HP Designjet Z6200 1067mm Photo User Manual

DESIGNJET Z6200 Photo printer series
Using your printer
 

© 2010 Hewlett-Packard Development
Company, L.P.
1st editionLegal notices
The information contained in this document
is subject to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such pr
oducts and services.
Nothing contained in other sections different
from the express warranty should be
construed as constituting an additional
warranty. HP shall not be liable for technical
and editorial errors or omissions contained...

Table of contents
1  Introduction ...................................................................................................................... 1
Safety precautions ............................................................................................................ ........ 2
Product models ................................................................................................................ ........ 2
Use of this guide...

Load a roll onto the spindle ..................................................................................................... 33
Load a roll into the printer .................................................................................................. ..... 36
Unload a roll from the printer ................................................................................................ .. 37
Use the take-up reel...

Color calibration .................................................................................................................. 101
Color profiling ............................................................................................................... ...... 102
Color-management options .................................................................................................... 1 04
Color-adjustment options...

13  Troubleshoot print-quality issues ................................................................................ 144General advice ................................................................................................................ .... 145
Troubleshooting tools ......................................................................................................... ... 145
Lines are too thick, too thin, or missing...

16  Troubleshoot other issues ........................................................................................... 169The printer is not printing ................................................................................................... ... 170
The software program slows down or stalls while generating the print job ................................... 170
The printer seems slow ........................................................................................................ .. 170...

Appendix E  Printer specifications .....................................................................................  203
Functional specifications ..................................................................................................... .. 204
Physical specifications ....................................................................................................... ... 205
Memory specifications...

1 Introduction
●Safety precautions
●
Product models
●
Use of this guide
●
The printer’s main features
●
The printer’s main components
●
The Embedded Web Server’s main components
●
The HP Utility’s main features
●
The printer’s internal prints
●
Turn the printer on and off
ENWW 1
Introduction
 

Safety precautions
The following precautions ensure the correct use of the printer and prevent printer damage. Use these
precautions at all times.
● Use the power supply voltage that is specified on the nameplate. To avoid overloading the
printers electrical outlet, do not 
use the outlet for multiple devices.
● Make sure that the printer is well-grounded. Failur
e to ground the printer can result in electrical
shock, fire, and susceptibility to  electromagnetic interference.
● Do not disassemble or...