HP DesignJet 9000s User Manual

							NOTEHP ink cartridges must be installed before the “Install By” printed on the cartridge.
Use of the ink cartridge 3 months beyond the “Install By” date may cause deterioration in print
quality or a printer malfunction.
Store ink cartridges in a dry, cool, and dark place.
Always use the recommended consumables (media, ink, etc.). Failure to follow this instruction
may cause poor print quality or a breakdown.
HP 790 Waste Ink Bottle
The HP 790 Waste Ink Bottle is used for collecting waste ink that is discharged from the printer during
cleaning processes. Only use our recommended HP 790 Waste Ink Bottle.
WARNING!Waste ink is combustible. Keep an HP waste ink bottle containing waste ink
away from open flames, sparks, or other sources of ignition.
WARNING!Avoid contact between ink and skin, eyes, and clothing.
Immediately wash skin with soapy water.
Remove clothing soaked with ink from contact with skin.
Use an approved eye wash station if ink is splashed into eyes and consult a doctor if
necessary.
If an approved eye wash station is unavailable, flush eyes with cold water and consult a doctor
if necessary.
Do not swallow ink. If swallowed, do not induce vomiting, but seek immediate medical attention.
WARNING!Use only an HP waste ink bottle. The bottle must be installed according to
instructions or waste ink may overflow.
An HP waste ink bottle must always be installed before turning the printer on. Automatic and
manual service cycles produce waste ink that must be contained in an HP waste ink bottle.
Precautions for handling the waste ink bottle
WARNING!Always securely replace the cap on a full or partially-full the HP waste ink bottle
after removing it from the printer to prevent ink spills.
The HP waste ink bottle contains organic solvents and must be disposed of in compliance with
all local, state, and federal regulations.
WARNING!Always use both hands to remove and carry an HP waste ink bottle.
Keep the HP waste ink bottle upright. Do not place on tables or shelves where it could fall.
HP 790 Cap Cleaning Liquid
HP 790 Cap Cleaning Liquid is used to clean and maintain the capping unit. The HP cap cleaning liquid
comes in six bottles, each containing 100 ml of cleaning liquid.
ENWWHP 790 Waste Ink Bottle 131
Tell me about the ink system
 
						

							WARNING!Avoid contact between ink and skin, eyes, and clothing.
Immediately wash skin with soapy water.
Remove clothing soaked with ink from contact with skin.
Use an approved eye wash station if ink is splashed into eyes and consult a doctor if
necessary.
If an approved eye wash station is unavailable, flush eyes with cold water and consult a doctor
if necessary.
Do not swallow ink. If swallowed, do not induce vomiting, but seek immediate medical attention.
HP 790 Wiper Cleaning Liquid and Dropper
The HP 790 Wiper Cleaning Liquid and Dropper are used to clean and maintain the wiper blades. The
HP 790 Wiper Cleaning Liquid comes in six bottles, each containing 100 ml, with ten droppers.
WARNING!Avoid contact between ink and skin, eyes, and clothing.
Immediately wash skin with soapy water.
Remove clothing soaked with ink from contact with skin.
Use an approved eye wash station if ink is splashed into eyes and consult a doctor if
necessary.
If an approved eye wash station is unavailable, flush eyes with cold water and consult a doctor
if necessary.
Do not swallow ink. If swallowed, do not induce vomiting, but seek immediate medical attention.
HP Cleaning Swabs
HP cleaning swabs are used for cleaning your printer parts. They are specifically designed to avoid
damage to your printer. They are designed not to leave particles or fibers on your printer when you
perform cleaning procedures.
HP 790 Storage Kit
The HP 790 Ink System Storage Kit is used to protect the ink tubes and printheads when the printer is
switched off for less than four weeks, and to prime the ink system when the printer is turned on again.
The HP 790 Ink System Storage Kit contains six Ink System Storage Liquid Cartridges and six Ink
System Purging Cartridges.
132 Chapter 12   Tell me about the ink system ENWWTell me about the ink system
 
						

