HP Compaq Presario W19q User Guide

 
  
Back to Contents Page 
Wall Mounting Arm 
Preparing to Install An Optional Wall Mounting Arm (Not supplied)Installing a Wall Mounting Arm  
 
Preparing to Install a Wall Mounting Arm (Not supplied) 
 
This monitor can be attached to a wall mounting arm that you purchase separately. 
 
 CAUTION: Before disassembling the monitor, turn off the monitor power, and 
disconnect all power, video, and audio cables.  
1 Disconnect the cables from the monitor. 
2 With the panel face-down on a protected...

 
  
Back to Contents Page 
Using the Monitor 
 
Operating InstructionsExternal Controls LED Indicators
Settings
Setting the Optimal ResolutionAdjusting the VolumeUsing Headphones
Locking the OSD 
Adjusting OSD SettingsOSD Menu  
 
Operating Instructions 
Control buttons are located on the front of the panel, as shown below. Use the MENU button to adjust the display 
settings to your personal preferences: 
• Set up the monitor, attach the cables, and adjust the tilt as described in the Setup section...

 
 
External Controls 
 
A AUTO-configuration / Exit 
B Volume decrease / Left navigation 
C Power 
D  Volume increase / Right navigation 
E MENU / Enter 
F Headphone jack 
LED Indicators 
Status LED Color 
Full Power Mode   Green  
Active-off Mode   Orange   
See Technical Support FAQs for more information. 
 

 
  
Back to Contents Page 
Settings 
Setting the Optimal ResolutionAdjusting the VolumeUsing Headphones
Locking the OSD 
Adjusting OSD SettingsOSD Menu 
 
Setting the Optimal Resolution 
The recommended resolution for this monitor is 1440 by 900. To configure the monitor to this resolution, 
complete the setup procedure and make sure that the monitor is connected to the computer. Turn the monitor on 
and do the following:  
1 Click Start. 
2 Click Settings. 
3 Click Control Panel. 
4 Double-click...

 
 
Adjusting OSD Settings 
1 Press the MENU button to activate the OSD menu. 
2 Press 
 or  to navigate through the functions. Once the desired function is highlighted, press the MENU 
button again to activate it. If the selected function has a sub-menu, it will be displayed. Press 
 or  again 
to navigate through the sub-menu functions. Once the desired sub-function is highlighted, press the MENU 
button to activate it. 
3 Press 
 or  to change the settings of the selected function. 
4 To exit and...

 
 
Main Menu Item Main Menu 
Icon Sub-Menu Item Sub-Menu 
Icon Description 
H. Position 
 
Adjust the horizontal position of the 
picture Image Position 
 
V.  P o s i t i o n  
 
Adjust the vertical position of the picture 
Warm  N/A  Recall warm color temperature from 
EEPROM 
Cool  N/A  Recall cool color temperature from 
EEPROM 
sRGB  N/A  Recall sRGB temperature from EEPROM 
User / Red 
 
Red gain from digital-register 
User / Green 
 
Green gain from digital-register 
Color Temp. 
 
User / Blue...

 
  
Back to Contents Page 
Installing Drivers and Using the Auto-Adjustment Feature 
 
Downloading Drivers and Software 
To download the latest version of drivers and software files from the HP Support Web site:  
1 Refer to: http://www.hp.com/support
 
2 Select your country/region. 
3 Select Download Drivers and Software. 
4 Enter the model number of your monitor. The software download pages for your monitor will be displayed. 
5 Download and install the driver and software files using the instructions...

 
  
Back to Contents Page 
Technical Support FAQs 
 
 
Technical Support FAQs (Frequently Asked Questions) 
Problem & Question Possible Solutions 
Power LED is not on • Make sure the power button is on and the power cord is properly 
connected to a grounded power outlet and to the monitor. 
No Plug & Play • In order for the Plug & Play feature of the monitor to work, you 
need a Plug & Play compatible computer and video card. Check 
with your computer manufacturer.  
• Check the monitor’s video cable...

   
Problem & Question Possible Solutions 
Missing one of the primary colors (red, 
green, or blue) • Inspect the monitor’s video cable and make sure that none of the 
pins are bent. 
• Make sure the monitor’s video cable is properly connected to the 
computer. 
Screen image is not centered or sized 
properly • Adjust horizontal and vertical screen position. 
• For VGA input, the auto-adjustment function may fix this problem. 
Picture has color defects (white does 
not look white) • Adjust RGB color or...

 
  
Back to Contents Page 
Specifications 
GeneralLCD Panel (19)ResolutionPreset Display ModesPhysical CharacteristicsEnvironmental
Power Cord Set Requirements
Pin AssignmentsPlug and Play DDC2B Feature 
 
All specifications represent the typical specifications provided by HP’s component manufacturers; actual 
performance may vary either higher or lower. 
 
General 
Model number w19b /w19e / W19q  
LCD Panel (19) 
Driving system TFT Active Matrix Color LCD 
Size 481.4 mm (19) 
Video R, G, B Analog...