Home > HP > Projector > HP Ep9010 Home Cinema Digital Projector Users Guide

HP Ep9010 Home Cinema Digital Projector Users Guide

Here you can view all the pages of manual HP Ep9010 Home Cinema Digital Projector Users Guide. The HP manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 41

Playing DVDs and CDs
User’s Guide 41
2. Press the DVD eject   button on the projector or remote control to open the 
tray.
3. Place the CD on the tray.
4. Press the DVD eject   button again to close the tray.
The projector selects the internal DVD player as the active source and begins 
playing the first track. If the lamp is on, the projector shows the list of songs 
on the CD.
5. Press the buttons shown in the following table to control the songs. If the 
lamp is off, some controls are not applicable....

Page 42

42 User’s Guide
Playing DVDs and CDs 

Page 43

User’s Guide 43
3
Showing video
This chapter describes how to show video from external sources connected to the 
projector. See the previous chapter for information about using the internal DVD 
player.
Showing the video source
1. Be sure the video device is connected to the projector and turned on. See 
“Connecting a video source” on page 19.
2. Be sure the projector is set up, turned on, and adjusted. See “Making basic 
adjustments” on page 31.
3. Press the source button on the projector or remote...

Page 44

44 User’s Guide
Showing video
3. Press the source button on the projector or remote control one or more times 
to select the DVI port.
4. If the computer display is not shown on the projector, you might have to turn 
on the computer’s video output port. For example, some computers require 
you to press a key combination, such as Fn+F4 or Fn+F5. See the user 
documentation provided with your computer.
If you want to adjust the picture, see “Changing the picture mode” on page 33. 

Page 45

User’s Guide 45
4
Adjusting the projector
Adjusting the picture and sound
Adjusting the picture
The on-screen menu provides many settings that allow you to fine-tune the 
picture.
1. Press menu, and go to Picture.
2. Change the picture adjustments as needed.
From the Picture menu, you can change many picture options, such as 
brightness, contrast, and picture shape, as well as customize the picture 
modes.
To get descriptions for all available picture adjustments, see “Picture menu” on 
page 47. 
✎
To...

Page 46

46 User’s Guide
Adjusting the projector
Adjusting the projector setup
1. Press menu, and go to Setup.
2. Set the setup adjustments as needed.
From the Setup menu, you can select settings, such as menu language, 
projector position, and menu timeout.
To get descriptions for all available setup adjustments, see “Setup menu” on 
page 49.
Using the on-screen menu
Changing settings using the on-screen menu
You can change the on-screen menu settings with the buttons on either the 
projector or the remote...

Page 47

Adjusting the projector
User’s Guide 47
Input menu
For a visual aid, see “Back panel” on page 12.
Picture menu
Some picture adjustments are available only when certain input ports are in use. 
Unavailable adjustments are shown in gray in the on-screen menu.
Input menu
Internal DVD Shows the video from the internal DVD player.
Component Shows the source connected to the component-video 
port (YPbPr).
S-Video Shows the source connected to the S-video port.
Composite Shows the source connected to the...

Page 48

48 User’s Guide
Adjusting the projector
Widescreen input Sets whether a widescreen (16:9) input device is in use. 
Adjusts the height of the picture accordingly.
VGA settings... Adjusts settings for a computer input.
Auto-sync Resynchronizes the projector to the input signal. This 
can compensate for any change in the signal.
Frequency Adjusts the timing of the projector relative to the 
computer.
Tracking Adjusts the phase of the projector relative to the 
computer.
Vertical offset Adjusts the picture...

Page 49

Adjusting the projector
User’s Guide 49
Sound menu
Setup menu
Help menu
Sound menu
Mute Turns off sound output.
Volume Adjusts the loudness of the speakers.
Subwoofer Adjusts the loudness of only the subwoofer.
Internal speakers Sets whether the internal speakers are turned on.
Reset sound settings Restores sound settings to their default settings.
Setup menu
Language Selects the language used by the on-screen menu.
Timeout for menu Sets how many seconds the on-screen menu waits for 
input before it...

Page 50

50 User’s Guide
Adjusting the projector 
Start reading HP Ep9010 Home Cinema Digital Projector Users Guide

Related Manuals for HP Ep9010 Home Cinema Digital Projector Users Guide

All HP manuals