HP DesignJet 4000ps User Manual
Have a look at the manual HP DesignJet 4000ps User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 56
USB 2.0 socket
To check that the USB 2.0 socket has been correctly installed, go to the front panel and select the
icon, then I/O setup > USB > View information.
The front panel will reveal whether the socket is Installed or Not installed.
Please follow the appropriate instructions to connect the printer to your computer:
●
Connect directly to a computer (Windows)
●
Connect directly to a computer (Mac OS X)
●
Connect directly to a computer (Mac OS 9) [4000]
You can plug in your USB cable as illustrated...](http://img.usermanuals.tech/thumb/36/36806/w64_HP_DesignJet_4000ps-55.png "Page 56
USB 2.0 socket
To check that the USB 2.0 socket has been correctly installed, go to the front panel and select the
icon, then I/O setup > USB > View information.
The front panel will reveal whether the socket is Installed or Not installed.
Please follow the appropriate instructions to connect the printer to your computer:
●
Connect directly to a computer (Windows)
●
Connect directly to a computer (Mac OS X)
●
Connect directly to a computer (Mac OS 9) [4000]
You can plug in your USB cable as illustrated...")
![Page 58
The front panel will reveal whether the print server is Installed or Not installed.
Please follow the appropriate instructions to connect the printer to your network:
●
Connect to a network (Windows)
●
Connect to a network (Mac OS X)
●
Connect to a network (Mac OS 9) [4000]
You can plug in your network cable as illustrated below.
Memory expansion card
To check that the 256 MB memory expansion card has been correctly installed, go to the front panel
and select the
icon, then View printer information....](http://img.usermanuals.tech/thumb/36/36806/w64_HP_DesignJet_4000ps-57.png "Page 58
The front panel will reveal whether the print server is Installed or Not installed.
Please follow the appropriate instructions to connect the printer to your network:
●
Connect to a network (Windows)
●
Connect to a network (Mac OS X)
●
Connect to a network (Mac OS 9) [4000]
You can plug in your network cable as illustrated below.
Memory expansion card
To check that the 256 MB memory expansion card has been correctly installed, go to the front panel
and select the
icon, then View printer information....")
![Page 59
3 How do I... (printer assembly topics)
[4500]
NOTEThis chapter applies to the HP Designjet 4500 Printer series only.
●Get started
●
Unpack the printer
●
Assemble the stand
●
Attach the stand
●
Attach the roll module
●
Set up the printer
●
Connect and switch on the printer
●
Install the ink cartridges
●
Install the printheads
●
Install the printhead cleaners
●
Load roll 1
●
Load roll 2
●
Assemble the bin
ENWW45
How do I... (printer
assembly topics) [4500]](http://img.usermanuals.tech/thumb/36/36806/w64_HP_DesignJet_4000ps-58.png "Page 59
3 How do I... (printer assembly topics)
[4500]
NOTEThis chapter applies to the HP Designjet 4500 Printer series only.
●Get started
●
Unpack the printer
●
Assemble the stand
●
Attach the stand
●
Attach the roll module
●
Set up the printer
●
Connect and switch on the printer
●
Install the ink cartridges
●
Install the printheads
●
Install the printhead cleaners
●
Load roll 1
●
Load roll 2
●
Assemble the bin
ENWW45
How do I... (printer
assembly topics) [4500]")
![Page 61
Symbol on boxContents of box
Stand and bin assembly
Consumables box, including ...
Maintenance Kit (please keep this safe)
Spare box (used while attaching the stand to the printer)
Roll module
Scanner body (mfp only)
Scanner stand (mfp only)
Packing outside Europe:
Packing within Europe:
ENWWUnpack the printer 47
How do I... (printer
assembly topics) [4500]](http://img.usermanuals.tech/thumb/36/36806/w64_HP_DesignJet_4000ps-60.png "Page 61
Symbol on boxContents of box
Stand and bin assembly
Consumables box, including ...
Maintenance Kit (please keep this safe)
Spare box (used while attaching the stand to the printer)
Roll module
Scanner body (mfp only)
Scanner stand (mfp only)
Packing outside Europe:
Packing within Europe:
ENWWUnpack the printer 47
How do I... (printer
assembly topics) [4500]")
![Page 62
4.Remove the two lids. Place the consumables and spare boxes in front of the printer body.
