HP Envy 100 User Manual

To clean the paper feed
1.From the Home screen, touch Settings to display the Setup Menu. In the Setup Menu,
touch Tools.
2.In the Tools Menu, touch Paper Feed Cleaning.
3.Remove all the paper from the paper tray. Touch OK.
Related topics
Order ink supplies
Tips for working with ink
Cartridge warranty information
The HP cartridge warranty is applicable when the product is used in its designated HP
printing device. This warranty does not cover HP ink products that have been refilled,
remanufactured,...

Chapter 6
30 Work with cartridges
 

7 Connectivity
•Add the HP ENVY to a network
•
Tips for setting up and using a networked printer
Add the HP ENVY to a network
•WiFi Protected Setup (WPS)
•
Wireless with a router (infrastructure network)
•
Wireless without a router (ad hoc connection)
•
Install the software for a network connection
WiFi Protected Setup (WPS)
To connect the HP ENVY to a wireless network using WiFi Protected Setup (WPS), you
will need the following:
❑A wireless 802.11 network that includes a WPS-enabled wireless router or...

Use PIN method
a. Select setup method.
❑Touch Setup.
❑Touch Network.
❑Touch WiFi Protected Setup.
❑Touch PIN.
b. Set up wireless connection.
❑Touch Start.
The device displays a PIN.
❑Enter PIN on WPS-enabled router or other networking device.
NOTE:The product begins a timer for approximately two minutes in
which the PIN needs to be entered on the networking device.
❑Touch OK.
c. Install software.
Wireless with a router (infrastructure network)
To connect the HP ENVY to an integrated wireless WLAN 802.11...

Wireless without a router (ad hoc connection)
Use this section if you want to connect the HP ENVY to a wireless-capable computer
without using a wireless router or access point.
There are two methods you may use to connect the HP ENVY to your computer using
an ad hoc wireless network connection. Once connected, you can install the HP ENVY
software.
▲Turn on the wireless radio for the HP ENVY and the wireless radio on your computer.
On your computer, connect to the network name (SSID) hpsetup, which is...

1.In the Control Panel, double-click Network Connections.
2.On the Network Connections window, right-click the Wireless Network
Connection. If you see Enable on the pop-up menu, select it. Otherwise, if you see
Disable on the menu, the wireless connection is already enabled.
3.Right-click the Wireless Network Connection icon, and then click Properties.
4.Click the Wireless Networks tab.
5.Select the Use Windows to configure my wireless network settings check box.
6.Click Add, and then do the following:...

2.Touch Network.
NOTE:If the menu option you want is not visible on the screen, touch the up or
down arrow to scroll through all the menu options.
3.Touch Wireless Setup Wizard.
This runs the Wireless Setup Wizard. The setup wizard searches for available
networks, and then displays a list of detected network names (SSIDs). The
infrastructure networks appear first in the list, followed by available ad hoc networks.
The networks with the strongest signal appear first, the weakest appear last.
4.On the...

7.Touch OK again to confirm.
The product will attempt to connect to the SSID. If a message says you entered an
invalid WEP key, check the key you wrote down for your new network, follow the
prompts to correct the WEP key, and then try again.
8.When the product connects successfully to the network, go to your computer to install
the software.
NOTE:You can print the Wireless Network Test report at the end of a successful
Wireless Setup Wizard connection which can help identify any potential future
issues...

Tips for setting up and using a networked printer
Use the following tips to set up and use a networked printer:
•When setting up the wireless networked printer, make sure your wireless router or
access point is powered on. The printer searches for wireless routers, then lists the
detected network names on the display.
•To verify the wireless connection, check the wireless icon at the top of the Home
screen. If the icon is colored, the wireless connection is on. Touch the icon to display
the Wireless...

Chapter 7
38 Connectivity