HP DeskJet 1000 User Manual

HP Deskjet 1000 J110 series
 

Contents
1 How Do I?..................................................................................................................................3 
2Get to know  the HP Printer 
Printer parts.................................................................................................................. ..............5 
On button...................................................................................................................... ..............5 
3Print 
Print...

2
Contents
 

1How Do I?
Learn how to use your HP Printer 
•Printer parts 
•Load media 
•Replace the cartridges 
•Clear a paper jam
How Do I? 3
How Do I?
 

Chapter 1 
4 How Do I?
How Do I?
 

2 Get to know the HP Printer
•Printer parts 
•On button
Printer parts
1Input tray
2Paper width guide
3On button: Turns the product on or off. When the product is off, a minimal amount of power is 
still used. To completely remo ve power, turn off the product, then unplug the power cord.
4Output tray
5Output tray extender (also referred to as the tray extender)
6Cartridge door
7Print cartridges
8USB port
9Power connection: Use only with the power adapter supplied by HP
On button
On button 5
Get to know...

•When the product is turned on, the On button light will be lit. 
• When the product is processing a job, the On button light will be blinking. 
• If the On button light is blinking very quickly, the printer is in an error state that you 
can resolve by following the onscreen messages. If you do not see any onscreen
messages, try printing a document to generate an onscreen message. 
• If you cleared a paper jam or the printer was out of paper, you will need to press the 
On  button to resume printing....

3Print
Choose a print job to continue.
Print documents
Print photos
Print envelopes
Print documents
To print from a software application 
1. Make sure the output tray is open. 
2. Make sure you have paper loaded in the input tray.
3.From your software application, click the Print button. 
4. Make sure the product is the selected printer. 
5. Click the button that opens the Properties dialog box. 
Depending on your software application, this button might be called  Properties, 
Options , Printer Setup,...

7.Click OK to close the Properties dialog box. 
8. Click Print or OK to begin printing.
NOTE:You can print your document on both sides of the paper, instead of just one 
side. Click on the  Advanced button on the Paper/Quality or Layout tab. From the 
Pages to Print  drop-down menu select Print Odd Pages Only. Click OK to print. 
After the odd numbered pages of the document have been printed, remove the
document from the output tray. Reload the paper in the input tray with the blank side 
facing up....