HP DeskJet F2280 User Manual

•Print a multiple-page document as a booklet 
•Print multiple pages on a single sheet
•Print a multiple-page document in reverse order 
•Reverse an image for iron-on transfers 
•Print on transparencies
•Print a group of addresses on labels or envelopes 
•Print a poster 
•Print a Web page
Print a borderless image
Borderless printing lets you print to the top, bottom, and side edges of 10 x 15 cm (4 x 6 
inch) HP Premium Plus Photo Papers with a tear-off tab. When you remove the tear-off 
tab, the printed...

6.Click the Features tab. 
7. In the Size list, click the size of photo paper loaded in the input tray. 
If a borderless image can be printed on the specified size, the  Borderless printing 
check box is enabled. 
8. In the Paper Type drop-down list, click More, and then select the appropriate paper 
type.
NOTE: You cannot print a borderless image if the paper type is set to Plain 
paper  or to a type of paper other than a photo paper.
9.Select the Borderless printing check box if it is not already...

6.In the Basic Options area, select the appropriate photo paper type from the Paper 
Type  drop-down list. 
7. In the Resizing Options area, click the appropriate paper size from the Size list. 
If the paper size and paper type are not compatible, the product software displays an 
alert and allows you to select a different type or size. 
8. In the Basic Options area, select a high print quality, such as Best, from the Print 
Quality  drop-down list.
NOTE:For maximum dpi resolution, go to the Advanced...

To print in Maximum dpi mode 
1. Make sure you have paper loaded in the input tray. 
2. On the File menu in your software application, click Print. 
3. Make sure the product is the selected printer. 
4. Click the button that opens the Properties dialog box. 
Depending on your software application, this button might be called  Properties, 
Options , Printer Setup, Printer, or Preferences. 
5. Click the Advanced tab. 
6. In the Printer Features area, select Enabled from the Maximum dpi drop-down list. 
7....

7.For binding, do one of the following: 
• For binding on the top like a notebook or calendar, select the  Flip Pages Up check 
box. 
This causes the odd and even pages of your document to print opposite of each 
other top-to-bottom. This ensures that the top of the page is always at the top of 
the sheet when you flip the pages up in your bound document.
• For binding on the side like a book or magazine, click to clear the  Flip Pages 
Up  check box. 
This causes the odd and even pages of your document...

To print a multiple-page document as a booklet 
1. Load paper into the input tray. 
The paper should be thick enough so that the images do not show through to the 
other side. 
2. On the File menu in your software application, click Print. 
3. Make sure the product is the selected printer. 
4. Click the button that opens the Properties dialog box. 
Depending on your software application, this button might be called  Properties, 
Options , Printer Setup, Printer, or Preferences. 
5. Click the Features...

Figure 7-1 Left-edge binding for left-to-right languages
Figure 7-2 Right-edge binding for right-to-left languages
Chapter 7 
44 Print from your computer
Print
 

Print multiple pages on a single sheet
You can print up to 16 pages on a single sheet of paper.
12
43
To print multiple pages on a single sheet 
1. Make sure you have paper loaded in the input tray. 
2. On the File menu in your software application, click Print. 
3. Make sure the product is the selected printer. 
4. Click the button that opens the Properties dialog box. 
Depending on your software application, this button might be called  Properties, 
Options , Printer Setup, Printer, or Preferences. 
5....

Print a multiple-page document in reverse order
Because of the way the paper feeds through the HP All-in-One, the first page that prints 
is print side up at the bottom of the stack. Usually this means you need to put the printed 
pages in the correct order.
A better way is to print the document in reverse order so that the pages are stacked
correctly.
TIP: Set this option as a default setting so you do not have to remember to set it 
every time you print a multiple-page document.
To print a...

Reverse an image for iron-on transfers
This feature reverses an image so you can use it for iron-on transfers. This feature is also 
useful for transparencies when you want to make notations on the back of the 
transparency without scratching the original.
To reverse an image for iron-on transfers 
1. On the File menu in your software application, click Print. 
2. Make sure the product is the selected printer. 
3. Click the button that opens the Properties dialog box. 
Depending on your software...