HP Deskjet F2492 User Manual

							
Close lid.
b. Start scan.
 Start the  Scan job using the HP Photosmart Software.
c . Preview and accept.
 Preview the scanned image and accept.
Related topics
“
Stop the current job” on page 55
Chapter 5
28 Scan
Scan
 
						

							
6Copy
“Copy documents or photos” on page 29
Copy documents or photos
NOTE:To make copies, the HP All-in-One and computer must be connected and
turned on. The HP Photosmart Software must also be installed and running on your
computer prior to copying.
NOTE: Enlarge and reduce copy functionality is not available on all models.
▲Do one of the following:
1-sided original to 1-sided copy
a. Load paper.
 Load either small photo paper or full-size paper in the main input tray.
b. Load original.
 Lift lid on product.
 Load original print side down on right front corner of glass.
Copy documents or photos 29
Copy
 
						

							
Close lid.
c . Start copy.
 Press either  Start Copy Black  or Start Copy Color .
Related topics
“
Stop the current job” on page 55
Chapter 6
30 Copy
Copy
 
						

							
7 Work with cartridges
•Check the estimated ink levels
•
Order ink supplies
•
Automatically clean print cartridges
•
Manually clean print cartridges
•
Replace the cartridges
•
Use ink-backup mode
•
Cartridge warranty information
Check the estimated ink levels
You can easily check the ink supply level to determine how soon you might need to
replace a cartridge. The ink supply level shows an estimate of the amount of ink remaining
in the cartridges.
NOTE: If you have installed a refilled or remanufactured cartridge, or a cartridge that
has been used in another printer, the ink level indicator might be inaccurate or
unavailable.
NOTE: Ink level warnings and indicators provide estimates for planning purposes
only. When you receive a low-ink warnin g message, consider having a replacement
cartridge available to avoid possible printing delays. You do not have to replace the
cartridges until the print quality is unacceptable.
NOTE: Ink from the cartridges is used in the printing process in a number of different
ways, including in the initialization process, which prepares the product and cartridges
for printing, and in printhead servicing, which keeps print nozzles clear and ink flowing
smoothly. In addition, some residual ink is left in the cartridge after it is used. For more
information, see 
www.hp.com/go/inkusage .
To check the ink levels from the HP Photosmart Software
▲In the HP Solution Center, click the  Estimated Ink Levels icon.
NOTE:You can also open the  Printer Toolbox from the Print Properties  dialog
box. In the  Print Properties  dialog box, click the  Features tab, and then click the
Printer Services  button.
Related topics
“
Order ink supplies” on page 31
Order ink supplies
For a list of cartridge numbers, use the software that came with the HP All-in-One to find
out the reorder number.
Order ink supplies 31
Work with cartridges
 
						

							
Find the cartridge number
1.In the HP Solution Center, click  Settings, point to  Print Settings , and then click
Printer Toolbox .
NOTE:You can also open the  Printer Toolbox from the Print Properties  dialog
box. In the  Print Properties  dialog box, click the  Features tab, and then click the
Printer Services  button.
The Printer Toolbox  appears.
2. Click the  Estimated Ink Level  tab.
The estimated ink levels for the print cartridges appear. Use the menu at the bottom
to select  Cartridge details .
To order genuine HP supplies for the HP All-in-One, go to 
www.hp.com/buy/supplies . If
prompted, choose your country/region, follow  the prompts to select your product, and
then click one of the shopping links on the page.
NOTE: Ordering cartridges online is not supported in all countries/regions. If it is not
available in your country/region, you may still view supplies information and print a
list for reference when shopping at a local HP reseller.
To order ink cartridges from your desktop
▲ To learn which HP supplies work with your printer, order supplies online, or create a
printable shopping list, open HP Solution Center and select the online shopping
feature.
Cartridge information and links to online shopping also appear on ink alert messages.
In addition, you can find cartridge information and order online by visiting
www.hp.com/buy/supplies .
NOTE:Ordering cartridges online is not supported in all countries/regions. If it
is not available in your country/region, you may still view supplies information and
print a list for reference when shopping at a local HP reseller.
Related topics
“
Choose the right cartridges” on page 32
Choose the right cartridges
HP recommends that you use original HP ca rtridges. Original HP cartridges are designed
and tested with HP printers to help you easily produce great results, time after time.
Related topics
“
Order ink supplies” on page 31
Automatically clean print cartridges
If your printed pages are faded or if they contain ink streaks, the print cartridges might be
low on ink or might need to be cleaned. For more information, see  “
Check the estimated
ink levels” on page 31.
If the print cartridges are not low on ink, clean the print cartridges automatically.
Chapter 7
32 Work with cartridges
Work with cartridges
 
