HP Color LaserJet CP6015x User Manual

							ItemSub-itemValuesDescription
●NORMAL is the default trapping setting.
Trapping is at a medium level and adaptive
halftoning is on.
●MAXIMUM is the most aggressive trapping
setting. Adaptive halftoning is on.
PROCESS CLEANING
PAGE    Allows you to create and process a cleaning page
for cleaning excess toner off the pressure roller in
the fuser. When the cleaning process runs, a blank
page is printed. This page can be discarded.
System setup menu
Use the SYSTEM SETUP menu to change product- configuration defaults such as sleep mode, product
personality (language), and jam recovery.
To display: Press Menu, select CONFIGURE DEVICE, and then select SYSTEM SETUP.
ItemSub-itemValuesDescription
DATE/TIMEDATE----/[MMM]/[YY] YEAR=
[YYYY]/---/[DD] MONTH=
[YYYY]/[MMM]/-- DAY=Allows you to set the correct date.
DATE FORMATYYYY/MMM/DD
MMM/DD/YYYY
DD/MMM/YYYYAllows you to choose the order in
which the year, month, and day
appear in the date.
TIME--:[MM] [PM] HOUR=
[HH]:-- [PM] MINUTE=
[HH]:[MM] -- AM/PM=Allows you to select from various
configurations for the TIME format.
Different wizards appear
depending on the TIME FORMAT
selected.
TIME FORMAT12 HOUR
24 HOURAllows you to select 12 HOUR or
24 HOUR format.
JOB STORAGE LIMIT Continuous value
Range: 1–100
Default = 32Allows you to specify the number
of Quick Copy jobs that can be
stored on the product. The default
value is 32. The maximum allowed
value is 100.
JOB HELD TIMEOUT OFF
4 HOURS
1 DAY
1 WEEKAllows you to set the amount of
time that Quick Copy jobs are kept
before being automatically deleted
from the queue. This menu item
only appears when a hard disk is
installed. The default value is
OFF.
SHOW ADDRESS AUTO
OFFThis item determines whether the
product’s IP address is shown on
the display with the READY
message. The default is OFF.
ENWWConfigure device menu 27
 
						

							ItemSub-itemValuesDescription
RESTRICT COLOR USE ENABLE COLOR
COLOR IF ALLOWED
DISABLE COLORDisables or restricts color use. The
default is ENABLE COLOR. To
use the COLOR IF ALLOWED
setting, set up user permissions
through the embedded Web
server, HP Easy Printer Care, or
Web Jetadmin. See 
Supported
utilities for Windows on page 55.
COLOR/BLACK MIX AUTO
MOSTLY COLOR PAGES
MOSTLY BLACK PAGESThis menu item establishes how
the product switches from color to
monochrome (black and white)
mode for maximum performance
and print cartridge life.
AUTO resets the product to the
factory default setting. The default
is AUTO.
Select MOSTLY COLOR PAGES
if nearly all of your print jobs are
color with high page coverage.
Select MOSTLY BLACK PAGES if
you print mostly monochrome print
jobs, or a combination of color and
monochrome print jobs.
TRAY BEHAVIOR  Use this menu to control how the
product handles paper trays and
related prompts at the control
panel.
 USE REQUESTED TRAYEXCLUSIVELY
FIRSTUSE REQUESTED TRAY handles
jobs that have specified a specific
input tray. Two options are
available:
●EXCLUSIVELY: The device
never selects a different tray
when the user has indicated
that a specific tray should be
used, even if that tray is
empty. This is the factory
default setting.
●FIRST: The device can pull
from another tray if the
specified tray is empty, even
though the user specifically
indicated a tray for the job.
 MANUALLY FEED PROMPT ALWAYS
UNLESS LOADEDThis option controls whether a
manual feed message should
appear when the type or size for a
job does not match the specified
tray and the device pulls from the
28 Chapter 2   Control panelENWW
 
						

