HP DeskJet F2280 User Manual

Chapter 1 
8 HP Deskjet F2200 All-in-One series Help
HP Deskjet F2200 All-in-One series 
Help
 

2 HP All-in-One overview
The HP Deskjet F2200 All-in-One series is a versatile device that enables easy-to-use 
copying, scanning, and printing. 
Copy
The HP All-in-One allows you to produce high-quality color and black-and-white copies 
on a variety of paper types. You can enlarge or reduce the size of an original to fit a 
specific paper size, adjust the copy quality, and make high-quality copies of photos. 
Scan
Scanning is the process of converting text and  pictures into an electronic format for...

LabelDescription
3Tray extender
4Paper-width guide
5Print cartridge door
6Glass
7Lid backing
8Rear access door
9Rear USB port
10Power connection*
* Use only with the power adapter supplied by HP.
Control panel buttons
LabelIconName and Description
1On: Turns the HP All-in-One on or off. The On button is lit when the HP All- in-One is powered on. The light blinks while performing a job. 
When the HP All-in-One is off, a minimal  amount of power is still used by the device. To completely disconnect the po...

LabelIconName and Description
cartridge, and the Color light indicates that the problem is with the tri-color print cartridge.
3Cancel : Stops a print, copy, or scan job.  
A blinking  Paper light next to the Cancel button indicates the need to load paper or clear a paper jam. Press any button after a problem is solved toinstruct the HP All-in-One to continue.
4Scan : Starts scanning the original currently on the glass. The Scan command is ignored if the HP All-in-One is busy with any other job. The Scan...

Status light overview
Several indicator lights inform you of the status of the HP All-in-One.
LabelDescription
1On light
2Check Print Cartridge lights
3Paper light
4Paper Type lights (for the Paper Type button)
The following table describes common situations and explains what the lights mean.
Light statusWhat it means
All lights are off.The HP All-in-One is turned off. Press the On button to turn on the device.
The On light and one of the Paper Type  lights are on.The HP All-in-One is ready for printing,...

Light statusWhat it means
•The print cartridge is not intended for use in this HP All-in-One.
•The print cartridge might be defective.
•The print cartridge is low on ink.
The On, Paper, and Check Print Cartridge lights are blinking.Scanner failure. For more information, see Scan fails . 
Turn off the HP All-in-One, then turn it on again. If the problem persists, contact HP Support. 
NOTE: HP All-in-One will still operate as a printer.
All lights are blinking.The HP All-in-One has a fatal error. 
1. Turn...

Chapter 2 
14 HP All-in-One overview
HP All-in-One overview
 

3 Find more information
You can access a variety of resources, both printed and onscreen, that provide 
information about setting up and using the HP All-in-One.
Setup Guide 
The Setup Guide provides instructions  for setting up the HP All-in-One and installing software. Make sure you follow the steps in the Setup Guide in order. 
If you have problems during setup, check the Setup Guide for troubleshooting information, or see Troubleshooting  in this onscreen Help.
Basics Guide 
The Basics Guide contains...

Chapter 3 
16 Find more information
Find more information
 

4 How do I?
This section contains links to commonly performed tasks, such as printing photos and 
optimizing your print jobs. 
•How do I change the print settings? 
•How do I print borderless photos on 10 x 15 cm (4 x 6 inch) paper? 
•How do I load envelopes? 
•How do I scan using the control panel?
•How do I get the best print quality? 
•How do I print on both sides of the paper? 
•How do I replace the print cartridges?
•How do I align the print cartridges?
•How do I clear a paper jam?
How do I? 17
How...