HP Color LaserJet CP6015xh User Manual

ItemSub-itemValuesDescription
●DEFAULT
GATEWAY
●IDLE TIMEOUTSUBNET MASK: The subnet mask for the printer,
where m is a value from 0 to 255.
SYSLOG SERVER: The IP address of the syslog
server used to receive and log syslog messages.
DEFAULT GATEWAY: The IP address of the gateway
or router used for communications with other networks.
IDLE TIMEOUT: The time period, in seconds, after
which an idle TCP print data connection is closed
(default is 270 seconds, 0 disables the timeout).
  PRIMARY DNSSpecify the...

ItemSub-itemValuesDescription
 PROXY SERVER Specifies the proxy server to be used by embedded
applications in the product. A proxy server is typically
used by network clients for Internet access. It caches
Web pages, and provides a degree of Internet security,
for those clients.
To specify a proxy server, enter its IPv4 address or
fully-qualified domain name. The name can be up to
255 octets.
For some networks, you might need to contact your
Internet Service Provider (ISP) for the proxy server
address....

ItemSub-itemValuesDescription
 RESET SECURITYNO
YESSpecify whether the current security settings on the
print server will be saved or reset to factory defaults.
NO*: The current security settings are maintained.
YES: Security settings are reset to factory defaults.
DIAGNOSTICSEMBEDDED TESTSEXECUTEThis menu provides tests to help diagnose network
hardware or TCP/IP network connection problems.
Embedded tests help to identify whether a network fault
is internal or external to the product. Use an embedded...

ItemSub-itemValuesDescription
 PING TEST This test is used to check network communications.
This test sends link-level packets to a remote network
host, then waits for an appropriate response.
  DEST TYPESpecify whether the target device is an IPv4 or IPv6
node.
  DEST IPV4Type the IPv4 address.
  DEST IPV6Type the IPv6 address.
  PACKET SIZESpecify the size of each packet, in bytes, to be sent to
the remote host. The minimum is 64 (default) and the
maximum is 2048.
  TIMEOUTSpecify the length of time,...

ItemSub-itemValuesDescription
However, a refresh automatically occurs when the
menu times out or you manually return to the main
menu.
LINK SPEED AUTO
10T HALF: 10 Mbps, half-
duplex operation.
10T FULL: 10 Mbps, full-
duplex operation.
100TX HALF: 100 Mbps,
half-duplex operation.
100TX FULL: 100 Mbps,
full-duplex operation.
100TX AUTO: Limits
auto-negotiation to a
maximum link speed of
100 Mbps.
1000TX FULL: 1000
Mbps, full-duplex
operation.The link speed and communication mode of the print
server must...

Diagnostics menu
The DIAGNOSTICS menu allows you to run tests that can help you identify and solve problems with
the product.
To display: Press Menu and then select DIAGNOSTICS.
ItemSub-itemValuesDescription
PRINT EVENT LOG  Prints a report containing the last
50 entries in the product’s event
log, starting with the most recent.
SHOW EVENT LOG  Displays the last 50 events, starting
with the most recent.
PQ TROUBLESHOOTING  Prints a page that includes
instructions, pages for each color,
a demo page, and a...

ItemSub-itemValuesDescription
 COPIES1
10
50
100
500Determines how many pages
should be sent from the specified
source as part of the test.
FINISHING PAPER PATH
TEST  This item only appears if there is an
optional stapler/stacker or booklet
maker connected to the product.
Tests the paper-handling features
on the output accessory.
 STACKDESTINATION BIN
MEDIA SIZE
MEDIA TYPE
COPIES
DUPLEX
PRINT TEST PAGESets up the options for testing the
stapler/stacker or booklet maker
paper path.
After setting up all of...

ItemSub-itemValuesDescription
BLACK LASER SCANNER
CYAN LASER SCANNER
MAGENTA LASER SCANNER
YELLOW LASER SCANNER
FUSER MOTOR
FUSER PRESSURE RELEASE
MOTOR
BLACK ALIENATION MOTOR
CYAN ALIENATION MOTOR
MAGENTA ALIENATION MOTOR
YELLOW ALIENATION MOTOR
ITB CONTACT/ALIENATION
PAPER TRANSPORT MOTOR
TRAY 1 PICKUP SOLENOID
TRAY 2 PICKUP MOTOR
TRAY 2 PICKUP SOLENOID
TRAY 3 PICKUP MOTOR
TRAY 3 PICKUP SOLENOID
TRAY 4 PICKUP MOTOR
TRAY 4 PICKUP SOLENOID
TRAY 5 PICKUP MOTOR
TRAY 5 PICKUP SOLENOID
DUPLEXER REVERSE...

ItemSub-itemValuesDescription
 COPIESRange is 1 to 30. The default value
is 1.Allows the user to determine how
many copies of the internal page
are printed.
FINISHER TESTS  If the optional stapler/stacker or
booklet maker is installed, this
menu runs tests on specific
sensors and components. Different
values are displayed, based on the
accessory installed.
 MANUAL SENSOR TESTREAD ALL ONCE
CONTINUOUS READINGInitiates a diagnostic test of the
sensors on the stapler/stacker or
booklet maker.
 COMPONENT...

Service menu
The SERVICE menu is locked and requires a PIN for access. This menu is intended for use by authorized
service personnel.
46 Chapter 2   Control panelENWW