							ItemSub-itemValuesDescription
multipurpose tray instead. Two
options are available:
●ALWAYS: A prompt always
appears before using the
multipurpose tray. This is the
factory default setting.
●UNLESS LOADED: A
message appears only if the
multipurpose tray is empty.
 PS DEFER MEDIAENABLE
DISABLEDThis option affects how paper is
handled when printing from an
Adobe PS print driver.
●ENABLED uses HP’s paper
handling model.
●DISABLED uses the Adobe
PS paper handling model.
 SIZE/TYPE PROMPTDISPLAY
DO NOT DISPLAYThis option controls whether the
tray configuration message
appears whenever a tray is closed.
Two options are available:
●DISPLAY: This option shows
the tray configuration
message when a tray is
closed. You can configure the
tray settings directly from this
message.
●DO NOT DISPLAY: This
option prevents the tray
configuration message from
automatically appearing.
 USE ANOTHER TRAYENABLE
DISABLEThis option turns on or off the
control-panel prompt to select
another tray when the specified
tray is empty. Two options are
available:
●ENABLE: When this option is
selected, the user is
prompted either to add paper
to the selected tray or to
choose a different tray. This is
the factory default setting.
●DISABLE: When this option
is selected, the user is not
given the option of selecting a
different tray. The device
prompts the user to add paper
to the tray that was initially
selected.
 DUPLEX BLANK PAGES AUTO
YESThis option controls how the device
handles two-sided jobs
ENWWConfigure device menu 29
 
						

							ItemSub-itemValuesDescription
(duplexing). Two options are
available:
●AUTO enables Smart
Duplexing, which instructs
the device not to process both
sides if the second side is
blank. This can improve print
speed.
●YES disables Smart
Duplexing and forces the
duplexer to flip the sheet of
paper even if it is printed on
only one side. This might be
preferable for certain jobs that
use paper types such as
letterhead or prepunched
paper.
 IMAGE ROTATIONLEFT TO RIGHT
RIGHT TO LEFT
ALTERNATEThis option allows an image from
an optional output accessory to be
rotated 180 degrees, so that
staples can be placed in the upper
corner (usually narrow format
devices).
SLEEP DELAY 1 MINUTE
15 MINUTES
30 MINUTES
45 MINUTES
60 MINUTES
90 MINUTES
2 HOURS
4 HOURSReduces power consumption
when the product has been
inactive for the selected period.
The default is 60 MINUTES.
WAKE TIMEOFF
CUSTOMAllows you to configure the daily
wake time for the product to avoid
warm-up or calibration time. Select
a day of the week and then select
CUSTOM. Set the wake time for
that day, and then choose whether
the wake time should be applied to
all days of the week.
OPTIMUM SPEED/ENERGY
USAGE FASTER FIRST PAGE
SAVE ENERGYSets the fuser cooling behavior. If
FASTER FIRST PAGE is selected,
the fuser does not cool before the
first page of new jobs print. If SAVE
ENERGY is selected, the fuser
cools before the first page prints.
DISPLAY BRIGHTNESS  Range is 1 through 10. Sets the brightness of the control
panel display. The default is 5.
30 Chapter 2   Control panelENWW
 
						

							ItemSub-itemValuesDescription
PERSONALITY AUTO
PCL
PDF
PSSets the default personality to
automatic switching, PCL, PDF, or
PS modes. The default is AUTO.
CLEARABLE WARNINGS JOB
ONSets whether a warning is cleared
on the control panel or when
another job is sent. The default is
ON.
AUTO CONTINUE OFF
ONDetermines product behavior
when the system generates an
Auto Continuable error. The
default is ON.
REPLACE SUPPLIES STOP AT LOW
STOP AT OUT
OVERRIDE AT OUT 1
OVERRIDE AT OUT 2Sets product behavior when a
cartridge is low. The default is
STOP AT LOW. This option allows
the product to continue printing
until a color supply is exhausted.
When the product is set to STOP
AT OUT, printing pauses until the
color supply is replaced.
The product displays an “Order
supplies” message when a
cartridge is running low and a
“Replace supplies” message when
a cartridge has been depleted. To
ensure optimal print quality, HP
recommends replacing a cartridge
when the “Replace supplies”
message is displayed. Replacing
the cartridge at this point can help
prevent waste of media or other
cartridges when one cartridge
produces poor print quality. The
Override options allow the product
to continue using a cartridge that
has reached the recommended
replacement point.
CAUTION:Using an Override
option may result in unsatisfactory
print quality and unavailability of
certain features (such as toner
remaining information).
CAUTION:All print defects or
supply failures incurred when an
HP supply is used in Override
mode are not considered defects in
materials or workmanship in the
supply under the HP Print
Cartridge Limited Warranty
Statement. For Warranty
information, see 
Print cartridge and
image drum limited warrantystatement on page 259.
ENWWConfigure device menu 31
 
