HP Envy 2 Owners Manual

Multimedia board
DescriptionSpare part number
Multimedia board702361-001
Before removing the multimedia board (which includes USB, Audio, and HDMI connectors), follow
these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then...

Hinge assembly removal
DescriptionSpare part number
Hinge assembly702354-001
Before removing the hinge, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.Remove...

Top cover with keyboard (includes) TouchPad module
DescriptionSpare part number
TouchPad board (includes cable) 702368-001
Top cover with keyboard for use in the United States 702369-001
Top cover with keyboard for use in the United Kingdom and Singapore 702369-031
Top cover with keyboard for use in Germany 702369-041
Top cover with keyboard for use in France 702369-051
Top cover with keyboard for use in Italy 702369-061
Top cover with keyboard for use in Spain 702369-061
Top cover with keyboard for use...

Remove the TouchPad button board and cable:
1.Turn the top cover upside down, with the back edge toward you.
2.Disconnect the TouchPad cable (1) and release the metal tape (2).
3.Remove the two Phillips PM screws, and then remove the TouchPad tab.
4.Remove the TouchPad.
Reverse this procedure to install the TouchPad button board and cable.
36 Chapter 4   Removal and replacement procedures 

System board
NOTE:The system board spare part kit includes replacement thermal material.
DescriptionSpare part number
For use only with computer models equipped with 64–GB devices 702366–001
For use only with W8 Standard computer models equipped with 64–GB devices 702366-501
For use only with W8 Pro computer models equipped with 64–GB devices 702366–601
System board for keyboard dock 702367–001
System board for use only with 64–GB models equipped with an Intel Z2760 1.8GHz processor
(includes processor...

2.Remove the 5 Phillips PM 2.0x3.0 screws (1).
3.Remove the system board (2).
Reverse this procedure to install the system board.
Tablet parts
The following sections show the removal and replacement procedures for the tablet parts.
38 Chapter 4   Removal and replacement procedures 

NOTE:Any time the internal tablet components are repaired, the display bezel should be replaced.
Component replacement procedures 39 

Display panel assembly and Battery
NOTE:When disassembling or assembling the display panel, it is necessary to operate in a clean
environment such as a clean room or clean work table.
DescriptionSpare part number
2–cell 25WHr 3.38 AH Li-ion battery 694501–001
11.6-in, HD, Anti-Glare WLED display panel for use in all regions 702362-001
11.6-in, HD, Anti-Glare WLED display panel for use with 64–GB units in Europe, the Middle
East and Africa702355-001
11.6-in, HD, Anti-Glare WLED display panel for use with...

Before removing the display panel, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Remove the display panel:
1.Turn the computer right-side up, with the rear...

5.Release the touch screen.
NOTE:Be careful not to scratch the screen.
6.Remove the 5 2x3–mm screws securing the panel to the display assembly (2 on the top edge, 1
on the right side, and 2 on the left side).
42 Chapter 4   Removal and replacement procedures