						

							
CAUTION:Clean print cartridges only when necessary. Unnecessary cleaning
wastes ink and shortens the life of the cartridge.
To clean the print cartridges
1. In the HP Solution Center, click  Settings. In the Print Settings  area, click Printer
Toolbox .
2. Click  Clean the Print Cartridges .
3. Click  Clean , and then follow the onscreen instructions.
Manually clean print cartridges
Make sure you have the following materials available:
•Dry foam rubber swabs, lint-free cloth, or any soft material that will not come apart or
leave fibers.
TIP: Coffee filters are lint-free and work well for cleaning print cartridges.
•Distilled, filtered, or bottled water (tap water might contain contaminants that can
damage the print cartridges).
CAUTION: Do not use platen cleaners or alcohol to clean the print cartridge
contacts. These can damage the print cartridge or the product.
To clean the print cartridge contacts
1. Turn on the product and open the print cartridge door.
The print carriage moves to the center of the product.
2. Wait until the print carriage is idle and silent, and then unplug the power cord from
the back of the product.
3. Lightly press down on the print cartridge to release it, and then pull it towards you out
of the slot.
NOTE: Do not remove both print cartridges at the same time. Remove and clean
each print cartridge one at a time. Do not leave a print cartridge outside the HP
All-in-One for more than 30 minutes.
4. Inspect the print cartridge contacts for ink and debris buildup.
5. Dip a clean foam rubber swab or lint-free cloth into distilled water, and squeeze any
excess water from it.
6. Hold the print cartridge by its sides.
7. Clean only the copper-colored contacts. Allow the print cartridges to dry for
approximately ten minutes.
Manually clean print cartridges 33
Work with cartridges
 
						

							
1Copper-colored contacts
2Ink nozzles (do not clean)
8.Hold the print cartridge with the HP logo on top, and insert the print cartridge back
into the slot. Make sure you push the print cartridge in firmly until it snaps into place.
9.Repeat if necessary for the other print cartridge.
10. Gently close the print cartridge door and plug the power cord into the back of the
product.
Replace the cartridges
To replace the cartridges
1.Check power.
2. Remove cartridge.
a. Open cartridge door.
Chapter 7
34 Work with cartridges
Work with cartridges
 
						

							
Wait for print carriage to move to center of the product.
b . Press down to release cartridge, then remove it from slot.
3. Insert new cartridge.
a. Remove cartridge from packaging.
b . Remove plastic tape using pink pull tab.
c. Line up colored shaped icons, th en slide cartridge into slot until it clicks into place.
Replace the cartridges 35
Work with cartridges
 
						

							
d. Close cartridge door.
4. Align cartridges.
Related topics
•“
Choose the right cartridges” on page 32
•“
Order ink supplies” on page 31
Use ink-backup mode
Use the ink-backup mode to operate the HP All-in-One with only one print cartridge. The
ink-backup mode is initiated when a print cartridge is removed from the print cartridge
carriage. During ink-backup mode, the product can only print jobs from the computer.
NOTE: When the HP All-in-One operates in ink-backup mode, a message is
displayed on screen. If the message is displayed and two print cartridges are installed
in the product, verify that the protective piece of plastic tape has been removed from
each print cartridge. When plastic tape covers the print cartridge contacts, the product
cannot detect that the print cartridge is installed.
Exit ink-backup mode
Install two print cartridges in the HP All-in-One to exit ink-backup mode.
Related topics
“
Replace the cartridges” on page 34
Cartridge warranty information
The HP cartridge warranty is applicable when the product is used in its designated HP
printing device. This warranty does not cover HP ink products that have been refilled,
remanufactured, refurbished, misused, or tampered with.
Chapter 7
36 Work with cartridges
Work with cartridges
 
						

							
During the warranty period the product is covered as long as the HP ink is not depleted
and the end of warranty date has not been reached. The end of warranty date, in YYYY/
MM/DD format, may be found on the product as indicated:
For a copy of the HP Limited Warranty Statement, see the printed documentation that
came with the product.
Cartridge warranty information 37
Work with cartridges