Lower the stand and bin box onto the consumables and spare boxes. Then lower it onto the floor.
5.Lower the roll module box onto the consumables and spare boxes. Lower the roll module box
onto the floor. Then remove the consumables and spare boxes.
6.Remove all eight plastic handles from both sides of the box.
7.Remove the main printer box.
48 Chapter 3 How do I... (printer assembly topics) [4500] ENWW
How do...](http://img.usermanuals.tech/thumb/36/36806/w64_HP_DesignJet_4000ps-61.png "Page 62
4.Remove the two lids. Place the consumables and spare boxes in front of the printer body.
Lower the stand and bin box onto the consumables and spare boxes. Then lower it onto the floor.
5.Lower the roll module box onto the consumables and spare boxes. Lower the roll module box
onto the floor. Then remove the consumables and spare boxes.
6.Remove all eight plastic handles from both sides of the box.
7.Remove the main printer box.
48 Chapter 3 How do I... (printer assembly topics) [4500] ENWW
How do...")
![Page 63
8.Remove the two packing pieces.
Assemble the stand
1.Remove the first tray containing the parts for the bin.
2.Remove the second tray from the stand and bin assembly box. This tray contains the stand legs.
3.From the tray, remove the two boxes marked with L and R. Place them on the floor as shown.
ENWWAssemble the stand 49
How do I... (printer
assembly topics) [4500]](http://img.usermanuals.tech/thumb/36/36806/w64_HP_DesignJet_4000ps-62.png "Page 63
8.Remove the two packing pieces.
Assemble the stand
1.Remove the first tray containing the parts for the bin.
2.Remove the second tray from the stand and bin assembly box. This tray contains the stand legs.
3.From the tray, remove the two boxes marked with L and R. Place them on the floor as shown.
ENWWAssemble the stand 49
How do I... (printer
assembly topics) [4500]")
![Page 64
4.Lower the cross-brace onto the L and R boxes.
5.You now need to identify which is the left and right side of the cross-brace. On the left side (1)
you will see two holes, as shown; on the right side (2) you will see one hole.
6.You will need the bag of screws and the screwdriver provided. You may notice that the
screwdriver is slightly magnetic.
7.Identify the left leg (A) as shown below. Remove the two leg covers from the left leg.
50 Chapter 3 How do I... (printer assembly topics) [4500] ENWW
How...](http://img.usermanuals.tech/thumb/36/36806/w64_HP_DesignJet_4000ps-63.png "Page 64
4.Lower the cross-brace onto the L and R boxes.
5.You now need to identify which is the left and right side of the cross-brace. On the left side (1)
you will see two holes, as shown; on the right side (2) you will see one hole.
6.You will need the bag of screws and the screwdriver provided. You may notice that the
screwdriver is slightly magnetic.
7.Identify the left leg (A) as shown below. Remove the two leg covers from the left leg.
50 Chapter 3 How do I... (printer assembly topics) [4500] ENWW
How...")
![Page 66
13.Fix the right leg to the cross-brace using two screws on the outer side of the leg.
14.Fix the stand cross-bar using four screws.
15.Position a foot on the left leg. There are pins to help you to position the foot correctly.
WARNING!Do not remove the anti-slip material from the wheel.
16.Fix the left foot using four screws.
52 Chapter 3 How do I... (printer assembly topics) [4500] ENWW
How do I... (printer
assembly topics) [4500]](http://img.usermanuals.tech/thumb/36/36806/w64_HP_DesignJet_4000ps-65.png "Page 66
13.Fix the right leg to the cross-brace using two screws on the outer side of the leg.
14.Fix the stand cross-bar using four screws.
15.Position a foot on the left leg. There are pins to help you to position the foot correctly.
WARNING!Do not remove the anti-slip material from the wheel.
16.Fix the left foot using four screws.
