HP Designjet Z3200 44 in User Manual

If your computer fails to find any printers on the network, the Printer Not Found window is displayed,
which helps you to try to find your printer. If you have a firewall in operation; you may have to disable it
temporarily in order to find the printer. You also have the options of searching for the printer by its URL,
IP address or MAC address.
NOTE:Although IPv6 is supported, automatic installation of the printer driver is not guaranteed to work
with it, so you may need to use the standard Windows Add...

Uninstall the printer software (Windows)
1.Insert the HP Start-Up Kit CD into your CD drive. If the CD does not start automatically, run the
autorun.exe program in the root folder of the CD.
2.Select Modify Installation and follow the instructions on your screen to uninstall the printer
software.
Connect to a network (Mac OS)
You can connect your printer to a network under Mac OS X by using the following methods:
●Bonjour/Rendezvous
●TCP/IP
NOTE:The printer does not support AppleTalk.
Before you begin,...

6.The printer software is installed, including the printer driver and the HP Printer Utility.
7.When the software has been installed, the HP Printer Setup Assistant starts automatically, to set
up a connection to your printer. Follow the instructions on your screen.
8.When you reach the Select Printer screen, look for your printers mDNS service name (which you
noted in step 1) in the Printer Name column.
●If you find the right printer name, scroll sideways to see the Connection Type column, and
check...

TCP/IP connection
1.Go to your printers front panel and press the Menu key until you see the status screen.
Note the URL of your printer (http://XXXX11 in this example).
2.Insert the HP Start-Up Kit CD into your CD drive.
3.Open the CD icon on your desktop.
4.Open the Mac OS X HP Designjet Installer icon.
5.Follow the instructions on your screen. You are recommended to use the Easy Install option.
6.The printer software is installed, including the printer driver and the HP Printer Utility.
7.When the...

9.Continue following the instructions on the screen. When you reach the Printer Queue Created
screen, click Quit to exit, or Create New Queue if you want to connect another printer to the
network.
10.When the HP Printer Setup Assistant has finished, you can remove the CD from the CD drive.
If the printer driver is already installed, the HP Printer Setup Assistant can be run at any time from the
CD.
Connect directly to a computer (Mac OS)
You can connect your printer directly to a computer without going...

12.Your printer is now connected. In the Printer Queue Created screen, click Quit to exit, or Create
New Queue if you want to connect another printer.
13.When the HP Printer Setup Assistant has finished, you can remove the CD from the CD drive.
If the printer driver is already installed, the HP Printer Setup Assistant can be run at any time from the
CD.
Sharing the printer
If your computer is connected to a network, you can make your directly connected printer available to
other computers on the same...

3 Personalizing the printer
●Turn printer on and off
●
Change the language of the front-panel display
●
Access the HP Printer Utility
●
Access the Embedded Web Server
●
Change the language of the HP Printer Utility
●
Change the language of the Embedded Web Server
●
Change the sleep mode setting
●
Turn the buzzer on and off
●
Change the front-panel display contrast
●
Change the units of measurement
●
Configure network settings
ENWW17
Personal settings
 

Turn printer on and off
TIP:The printer can be left powered on without wasting energy. Leaving it on improves response time
and overall system reliability. When the printer has not been used for a certain period of time (the default
time is determined by Energy Star), it saves power by going into sleep mode. However, any interaction
with the printers front-panel display returns it to active mode, and it can resume printing immediately.
To change the sleep mode time, see 
Change the sleep mode setting on...

Change the language of the front-panel display
There are two possible ways to change the language of the front-panel menus and messages.
●
If you can understand the current front-panel display language, select the Setup menu icon 
,
then Front panel options > Select language.
●If you cannot understand the current front-panel display language, start with the printer powered
off. At the front panel, press the OK key and hold it down. While holding the OK key down, press
the Power key and hold it down....

To access the Embedded Web Server on any computer, open your Web browser and give the address
of your printer. You can find out the address of your printer (starting with http:) from the front-panel
display, by looking at the status screen.
If you have followed these instructions but failed to get through to the Embedded Web Server, see
Cannot access the Embedded Web Server on page 147.
Change the language of the HP Printer Utility
The HP Printer Utility can work in the following languages: English,...