HP DesignJet T610 A0 User Manual

6.The printer checks the alignment and measures the sheet.
NOTE:Depending on the length of the sheet, it feeds out the front of the printer.
7.If the paper has been loaded successfully, the front panel displays the Ready message and the
printer ready to print. If the paper is not straight, follow the instructions on the front-panel display.
NOTE:When correctly loaded, the sheet is in the back of the printer.
NOTE:If you have an unexpected problem at any stage of the paper loading process, see The paper...

4.Select Load sheet.
CAUTION:If you select roll, the sheet will not load.
5.Select your paper category and type.
TIP:If you have loaded a paper type whose name does not appear in the paper list, see The
paper type is not in the driver on page 116.
6.Continue with step two of the easy loading procedure, skipping steps four and five.
Unload a single sheet
To unload a single sheet after printing, you can simply pull the sheet free from the front of the printer.
To unload a sheet without printing, use the...

2.Select Unload paper. The sheet unloads out of the front of the printer, either catch it manually or
allow it to fall in the basket.
View information about the paper
To view the loaded paper information, press the View loaded paper key  on the front panel.
You can also select the Paper menu icon 
 and then View loaded paper.
The following information is displayed on the front panel:
●Roll or sheet status
●Paper type you have selected
●Width of the paper in millimeters (estimated)
●Length of the sheet in...

There are two ways to assign a profile for a new paper type.
●Use a HP factory paper profile by selecting the closest category and type in the front panel, HP
Easy Printer Care (Windows), or HP Printer Utility (Mac OS), see 
The paper type is not in the
driver on page 116.
NOTE:Colors may not be accurate. This method is not recommended for high-quality prints.
●Download the correct paper profile from: http://www.hp.com/go/designjet/downloads
NOTE:HP only provides profiles for HP paper types. If you do...

NOTE:If you cancel the drying time during a print, the printer may not feed and cut the paper right
away due to the printhead maintenance, which runs in parallel. If the dry time is zero, the printer cuts
the paper and then performs the printhead maintenance. However, if the dry time is greater than zero,
the printer does not cut the paper until after the printhead maintenance has completed, even if you press
the Form feed and cut key 
.
Turn the automatic cutter on and off
To turn the printers paper...

46 Chapter 5   Paper handling ENWW
Paper handling
 

6Printing
●Select print quality
●
Select paper size
●
Select margins options
●
Print with shortcuts
●
Rescale a print
●
Change the treatment of overlapping lines
●
Print a draft
●
High-quality printing
●
Print in gray shades
●
Print with no margins
●
Reprint last printed job
●
Use paper economically
●
Use ink economically
ENWW47
Printing
 

Select print quality
The printer has various print-quality options because best-quality printing requires some loss of speed,
while fast printing implies some reduction in print quality.
Therefore, the standard print-quality selector is a slider that allows you to choose between quality and
speed. With some paper types, you can choose a compromise position between the two.
Alternatively, you can select from the custom options: Best, Normal, and Fast. If you select Fast, you
can also select Economode,...

Custom paper sizes
To choose a non-standard paper size not shown in the list of paper sizes:
●Under Windows, there are two different ways:
◦In the driver dialog, select Custom from the paper size list in the Paper/Quality tab, then
specify the paper dimensions, then click Save to save your new paper size. To see your new
custom size in the list of custom sizes, you need to exit the printer properties, then reenter
them (and use the More button if necessary).
◦From the Start menu, select Printers and...

job, so that you can set them all with a single click. Some settings (such as paper size, paper source,
and orientation) may be overridden by the values provided by your application.
To use a shortcut, select the Printing Shortcuts tab in the Windows driver dialog.
NOTE:Shortcuts are available only under Windows.
You can see a list of available shortcuts; select the one that matches the kind of job you want to print.
The driver options are now adjusted to suit your job. You can either print immediately,...