							HP 790 Ink System Cleaning Kit
The HP Ink System Cleaning Kit is used to try to recover the printheads and clean the ink tubes when
the printer has been switched off for less than two weeks. The HP Ink System Cleaning Kit contains six
Cleaning Liquid cartridges and six Ink System Purging Cartridges.
ENWW HP 790 Ink System Cleaning Kit 133
Tell me about the ink system
 
						

							134 Chapter 12   Tell me about the ink system ENWW
Tell me about the ink system
 
						

							13 Tell me about waste management
It is the printer owner’s responsibility to ensure that waste is disposed of in accordance with all local,
state and federal regulations.
There are registered waste management companies that have been authorized by local authorities to
manage waste collection and disposal and that will manage waste management and disposal on your
behalf.
We recommend that you contact your local authorities for a list of authorized companies, or you can
search for the nearest authorized waste disposal company on the World Wide Web.
Make sure that any waste disposal company you engage for this task is able to provide you with the
necessary documentation proving their authority to manage and dispose of waste legally.
You will be legally responsible for failing to dispose of waste according to local, state and federal
legislation.
When you have established an authorized waste management company, they will need to know the
type of chemical that requires disposal and you will need to determine the type of agreement that best
meets your requirements.
They will need to know the common name or chemical CAS number of the main solvent found in the
supplies. This information can be obtained on the Material Safety Data Sheets (MSDS) available for all
supplies at 
http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/index.html
ENWW135
Tell me about waste
management
 
						

							There are normally two types of waste disposal services. The most suitable service will depend on your
waste volume production:
●Bottle by bottle and pick up on call : this may be the best option for low volume production to avoid
the overheads related to arranging and ensuring secure temporary storage. You can order these
bottles as needed from your local HP reseller.
●Storage in a suitable container for solvents and regular pick up: this may be the best option for high
volume waste production. An authorized waste management company will be able to advise you
on how this can be performed safely and in compliance with local guidelines and legislation.
General recommendations
●The HP 790 Waste Ink Bottle is specifically designed to resist chemical interaction with waste ink.
Do not use any other kind of container or bottle to collect the liquid. Consult your waste
management company to ensure you are following correct and safe procedures.
●Do not dispose of materials via the sanitary sewer or drains. Hazardous waste disposal is
regulated by local, state and federal regulations.
136 Chapter 13   Tell me about waste management ENWW
Tell me about waste
management
 
						

							●Store the full bottle in an area that has been prepared for this purpose until it is emptied or
removed by a waste management company for disposal. Consult your local authorities about
requirements or for advice on storing hazardous waste.
●The bottle is provided with an undetachable cap to safely and securely close the bottle to avoid
spillage when it is handled or transported.
●Use disposable latex or Nitrile(R) safety gloves to handle or transport the bottle once full.
●If you are emptying the HP supplied bottle into a larger container, use the container for this
chemical exclusively. Never mix this chemical with other chemicals in the same container. This
represents a serious safety hazard.
ENWWGeneral recommendations 137
Tell me about waste
management
 
						

							138 Chapter 13   Tell me about waste management ENWW
Tell me about waste
management
 
						

							14 Tell me about front panel menus
This chapter outlines the user menu structure and operations.
●Menu operations
●The INK menu & messages
●The MEDIA menu
●The MEDIA REG menu
●Media advance calibration
●The PH. MAIN menu
●The PH.RECOVERY menu
●The FEED menu
●The PRINTER menu
●The ADJUST menu
●The SETUP menu
ENWW139
Tell me about front panel menus
 
						

							Menu operations
When the ONLINE key is pressed in the online idle mode, the printer enters offline mode. A menu group
appears on the front panel and menu operations are enabled.
SHIFT
SHIFT
Menu structure
The Front panel menu has the following structure:
●Menu group — this menu is displayed at the first level. Some menus have several submenus.
●Second-level menus — these are submenus of the top menu group.
●Parameters — on selecting a menu item, you can select a value or command, or enter a value.
Making front panel selections and settings
To define a setting
1.Select a menu with the arrow keys.
For example, select the MEDIA REG menu with the ▼ key.
2.Select an option in the MEDIA REG menu with the ▲ and ▼ keys.
For example, select PRINT MODE. You can return to step 1 by pressing the ◄ key.
140 Chapter 14   Tell me about front panel menus ENWW
Tell me about front panel menus