HP DesignJet T610 A0 User Manual

You can rescale an image in the following ways:
●In the Windows driver dialog: select the Effects tab, then Resizing options.
◦The Print document on option adjusts the image size to the paper size you have selected.
For example, if you have selected ISO A2 as the paper size and you print an A3-sized image,
it is enlarged to fit the A2 paper. If the ISO A4 paper size is selected, the printer reduces a
larger image to fit the A4 size.
◦The % of normal size option enlarges the printable area of the original...

You can specify even faster draft-quality printing by using Economode, as follows. This is intended
mainly for documents containing only text and line drawings.
●In the Windows driver dialog: go to the Paper/Quality tab and look at the Print Quality section.
Select Custom Options, then set the quality level to Fast and check the Economode box.
●In the Mac OS Print dialog: go to the Paper Type/Quality panel and select Paper, then set the
quality options to Custom, set quality to Fast, and check the...

Print in gray shades
You can convert all colors in your image to shades of gray in the following ways:
●In your application program: many programs provide this option.
●In the Windows driver dialog: go to the Color tab and look at the Color Options section.
Select Print In Grayscale. You can also select Print in Pure black and white if you want only
black and white, without gray shades.
●In the Mac OS Print dialog: go to the Paper Type/Quality panel and select Color, then select
Print In Grayscale. You...

Use paper economically
You may be able to save some roll paper by using the following options:
●In the Windows driver dialog: select the Features tab and then Remove top/bottom blank
areas and/or Rotate by 90 degrees.
●In the Mac OS Print dialog: select the Paper Type/Quality panel, then Paper, then Remove Top/
Bottom Blank Areas.
Use ink economically
Here are some recommendations for making economical use of ink.
●For draft prints, use plain paper and move the print-quality slider to the left end of the...

7 Color management
●Introduction
●
How colors are represented
●
A summary of the color management process
●
Color calibration
●
Color management from printer drivers
●
Color management from the front panel
ENWW55Color management
 

Introduction
HP Designjet T610 printers have been engineered with advanced hardware and software features to
ensure predictable and dependable results.
●Color calibration for consistent colors.
●One gray and two black inks provide neutral grays on all paper types.
●The Photo Black ink provides pure blacks when printing on photo papers.
●Color emulation of other HP Designjet printers.
How colors are represented
All devices that display color use a color model to represent color in numerical terms. Most...

You can check the color calibration status of the currently loaded paper at any time by pressing the
View loaded paper key on the front panel. The status may be one of the following:
●PENDING: the paper has not been calibrated.
NOTE:Whenever you update the printers firmware, the color calibration status of all papers is
reset to PENDING.
●OBSOLETE: the paper has been calibrated, but the calibration is now out of date because a
printhead has been replaced, and should be repeated.
●DONE: the paper has been...

There are two basic approaches to color management for your printer:
●Application-Managed Colors: in this case your application program must convert the colors of
your image to the color space of your printer and paper type, using the ICC profile embedded in
the image and the ICC profile of your printer and paper type.
●Printer-Managed Colors: in this case your application program sends your image to the printer
without any color conversion, and the printer converts the colors to its own color space....

Printing in color
You can adjust the colors of your print in similar ways under Windows and Mac OS:
●In the Windows driver dialog: select the Color tab, ensure that the Advanced Color
Adjustments box is checked, then press the Settings button beside it.
●In the Mac OS Print dialog: select the Paper Type/Quality panel, then Lightness and Hue.
Under either operating system, you will then be able to make adjustments using a lightness slider and
three color sliders.
●The lightness slider simply makes the...

●The lightness slider simply makes the whole print lighter or darker. This slider is available under
Windows in the same window as the other grayscale controls; it is available under Mac OS by
selecting Lightness and Hue.
●The zone definition sliders can be used to define what you mean by highlight, midtone, and shadow.
●The other controls for highlight, midtone, and shadow can be used to adjust the gray balance of
highlights, midtones, and shadows respectively.
The Reset button restores each control to...