HP DesignJet 8000sr User Manual

13 Tell me about waste management
Disposing of waste
It is the printer owner’s responsibility to ensure that waste is disposed of in accordance with all local, state
and federal regulations.
There are registered waste management companies t hat have been authorized by local authorities to
manage waste collection and disposal and that will  manage waste management and disposal on your
behalf.
We recommend that you contact your local authorities  for a list of authorized companies, or you can search
for...

There are normally two types of waste disposal services. The most suitable service will depend on your
waste volume production:
● Bottle by bottle and pick up on call : this may be th
e best option for low volume production to avoid
the overheads related to arranging and ensuring se cure temporary storage. You can order these
bottles (1) as needed from your local HP reseller.
● Storage in a suitable container (2) for solvents and regular pick up: this may be the best option for
high volume waste...

General recommendations
●The HP 780 Waste Ink Bottle is specifically designed 
to resist chemical interaction with waste ink. Do
not use any other kind of container  or bottle to collect the liquid. Consult your waste management
company to ensure you are following  correct and safe procedures.
● Do not dispose of materials via th
e sanitary sewer or drains. Hazardous waste disposal is regulated
by local, state and federal regulations.
● Store the full bottle in an area that has been prepar
ed for this...

164 Chapter 13   Tell me about waste management ENWW
Tell me about wastemana
gement
 

14 Tell me about… (menus)
This chapter outlines the user menu structure and operations.
● Menu operations
● The INK menu & messages
● The MEDIA menu
● The MEDIA REG menu
● Media advance calibration
● The PH. MAIN menu
● The PH. REC menu
● The FEED option
● The REWIND option
● The PRINTER menu
● The ADJUST menu
● The SETUP menu
● The HEATER menu
ENWW 165
Tell me about… (menus)
 

Menu operations
When the ONLINE key is pressed in the online idle mode, the printer enters offline mode. A menu group
appears on the front panel and menu operations are enabled.
SHIFT
SHIFT
Menu structure
The front panel menu has the following structure:
● Menu group — this menu is displayed at the fi
rst level. Some menus have several submenus.
● Second-level menus — these are submenus of the top menu group.
● Parameters — on selecting a menu item, you can select a value, command or enter a value....

3.To change the option setting displayed, press the  OK key.
4. Select a setting with the  and  keys.
Select  01 : FINE .
5.Press  OK key to confirm the parameter and return to step 2.
To define a value
The following example describes  the MEDIA ADV. VALUE in the ADJUST menu.
1. Select a menu with the arrow keys.
Select the  ADJUST menu with the 
 key.
2.Select a menu option with the  and  keys.
Select the  MEDIA ADV. VALUE  option. You can return to step 1 by pressing the 
 key.
3.Press the  OK key.
4....

5.Change the value using the  and  keys.
NOTE To see the full list of characters availabl e, refer to the list of characters below.
6.Press the  OK key to confirm the value and return to step 2.
Character list
Character code group
SHIFT 
, SHIFT 
Character
, 
Symbolsspace, !, “,#,$,%,&,,*,+,-,.,/,:,;,,?,@,[,],^,_,{,|,}
Numerals0 to 9
Upper-case lettersA to Z
Lower-case lettersa to z
Special characters  
168 Chapter 14   Tell me about… (menus) ENWW
Tell me about… (menus)
 

The INK menu & messages
This INK menu is used to display ink information or replace the ink. When the  key is pressed, information
on each ink cartridge is displayed at three-second intervals.
XX: Color name — K, Lm, Lc, Y, M, and C.
YYY: Amount of ink remaining.
ZZ/ZZ/ZZ: Manufacturing dat e of the ink cartridge
NOTEIf the following message is displayed, the ink cartridge is not a genuine HP Ink Cartridge.
Press the  SHIFT key to see information on the next color in k cartridge without waiting for...

To access the MEDIA menu:
1. Press the  ONLINE key.
2.Press the  key to see media information.
Media roll:
Cut sheet:
Nest:
XXXXXX: media type
YYY: media width
ZZZ: media length
Press the  CANCEL and 
 keys to display the main menu in offline state.
Press the  ONLINE key to take the printer online.
Press the  OK key to change media settings.
The MEDIA REG menu
Use the  MEDIA REG   menu to register or modify media type  parameters or create new media types in the
printer. See How do I…. Manage media...