HP Color LaserJet Enterprise CP4025n User Manual

System setup menu
Use the SYSTEM SETUP menu to change product-configuration defaults such as sleep mode, product
personality (language), and jam recovery.
To display:  Press the Home button 
, select the  CONFIGURE DEVICE  menu, and then select the
SYSTEM SETUP  menu.
NOTE:Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
ItemSub-itemValuesDescription
DATE/TIMEDATE- - - - /[MMM]/[DD] YEAR =
[YYYY]/- - - /[DD] MONTH=
[YYYY]/[MMM]/- - DAY=Allows you to set...

ItemSub-itemValuesDescription
 USE REQUESTED TRAYEXCLUSIVELY*
FIRSTUSE REQUESTED TRAY handles
jobs that have specified a specific
input tray. Two options are
available:
● EXCLUSIVELY
: The product
never selects a different tray
when the user has indicated
that a specific tray should be
used, even if that tray is
empty.
● FIRST: The product can pull
from another tray if the
specified tray is empty, even
though the user specifically
indicated a tray for the job.
 MANUALLY FEED PROMPTALWAYS
*
UNLESS...

ItemSub-itemValuesDescription
 USE ANOTHER TRAYENABLED*
DISABLEDThis option turns on or off the
control-panel prompt to select
another tray when the specified
tray is empty.
 ALTERNATIVE
LETTERHEAD MODEON
OFF *When this option is  ON you can
load letterhead or preprinted paper
the same way for every job,
whether printing on one or both
sides of the page.
NOTE: This option is available
only for models that have
automatic duplexing.
 DUPLEX BLANK PAGESAUTO *
YESThis option controls how the
product handles...

ItemSub-itemValuesDescription
WAKE TIMEOFF*
CUSTOMSelect the  CUSTOM option to
configure the daily wake time for
the product to avoid warm-up or
calibration time. Select a day of the
week, set the wake time for that
day, and then choose whether the
wake time should be applied to all
days of the week.
OPTIMUM SPEED/ENERGY
USAGE FASTER FIRST PAGE *
SAVE ENERGY
SAVE MORE ENERGY
SAVE MOST ENERGYControls the fuser cool down
behavior.
FASTER FIRST PAGE : The fuser
maintains power and the first page
processes...

ItemSub-itemValuesDescription
AUTO CONTINUE OFF
ON*Determines product behavior
when the system generates an
Auto Continuable error.
● ON
: Allows the product to
continue printing.
● OFF
: Stops the product from
printing until the error is
cleared by the user.
JAM RECOVERY AUTO *
OFF
ONSets whether the product will
attempt to reprint pages after a
jam. If you select  AUTO, the
product reprints pages if enough
memory is available for full-speed
two-sided printing.
RAM DISK AUTO *
OFFSets how the RAM disk...

I/O menu
Items on the I/O (input/output) menu affect the communication between the product and the computer.
If the product contains an HP Jetdirect print server, you can configure basic networking parameters by
using this submenu. You can also configure these and other parameters through HP Web Jetadmin or
the embedded Web server.
For more information on these options, see 
Connect to a network on page 68.
To display: Press the  Home button 
, select the  CONFIGURE DEVICE  menu, and then select the  I/...

ItemSub-itemSub-itemSub-itemDescription
 IPV4 SETTINGSCONFIG METHODBOOTP
DHCP*
AUTO IP
MANUALSpecifies the method that TCP/IPv4
parameters will be configured on the
HP Jetdirect print server.
Use  BOOTP  (Bootstrap Protocol) for
automatic configuration from a BootP server.
Use  DHCP  (Dynamic Host Configuration
Protocol) for automatic configuration from a
DHCPv4 server. If selected and a DHCP
lease exists,  DHCP RELEASE  and DHCP
RENEW  menus are available to set DHCP
lease options.
Use  AUTO IP  for...

ItemSub-itemSub-itemSub-itemDescription
  DHCP RENEWNO*
YESThis menu appears if  CONFIG METHOD is
set to DHCP  and a DHCP lease for the print
server exists.
NO : The print server does not request to
renew the DHCP lease.
YES: The print server requests to renew the
current DHCP lease.
  PRIMARY DNS Specify the IP address (n.n.n.n) of a Primary
DNS Server.
  SECONDARY DNS Specify the IP address (n.n.n.n) of a
Secondary Domain Name System (DNS)
Server.
 IPV6 SETTINGSENABLEON
OFF *Use this item to enable or...

ItemSub-itemSub-itemSub-itemDescription
 PROXY SERVER  Specifies the proxy server to be used by
embedded applications in the product. A
proxy server is typically used by network
clients for Internet access. It caches Web
pages, and provides a degree of Internet
security, for those clients.
To specify a proxy server, enter its IPv4
address or fully-qualified domain name. The
name can be up to 255 octets.
For some networks, you might need to
contact your Internet Service Provider (ISP)
for the proxy server...

ItemSub-itemSub-itemSub-itemDescription
 IPSEC KEEP
DISABLE*Specify the IPSec status on the print server.
KEEP: IPSec status remains the same as
currently configured.
DISABLE : IPSec operation on the print
server is disabled.
 802.1X RESET
KEEP *Specify whether the 802.1X settings on the
print server are reset to the factory defaults.
RESET : The 802.1X settings are reset to the
factory defaults.
KEEP : The current 802.1X settings are
maintained.
 RESET SECURITY YES
NO *Specify whether the current...