						

							ItemSub-itemValuesDescription
The Override options can be
enabled or disabled at any time,
and do not have to be re-enabled
for each cartridge. The product will
automatically continue printing
when a cartridge reaches
recommended replacement. The
message “Replace supply
Override in use” displays on the
control panel while a cartridge is
used in Override mode. When the
cartridge is replaced with a new
supply, Override is de-activated
until another cartridge reaches
recommended replacement.
OVERRIDE AT OUT 1 allows
printing to continue when a color
supply is out, but displays a
warning. Printing stops if there is a
risk of damage to product
components.
OVERRIDE AT OUT 2 allows
printing to continue when the color
supply is out, but displays a
warning message. Printing is not
stopped even if there is a risk of
damage to product components.
SUPPLY INFORMATIONPAGES REMAINING
ORDER MESSAGES
LEVEL GAUGEON
OFF
ORDER AT RANGE=0-100%The user can set the supply
percentage remaining at which the
ORDER AT message appears.
The default is 5%.
COLOR SUPPLY OUT STOP
AUTOCONTINUE BLACKSets the COLOR SUPPLY OUT
product behavior when a color
supply is empty. When the product
is set to AUTOCONTINUE
BLACK , the product continues
printing with black toner only. The
default is STOP.
JAM RECOVERY AUTO
OFF
ONSets whether the product will
attempt to reprint pages after a
jam. The default is AUTO.
LANGUAGE  A listing of available languages
appears.Sets the default language. The
default language is ENGLISH.
Output Setup menu
This menu and associated sub-items displays only when an optional output accessory is attached to
the product.
32 Chapter 2   Control panelENWW
 
						

							To display: Press Menu, select CONFIGURE DEVICE, and then select OUTPUT SETUP.
ItemSub-itemValuesDescription
OUTPUT SETUP  This menu appears when the
HP 3-bin Stapler/Stacker
Accessory or the HP Booklet
Maker/Finisher Accessory is
attached.
MULTIFUNC FINISHER
or
MBM-3 BIN STAPLEROPERATION MODEMAILBOX
STACKERAllows you to set the default
operation mode. MAILBOX
assigns a user or group of users
to each output bin. STACKER
treats all of the output bins as a
single large bin. When one bin
gets full, jobs are automatically
routed to the next bin.
 STAPLESNONE
ONE LEFT ANGLED
ONE RIGHT ANGLED
TWO LEFT
TWO RIGHT
TWO TOPSets the default staple selection
for documents sent to the device
when no staple value is specified.
 STAPLES OUTSTOP
CONTINUESets the default behavior when a
job specifies stapling and the
stapler is out of staples. STOP
stops printing if the stapler runs
out of staples. CONTINUE allows
a job to continue printing even
when the device is out of staples.
 OFFSETOFF
ONTurns the job offset feature on or
off. When job offset is on, each
copy of a job is shifted to one side
in the output bin in order to keep
each copy separate from the
others.
 A4/LETTER STAPLE NORMAL
ALTERNATE 1
ALTERNATE 2Controls the speed of the print
engine to prevent paper jams by
using the stapler buffer.
With the NORMAL, the engine
speed is normal, and the stapler
buffer is used.
If the ALTERNATE 1 setting is
enabled, and the engine is in
Autosense Mode, the engine
slows down to prevent jams. If the
product is NOT in Autosense
Mode, the engine performs at
normal speed, using the stapler
buffer.
If the ALTERNATE 2 setting is
enabled, the engine always
ENWWConfigure device menu 33
 
						

							ItemSub-itemValuesDescription
slows down to prevent jams,
never using the stapler buffer.
 FOLD LTR-R & A4 - R–4.0 mm
–3.5 mm
–3.0 mm
–2.5 mm
–2.0 mm
–1.5 mm
–1.0 mm
–0.5 mm
0.0 mm
0.5 mm
1.0 mm
1.5 mm
2.0 mm
2.5 mm
3.0 mm
3.5 mm
4.0 mmAdjusts the fold line for Letter and
A4 size paper (booklet maker
only).
 FOLD LEGAL & JISB4 –4.0 mm
–3.5 mm
–3.0 mm
–2.5 mm
–2.0 mm
–1.5 mm
–1.0 mm
–0.5 mm
0.0 mm
0.5 mm
1.0 mm
1.5 mm
2.0 mm
2.5 mm
3.0 mmAdjusts the fold line for Legal and
JIS B4 size paper (booklet maker
only).
34 Chapter 2   Control panelENWW
 