52 Chapter 3 How do I... (printer assembly topics) [4500] ENWW
How do I... (printer
assembly topics) [4500]")
Symbol on boxContents of box Stand and bin assembly Consumables box, including ... Maintenance Kit (please keep this safe) Spare box (used while attaching the stand to the printer) Roll module Scanner body (mfp only) Scanner stand (mfp only) Packing outside Europe: Packing within Europe: ENWWUnpack the printer 47 How do I... (printer assembly topics) [4500]
4.Remove the two lids. Place the consumables and spare boxes in front of the printer body. Lower the stand and bin box onto the consumables and spare boxes. Then lower it onto the floor. 5.Lower the roll module box onto the consumables and spare boxes. Lower the roll module box onto the floor. Then remove the consumables and spare boxes. 6.Remove all eight plastic handles from both sides of the box. 7.Remove the main printer box. 48 Chapter 3 How do I... (printer assembly topics) [4500] ENWW How do I... (printer assembly topics) [4500]
8.Remove the two packing pieces. Assemble the stand 1.Remove the first tray containing the parts for the bin. 2.Remove the second tray from the stand and bin assembly box. This tray contains the stand legs. 3.From the tray, remove the two boxes marked with L and R. Place them on the floor as shown. ENWWAssemble the stand 49 How do I... (printer assembly topics) [4500]
4.Lower the cross-brace onto the L and R boxes. 5.You now need to identify which is the left and right side of the cross-brace. On the left side (1) you will see two holes, as shown; on the right side (2) you will see one hole. 6.You will need the bag of screws and the screwdriver provided. You may notice that the screwdriver is slightly magnetic. 7.Identify the left leg (A) as shown below. Remove the two leg covers from the left leg. 50 Chapter 3 How do I... (printer assembly topics) [4500] ENWW How do I... (printer assembly topics) [4500]
8.Lower the left leg onto the left side of the cross-brace. The left leg will fit only on the left side of the cross-brace. 9.Fix the left leg to the cross-brace using four screws on the inner side of the leg. 10.Fix the left leg to the cross-brace using two screws on the outer side of the leg. 11.Lower the right leg onto the right side of the cross-brace. The right leg will fit only on the right side of the cross-brace. 12.Fix the right leg to the cross-brace using four screws on the inner side of the leg. ENWWAssemble the stand 51 How do I... (printer assembly topics) [4500]
13.Fix the right leg to the cross-brace using two screws on the outer side of the leg. 14.Fix the stand cross-bar using four screws. 15.Position a foot on the left leg. There are pins to help you to position the foot correctly. WARNING!Do not remove the anti-slip material from the wheel. 16.Fix the left foot using four screws. 52 Chapter 3 How do I... (printer assembly topics) [4500] ENWW How do I... (printer assembly topics) [4500]
17.Position a foot on the right leg. There are pins to help you to position the foot correctly. WARNING!Do not remove the anti-slip material from the wheel. 18.Fix the right foot using four screws. 19.Turn the stand assembly into an upright position as shown. 20.Open the box containing the roll module. Remove the plastic box containing the screws. ENWWAssemble the stand 53 How do I... (printer assembly topics) [4500]
21.Please take note of the colored plugs located on the legs. 22.Remove the blue plug on the left leg. 23.Locate the pin into the left leg. 24.Remove the blue plug on the right leg. 54 Chapter 3 How do I... (printer assembly topics) [4500] ENWW How do I... (printer assembly topics) [4500]
25.Locate the pin into the right leg. 26.Remove the top yellow plug on the left leg. 27.Locate the pin into the interior of the left leg. 28.Remove the top yellow plug on the right leg. ENWWAssemble the stand 55 How do I... (printer assembly topics) [4500]
29.Locate the pin into the interior of the right leg. Attach the stand 1.Identify the left and right of the printer. This information is shown on the foam end packs. Also identify the rear of the printer. 2.Pull open the protective plastic from the base of the printer. Please ensure there is a three- meter space clear of obstructions to the rear of the printer and one meter at the front of the printer. Remove the two desiccant bags from the printer. 3.Using the screwdriver supplied, remove the two screws that hold drawer 1 in place. 56 Chapter 3 How do I... (printer assembly topics) [4500] ENWW How do I... (printer assembly topics) [4500]