HP DesignJet 510ps 1067 mm User Manual

Front panelThe printer’s front panel is a user-friendly interface that gives you access to a comprehensive set of printer 
functions. There is also information on your ink consumable items which is continually updated.• The front panel
 
• Menu structure 
• Navigating the menu system
 
• Message descriptions
 
 

The front panelThe panel on the front of your printer is the principal way of changing the behavior of the printer, apart from any 
software driven controls that may be provided through the application in use. The front panel of the printer 
contains the following functional areas:
Depending on your country and printer model, your front panel may include a localization label with text as shown 
above or symbols on the keys. The position of the keys is the same in all cases.
Display screen
Navigation...

Navigation keysThe display section of the front panel consists of an LCD display and the following five navigation keys, provided 
to navigate through the menus displayed on the screen:
• The Up   and   Down keys let you scroll through the various items in a menu list.
• The  Menu key takes you to the main screen. It  cancels any choices that have not yet been selected by 
pressing the  Enter key.
• The  Back key takes you to the previous screen.
• The  Enter key selects the item in the menu list and...

Display screenThe display screen of the front panel shows the main menu (the words displayed may vary). 
NOTE:You can always reach the main menu by pressing the Menu key.
After a short time-out, the display will always revert to the main menu with the  Job Management menu active.
The  Navigation example
 is given from the Job Management  menu.
Paper menu icon 
Ink menu icon
Job Management menu icon (active)
Setup menu icon
Active menuInformation 
message
Error 
message
 

Action keysThe Cancel  key cancels the current printer operation (printing or preparing for printing). It will also cancel the 
current menu selection and return to the main menu if a menu option is highlighted.
The  Form Feed and Cut  key causes a sheet to be ejected or the roll to be advanced and cut.
Cancel
Form Feed
and Cut key
 

Menu structureThe front panel display area screen shows the four classes of menu options available represented with specific 
icons. Click on the icon to display its menu structure.•  
Paper menu
 
•  Ink Menu
 
•  Job Management Menu
• Set-up menu
 
 

Paper menu
Pa p e r 
I n  ked a  r e a 
Aut 
o m a  ti c 
Si  z e 
Page F  orm a t 
ANS  I 
B es  t ANS  I A … E 
IS O 
B es  t IS  O …  A 0 
JI S 
B es  t J I S …  B 1 
ARC  H 
B es  t ARCH …  E 1 
Ov e rsi  z e 
O v e  r A 2 , O  v e  r A  1 
Ext  r a 
1  00c  m × 1  4 0c  m, … 
Rotat  e 
0 , 90 , 18  0 , 2  7 0 
Mir  r o  r in  g 
Shown only if paper is lo aded
Items alway s s h ow  n 
M e  nu i  te m de  p ends on th  e 
t y  pe of paper loaded
O n  /of f 
Small margins 
O n  /of f 
L o a  d/Unl  o a...

Ink menu
InkColor calibration
Information
PrintheadsInk Cartridges
TroubleshootingAlign PrintheadsReplace PrintheadsReplace Ink CartridgesColor settings
ColorGrayscaleTrue Black
Color/monochrome
Cyan PrintheadMagenta PrintheadBlack Printhead Yellow Printhead
StatusReset
Calibrate PaperStandard (4.5 min.)Special (11 min.)
Cyan Ink CartridgeInk LevelsMagenta Ink CartridgeYellow Ink Cartridge
Black Ink Cartridge
Drying time
AutomaticNoneManual
1, 2 …  , 99 min.NativesRGB
RGB...

Job Management menuThe HP-GL/2 Accessory Card provides a Reprint menu.