HP Designjet Z6200 1524 mm Photo User Manual

Change the language of the front-panel display
There are two possible ways to change the la nguage of the front-panel menus and messages.
● If you can understand the curr ent front-panel display language , select the Setup menu icon 
,
then  Front panel options  > Select language.
● If you cannot understand the current front-panel 
display language, start with the printer powered
off. At the front panel, press the  OK key and hold it down. While holding the  OK key down, press
the  Power key and hold it...

Japanese. It uses whichever language you have specified in your Web browsers options. If you have
specified a language that it cannot support, it works in English.
To change the language, you must change your  Web browsers language setting. For example, in
Internet Explorer version 6, go to the  Tools menu and select Internet Options, Languages . Then
ensure that the language you want is at  the top of the list in the dialog box.
Access the HP Utility
The HP Utility enables you to manage your printer...

Change the front-panel display contrast
To change the contrast of the front-panel display, select the Setup menu icon , then Front panel
options  > Select display contrast , and enter a value using the  Up or Down key. Press the  OK key
to set the value. The defaul t contrast is set to 50.
Change the units of measurement
To change the units of measurement in the fron t-panel display, select the Setup menu icon , then
Front panel options  > Select units , and select English or Metric . By default the...

To configure the same network settings from the front panel, select the Connectivity menu icon ,
then  Fast Ethernet  or Gigabit Ethernet  > Modify configuration .
You have various other options available from the Connectivity menu icon.
● USB: view information about the USB connection
● Jetdirect EIO: view information, configure and reset the Jetdirect connection
● Advanced >  Select I/O timeout : specify the number of seconds that an idle connection is
allowed to remain open, 270 is the default va lue,...

Personalize the list of paper types
If there are some paper types that you never use, you can remove  them from the list shown in the front
panel, the Embedded Web Server and the HP Utility.
1. In the Embedded Web Server, select the  Setup tab and then  Paper management .
2. In the Paper Manageme nt pane, select the Show/Hide papers  tab.
3.Select any paper type you want to hide, and use the  >> button to move it to  the hidden paper list.
4. When you have finished, use the  Apply button to save your...

Select paper mismatch action
If the paper currently loaded in the printer is not suitable for a  particular job, the printer can either put
the job on hold until some suitable paper is loade d, or it can ignore the problem and print the job on
the unsuitable paper. There are two ways in which the loaded paper may be considered unsuitable:
● The paper type is not as specified for the job
● The paper size is smaller than specified for the job
You can set the printers behavior in  such cases from the front...

4 Handle the paper
●Overview
●
Load a roll onto the spindle
●
Load a roll into the printer
●
Unload a roll from the printer
●
Use the take-up reel
●
View information about the paper
●
Perform paper advance calibration
●
Download paper presets
●
Use non-HP paper
●
Cancel the drying time
●
Change the drying time
●
Printing paper info
●
Feed and cut the paper
●
Store the paper
●
Order paper
ENWW 29
Handle the paper
 

Overview
Paper is only a subset of the portfolio of printing materials that the printer can handle. You can also
print on a wide variety of films, textiles and fa brics, self-adhesive materials, and banner and sign
materials. Throughout this guid e, however, these materials are  generally referred to as paper.
NOTE:Because the front panel has limited space, the names of the HP paper might be abbreviated
and might not appear in the front panel exactly as they are shown on the packaging label.
NOTE:...

●Make sure that the appropriate pr
int-quality setting (Best, Normal, or Fast) is selected. You can set
the print quality in the driver, in the Embedded Web Server, or on the front panel. Driver or
Embedded Web Server settings override front pa nel settings. The combination of paper type and
print-quality settings tells the printer how to pl ace the ink on the paper—for example, the ink
density and halfto ning method. See 
Select print quality on page 82.
● Although the ink systems that are supplied with...

Table 4-1  Supported paper types
Paper type Paper name Front panel name
Bond and Coated Paper HP Super Heavyweight Plus Matte Paper HP Matt Super HW Plus
HP Heavyweight Coated Paper HP HW Coated Paper
HP Universal Heavyweight Coated  PaperHP Uni HW Coated Paper
HP Coated Paper HP Coated Paper
HP Universal Coated Paper HP Uni Coated Paper
HP Bright White Inkjet Paper HP Bright White IJ Paper
HP Universal Bond Paper HP Universal Bond Paper
HP Recycled Bond Paper HP Recycled Bond Paper
Super heavyweight...