HP Designjet Z6200 1067mm Photo User Manual

NOTE:For additional information about the ink system, see Handle the ink system on page 57.
Task 4: Handle print jobs
After checking ink consumables and  paper levels, you can send the job to the printer. On the screen
preview, make adjustments for paper type, print size, number of copies and nesting as necessary. You
can then move the job to the RIP queue.
The table below identifies sections of this user’s guid e which will help you to quickly find information on
handling print jobs.
Table A-3   Handle...

Table A-4  Handle the ink system (continued)
Task Elements See this section of the user’s guide
Troubleshooting See this section of the guide
I am experiencing prin t quality problems See 
Troubleshoot print-quality issues on page 144
NOTE:For additional information about adjusting printed images, see Print options on page 80.
NOTE: For additional information about unloading a ro ll from the take-up reel after printing, see
Unload a roll from the take-up reel on page 43.
184 Appendix A   Overnight job...

B Urgent walk-in job scenario
In this scenario, the print service provider (PSP) receives an urgent walk-in order which requires delivery
in less than two hours. Th e printer is currently printing and ther e are jobs in the queue, however, the
new job has the highest priority. It also requires di fferent paper than what is currently in the printer.
NOTE:The new job is a repeat order for which the d igital content already exists within the ripped
files storage.
The following information describes the...

Table B-1  Handle print jobs
Task Elements See this section of the user’s guide
Submit a job See 
Create a print job on page 81
Cancel a job See 
Delete a job from the queue on page 115
Manage the print queue See 
Job queue management on page 112
Troubleshooting See this section of the guide
I cant access the Embedded Web
Server See 
Cannot access the Embedded Web Server on page 171
NOTE:
To improve color consistency between prints  or from one printer to another, consider
performing a color calibration....

Table B-2  Handle the paper (continued)
Task Elements See this section of the user’s guide
The take-up reel paper has jammed See 
Take-up reel paper jammed on page 162
The take-up reel does not wind See 
Take-up reel does not wind on page 162
NOTE: For additional information about paper, see Handle the paper on page 29.
Task 4: Handle the ink system
Ensure that your printheads are healthy and that ink le vels are enough to print all queued jobs. If the ink
levels are too low, pause the print queue and...

Table B-4  Handle the ink system
Task Elements See this section of the user’s guide
Select print quality See 
Select print quality on page 82
Select paper size See 
Select paper size on page 84
Select margins options See 
Select margins options on page 85
Rescale a print See 
Rescale a print on page 86
Change the treatm ent of overlapping
lines See 
Change the treatment 
of overlapping lines on page 88
Print in grayscale See 
Print in gray shades on page 91
Print crop lines See 
Print crop lines on page...

C Front-panel menus
This appendix lists and explains the options in the front-panel menu system.
NOTE:Firmware updates may introduce changes to th e menu system, in which case this appendix
will become out of date in some respects.
To print a more graphical and up-to-date diagram of  the front-panel menus, go to the front panel and
select the 
 icon, then  User information prints  > Print menu map .
●
Paper menu
●
Job management menu
●
Ink menu
●
Setup menu
●
Image quality maintenance menu
●
Connectivity...

Paper menu
Paper loadLoad roll 
Load take-up reel  
Learn how to load spindle  
Paper unload Unload roll 
Unload take-up reel  
View loaded paper   
Change active paper type (select paper category and type)  
Paper types list (select paper category and type) View paper details
Move paper   
Take-up reel Enable take-up reel 
View information  
Load roll and Load take-up reel display illustrations of the loading process. These options are
locked if paper is already loaded.
Learn how to load spindle...

Job management menu
Reprint last job  
Pause (or Resume) printing   
Job queue Queue is empty [J] 
(select job) [J] View information
Continue
Move to front
Copies
Reprint
Cancel
Delete
Job queue  displays the jobs in the job queue. Jobs  remain in the queue after being printed.
View information displays the following information abou t the selected job: Name, Status, Date,
Printed copies and Pages.
Continue  releases for printing a job that is on hold.
Move to front  moves the selected job to the front...

Ink menu
View ink levels  
View printhead status   
Replace ink cartridges   
Replace printheads   
Replace maintenance ctg.   
Replace ink absorber   
Ink cartridge information View (color) ink cartridge 
Printhead information View (colors) printhead  
Maintenance cartridge information    
Ink absorber information   
Clean encoder strip   
View ink levels displays the ink levels of all cartridges  in the printer. A blinking cartridge in the
display indicates warns you that the ink level is low.
View...