HP Designjet Z6200 1067mm Photo User Manual

NOTE:If you want to move the printer, first remove  the take-up reel sensor and cable housing unit
from the foot of the printer stand. Place the sensor  and cable housing unit on the printer stand crossbar
and use the blue plastic screw to affix the housing un it to the leg of the stand, as shown, while the
printer is being moved. When reinstalling the housing  unit, make sure that the wheel on the foot of the
printer stand is pointing forward.
Unload a roll from the take-up reel
1. On the printers front...

4.Remove the loop-shaping core.
5.Use the winding button on the take-up reel motor to
 wind the excess paper around the take-up reel
spindle.
6. Press the 
OK key on the front panel.
7. The printer knows if the type of paper that is load
ed is suitable for the automatic paper-cutter. The
paper is cut if it is suitable. If the pap er is not suitable, cut the paper manually.
NOTE:The automatic paper-cutter feature is disabl ed for some of the heaviest paper types,
because they can damage the cutter.
44...

8.Use the winding button on the take-up reel motor 
to wind the remainder of the paper around the
take-up reel spindle.
9. Press the 
OK key on the front panel.
The amount of printed paper that is on the ta ke-up reel spindle appears on the front panel.
10. Unlock the take-up reel spindle by pushing 
the spindle lever to its uppermost position.
11.Remove the roll from the printer, 
pulling out the end on the right si de of the printer first. Do not
insert your fingers into the spindle supports during the...

View information about the paper
On the printers front panel, press the  key. Alternatively, select the  icon, then View loaded
paper .
The following information appears on the front panel:
● The roll status
● The paper type that you have selected
● The width of the paper in millimeters (estimated by the printer)
● The length of the paper in millime
ters (estimated by the printer)
● The color calibration status
● The paper advance calibration status
If no paper is loaded, the message  Out of paper...

Overview of the paper advance procedure
1.On the front panel, select the  icon, and then select  Image quality maintenance  >
Paper advance calibration  > Calibrate paper advance . The printer automatically
calibrates the paper-advance and prin ts a paper advance calibration image.
2. Wait until the front panel shows the stat
us screen, and then reprint your image.
NOTE:The calibration procedure takes approximat ely six minutes. The front-panel display
shows any errors in the process.
If you are...

You can assign a preset for a new paper type in three ways:
● Use an HP factory paper preset by selecting the 
closest category and type on the front panel or in
the HP Utility
NOTE: Because colors might not be accurate, this  method is not recommended for high-quality
prints.
● Download the correct paper preset from: http://www.hp.com/go/Z6200/paperpresets/
.
NOTE:HP provides presets for HP paper types only. If  you do not find the paper preset that you
want on the Web, it might have been added to  the...

9.To create an ICC profile, which allows you to pr
int on your paper with the best possible color
accuracy, see 
Color profiling on page 102 .
10. Perform paper advance calibration (see 
Perform paper advance calibration on page 46
). The
default paper advance values for your custom pa per are inherited from the paper category, but
can probably be improved by calibration.
Cancel the drying time
Press the  Form Feed and Cut  key  on the front panel.
CAUTION:A print that has not dried sufficiently can...

To disable the Printing paper info  option, select the  icon in the printers front panel, and then
select  Printing preferences  > Paper options  > Disable printing paper info . In this case, the
length will not be requested, and the  barcode will be neither printed nor read.
Feed and cut the paper
If you press the Form feed and cut  key  on the front panel, the printer advances the paper and makes
a straight cut across the front edge . There are several possible reason s why you might want to do this.
●...

●(L) indicates papers that ar
e available in Latin America
● (N) indicates papers that are available in North America
If the part number is not followed by paren theses, the paper is available in all regions.
Table 4-2  Paper
Paper type g/m² Length WidthPart numbers
HP Bond and Coated Paper
HP Super Heavyweight Plus Matte
Paper 210 30.5 m (100 ft) 610 mm (24 in)
Q6626A
914 mm (36 in) Q6627A
1067 mm (42 in) Q6628A
1524 mm (60 in) Q6630A
HP Heavyweight Coated Paper 131 30.5 m (100 ft) 610 mm (24 in) C6029C...

Table 4-2  Paper (continued)
Paper type g/m² Length WidthPart numbers
HP Bright White Inkjet Bond Paper 90 45.7 m (150 ft) 420 mm (16.54 in) Q1446A (J) 594 mm (23.39 in) Q1445A (EJ)
610 mm (24 in)C1860A (LN),
C6035A (AEJ)
841 mm (33.11 in) Q1444A (EJ)
914 mm (36 in) C1861A (LN),
C6036A (AEJ)
91.4 m (300 ft) 914 mm (36 in) C6810A
HP Universal Bond Paper 80 45.7 m (150 ft) 594 mm (23.39 in) Q8003A (AJ)
610 mm (24 in)Q1396A
914 mm (36 in) Q1397A
1067 mm (42 in) Q1398A
175 m (574 ft) 594 mm (23.39 in) Q8004A...