						

							ItemSub-itemValuesDescription
3.5 mm
4.0 mm
 FOLD 11X17 & A3 –4.0 mm
–3.5 mm
–3.0 mm
–2.5 mm
–2.0 mm
–1.5 mm
–1.0 mm
–0.5 mm
0.0 mm
0.5 mm
1.0 mm
1.5 mm
2.0 mm
2.5 mm
3.0 mm
3.5 mm
4.0 mmAdjusts the fold line for Legal and
11x17 and A3 size paper (booklet
maker only).
I/O menu
Items on the I/O (input/output) menu affect the communication between the product and the computer.
If the product contains an HP Jetdirect print server, you can configure basic networking parameters by
using this submenu. You can also configure these and other parameters through HP Web Jetadmin or
the embedded Web server.
For more information on these options, see 
Configure network settings on page 76.
To display: Press Menu, select CONFIGURE DEVICE, and then select I/O.
ItemSub-itemValuesDescription
I/O TIMEOUT 15 SECONDS
Range: 5 - 300Allows you to set the product I/O
TIMEOUT in seconds.
Use this setting to adjust timeout
for the best performance. If data
from other ports appears in the
middle of your print job, increase
the timeout value.
EMBEDDED JETDIRECT MENUSee the next table for a list of options.
ENWWConfigure device menu 35
 
						

							Table 2-1  Embedded Jetdirect and EIO  Jetdirect menus
ItemSub-itemValuesDescription
TCP/IPENABLEOFF
ONOFF: Disable the TCP/IP protocol.
ON*: Enable the TCP/IP protocol.
HOST NAME An alphanumeric string, up to 32 characters, used to
identify the product. This name is listed on the
HP Jetdirect configuration page. The default host name
is NPIxxxxxx, where xxxxxx is the last six digits of the
LAN hardware (MAC) address.
 IPV4 SETTINGSCONFIG METHOD
●BOOTP
●DHCP
●AUTO IP
●MANUALSpecifies the method that TCP/IPv4 parameters will be
configured on the HP Jetdirect print server.
Use BootP (Bootstrap Protocol) for automatic
configuration from a BootP server.
Use DHCP (Dynamic Host Configuration Protocol) for
automatic configuration from a DHCPv4 server. If
selected and a DHCP lease exists, DHCP RELEASE
and DHCP RENEW menus are available to set DHCP
lease options.
Use Auto IP for automatic link-local IPv4 addressing.
An address in the form 169.254.x.x is assigned
automatically.
Use the MANUAL SETTINGS menu to configure TCP/
IPv4 parameters.
  DEFAULT IP
●AUTO IP
●LEGACYSpecify the IP address to default to when the print
server is unable to obtain an IP address from the
network during a forced TCP/IP reconfiguration (for
example, when manually configured to use BootP or
DHCP).
AUTO IP: A link-local IP address 169.254.x.x is set.
LEGACY: The address 192.0.0.192 is set, consistent
with older HP Jetdirect products.
  DHCP RELEASE
●NO
●YESThis menu appears if CONFIG METHOD was set to
DHCP and a DHCP lease for the print server exists.
NO*: The current DHCP lease is saved.
YES: The current DHCP lease and the leased IP
address are released.
  DHCP RENEW
●NO
●YESThis menu appears if CONFIG METHOD was set to
DHCP and a DHCP lease for the print server exists.
NO*: The print server does not request to renew the
DHCP lease.
YES: The print server requests to renew the current
DHCP lease.
  MANUAL SETTINGS
●IP ADDRESS
●SUBNET MASK
●SYSLOG SERVER(Available only if CONFIG METHOD is set to
MANUAL) Configure parameters directly from the
printer control panel:
IP ADDRESS: The unique IP address of the printer,
where n is a value from 0 to 255.
36 Chapter 2   Control panelENWW