HP Color LaserJet CP6015xh User Manual

ItemSub-itemValuesDescription
●NORMAL is the default trapping setting.
Trapping is at a medium level and adaptive
halftoning is on.
●MAXIMUM is the most aggressive trapping
setting. Adaptive halftoning is on.
PROCESS CLEANING
PAGE    Allows you to create and process a cleaning page
for cleaning excess toner off the pressure roller in
the fuser. When the cleaning process runs, a blank
page is printed. This page can be discarded.
System setup menu
Use the SYSTEM SETUP menu to change product- configuration...

ItemSub-itemValuesDescription
RESTRICT COLOR USE ENABLE COLOR
COLOR IF ALLOWED
DISABLE COLORDisables or restricts color use. The
default is ENABLE COLOR. To
use the COLOR IF ALLOWED
setting, set up user permissions
through the embedded Web
server, HP Easy Printer Care, or
Web Jetadmin. See 
Supported
utilities for Windows on page 55.
COLOR/BLACK MIX AUTO
MOSTLY COLOR PAGES
MOSTLY BLACK PAGESThis menu item establishes how
the product switches from color to
monochrome (black and white)
mode for maximum...

ItemSub-itemValuesDescription
multipurpose tray instead. Two
options are available:
●ALWAYS: A prompt always
appears before using the
multipurpose tray. This is the
factory default setting.
●UNLESS LOADED: A
message appears only if the
multipurpose tray is empty.
 PS DEFER MEDIAENABLE
DISABLEDThis option affects how paper is
handled when printing from an
Adobe PS print driver.
●ENABLED uses HP’s paper
handling model.
●DISABLED uses the Adobe
PS paper handling model.
 SIZE/TYPE PROMPTDISPLAY
DO NOT...

ItemSub-itemValuesDescription
(duplexing). Two options are
available:
●AUTO enables Smart
Duplexing, which instructs
the device not to process both
sides if the second side is
blank. This can improve print
speed.
●YES disables Smart
Duplexing and forces the
duplexer to flip the sheet of
paper even if it is printed on
only one side. This might be
preferable for certain jobs that
use paper types such as
letterhead or prepunched
paper.
 IMAGE ROTATIONLEFT TO RIGHT
RIGHT TO LEFT
ALTERNATEThis option allows...

ItemSub-itemValuesDescription
PERSONALITY AUTO
PCL
PDF
PSSets the default personality to
automatic switching, PCL, PDF, or
PS modes. The default is AUTO.
CLEARABLE WARNINGS JOB
ONSets whether a warning is cleared
on the control panel or when
another job is sent. The default is
ON.
AUTO CONTINUE OFF
ONDetermines product behavior
when the system generates an
Auto Continuable error. The
default is ON.
REPLACE SUPPLIES STOP AT LOW
STOP AT OUT
OVERRIDE AT OUT 1
OVERRIDE AT OUT 2Sets product behavior when a...

ItemSub-itemValuesDescription
The Override options can be
enabled or disabled at any time,
and do not have to be re-enabled
for each cartridge. The product will
automatically continue printing
when a cartridge reaches
recommended replacement. The
message “Replace supply
Override in use” displays on the
control panel while a cartridge is
used in Override mode. When the
cartridge is replaced with a new
supply, Override is de-activated
until another cartridge reaches
recommended replacement.
OVERRIDE AT OUT...

To display: Press Menu, select CONFIGURE DEVICE, and then select OUTPUT SETUP.
ItemSub-itemValuesDescription
OUTPUT SETUP  This menu appears when the
HP 3-bin Stapler/Stacker
Accessory or the HP Booklet
Maker/Finisher Accessory is
attached.
MULTIFUNC FINISHER
or
MBM-3 BIN STAPLEROPERATION MODEMAILBOX
STACKERAllows you to set the default
operation mode. MAILBOX
assigns a user or group of users
to each output bin. STACKER
treats all of the output bins as a
single large bin. When one bin
gets full, jobs are...

ItemSub-itemValuesDescription
slows down to prevent jams,
never using the stapler buffer.
 FOLD LTR-R & A4 - R–4.0 mm
–3.5 mm
–3.0 mm
–2.5 mm
–2.0 mm
–1.5 mm
–1.0 mm
–0.5 mm
0.0 mm
0.5 mm
1.0 mm
1.5 mm
2.0 mm
2.5 mm
3.0 mm
3.5 mm
4.0 mmAdjusts the fold line for Letter and
A4 size paper (booklet maker
only).
 FOLD LEGAL & JISB4 –4.0 mm
–3.5 mm
–3.0 mm
–2.5 mm
–2.0 mm
–1.5 mm
–1.0 mm
–0.5 mm
0.0 mm
0.5 mm
1.0 mm
1.5 mm
2.0 mm
2.5 mm
3.0 mmAdjusts the fold line for Legal and
JIS B4 size paper (booklet...

ItemSub-itemValuesDescription
3.5 mm
4.0 mm
 FOLD 11X17 & A3 –4.0 mm
–3.5 mm
–3.0 mm
–2.5 mm
–2.0 mm
–1.5 mm
–1.0 mm
–0.5 mm
0.0 mm
0.5 mm
1.0 mm
1.5 mm
2.0 mm
2.5 mm
3.0 mm
3.5 mm
4.0 mmAdjusts the fold line for Legal and
11x17 and A3 size paper (booklet
maker only).
I/O menu
Items on the I/O (input/output) menu affect the communication between the product and the computer.
If the product contains an HP Jetdirect print server, you can configure basic networking parameters by
using this submenu. You can...

Table 2-1  Embedded Jetdirect and EIO  Jetdirect menus
ItemSub-itemValuesDescription
TCP/IPENABLEOFF
ONOFF: Disable the TCP/IP protocol.
ON*: Enable the TCP/IP protocol.
HOST NAME An alphanumeric string, up to 32 characters, used to
identify the product. This name is listed on the
HP Jetdirect configuration page. The default host name
is NPIxxxxxx, where xxxxxx is the last six digits of the
LAN hardware (MAC) address.
 IPV4 SETTINGSCONFIG METHOD
●BOOTP
●DHCP
●AUTO IP
●MANUALSpecifies the method that...