operate on backup 
battery.
311757-001.book Page 21 Friday, October 11, 2002 12:02 PM 
						

							1–22 Reference Guide
Getting Acquainted
Install the Battery
1. Locate the removable/rechargeable battery.
2. Remove the battery cover by sliding the Battery Cover 
Release button up 1 and pulling the battery cover away from 
the unit 2.
311757-001.book Page 22 Friday, October 11, 2002 12:02 PM 
						

							Getting Acquainted
Reference Guide 1–23
3. Slide in the battery (with the label side up) so that the 
connectors on the right side are fully seated on the pins 1. 
Then push the left side of the battery in place 2.
311757-001.book Page 23 Friday, October 11, 2002 12:02 PM 
						

							1–24 Reference Guide
Getting Acquainted
4. Re-install the battery cover by matching the tabs on the 
battery cover to the latches on the iPAQ Pocket PC, then snap 
into place.
✎The iPAQ Pocket PC will not operate if the battery cover is not 
installed.
✎You will need to fully charge your iPAQ Pocket PC within the 
next 12 hours. The amber charge light is flashing (blinking) when 
your iPAQ Pocket PC is recharging the battery. The charge light 
turns solid amber when the battery is fully charged.
311757-001.book Page 24 Friday, October 11, 2002 12:02 PM