HP Color LaserJet CP6015dn User Manual

ItemSub-itemValuesDescription
AUTO IP: A link-local IP address 169.254.x.x is set.
LEGACY : The address 192.0.0.192 is set, consistent
with older HP Jetdirect products.
  DHCP RELEASE
● NO
● YESThis menu appears if CONFIG METHOD
 was set to
DHCP  and a DHCP lease for the print server exists.
NO *: The current DHCP lease is saved.
YES: The current DHCP lease and the leased IP
address are released.
  DHCP RENEW
● NO
● YESThis menu appears if CONFIG METHOD
 was set to
DHCP  and a DHCP lease for the print...

ItemSub-itemValuesDescription
ADDRESS: Use this item to type a 32 hexadecimal
digit IPv6 node address that uses the colon
hexadecimal syntax.
  DHCPV6 POLICY
● ROUTER
SPECIFIED
● ROUTER
UNAVAILABLE
● ALWAYSROUTER SPECIFIED
: The stateful auto-configuration
method to be used by the print server is determined by
a router. The router specifies whether the print server
obtains its address, its conf iguration information, or
both from a DHCPv6 server.
ROUTER UNAVAILABLE : If a router is not available,
the...

ItemSub-itemValuesDescription
SECURITYPRINT SEC PAGEYES
NOYES: Prints a page that contains the current security
settings on the HP Jetdirect print server.
NO*: A security settings page is not printed.
 SECURE WEBHTTPS REQUIRED
HTTP/HTTPS
OPTIONALFor configuration management, specify whether the
embedded Web server will accept communications
using HTTPS (Secure HTTP) only, or both HTTP and
HTTPS.
HTTPS REQUIRED : For secure, encrypted
communications, only HTTPS access is accepted. The
print server will...

ItemSub-itemValuesDescription
Select YES to choose this test, or NO  to not choose it.
  DATA PATH TESTThis test helps to identify data path and corruption
problems on an HP postscript level 3 emulation
product. It sends a predefined PS file to the product,
However, the test is paperless; the file will not print.
Select YES to choose this test, or NO  to not choose it.
  SELECT ALL TESTSSelect this item to run all the embedded tests. Select
YES to run all tests, or select NO to not run all tests....

ItemSub-itemValuesDescription
  PACKETS RECEIVEDShows the number of packets (0 - 65535) received from
the remote host since the most recent test was initiated
or completed.
  PERCENT LOSTShows the percent of ping test packets that were sent
with no response from the remote host since the most
recent test was initiated or completed.
  RTT MINShows the minimum detected roundtrip- time (RTT),
from 0 to 4096 milliseconds, for packet transmission
and response.
  RTT MAXShows the maximum detected roundtrip-...

To display: Press Menu , select CONFIGURE DEVICE , and then select RESETS.
ItemValuesDescription
RESTORE FACTORY SETTINGS Allows you to clear the page buffer, remove
all perishable personality data, reset the
printing environment, and return all default
settings to factory defaults.
RESET CALIBRATION Resets calibration values on the formatter.
SLEEP MODE OFF
LOW
HIGH If 
SLEEP MODE  is OFF , the product will
never enter power save mode and no
asterisk will appear next to any item when
the user enters the...

Diagnostics menu
The DIAGNOSTICS menu allows you to run tests that can help you identify and solve problems with
the product.
To display:  Press Menu  and then select  DIAGNOSTICS.
ItemSub-itemValuesDescription
PRINT EVENT LOG  Prints a report containing the last
50 entries in the product’s event
log, starting with the most recent.
SHOW EVENT LOG  Displays the last 50 events, starting
with the most recent.
PQ TROUBLESHOOTING  Prints a page that includes
instructions, pages for each color,
a demo page,...

ItemSub-itemValuesDescription
 COPIES1
10
50
100
500Determines how many pages
should be sent from the specified
source as part of the test.
FINISHING PAPER PATH
TEST  This item only appears if there is an
optional stapler/stacker or booklet
maker connected to the product.
Tests the paper-handling features
on the output accessory.
 STACKDESTINATION BIN
MEDIA SIZE
MEDIA TYPE
COPIES
DUPLEX
PRINT TEST PAGESets up the options for testing the
stapler/stacker or booklet maker
paper path.
After setting up all of...

ItemSub-itemValuesDescription
BLACK LASER SCANNER
CYAN LASER SCANNER
MAGENTA LASER SCANNER
YELLOW LASER SCANNER
FUSER MOTOR
FUSER PRESSURE RELEASE
MOTOR
BLACK ALIENATION MOTOR
CYAN ALIENATION MOTOR
MAGENTA ALIENATION MOTOR
YELLOW ALIENATION MOTOR
ITB CONTACT/ALIENATION
PAPER TRANSPORT MOTOR
TRAY 1 PICKUP SOLENOID
TRAY 2 PICKUP MOTOR
TRAY 2 PICKUP SOLENOID
TRAY 3 PICKUP MOTOR
TRAY 3 PICKUP SOLENOID
TRAY 4 PICKUP MOTOR
TRAY 4 PICKUP SOLENOID
TRAY 5 PICKUP MOTOR
TRAY 5 PICKUP SOLENOID
DUPLEXER REVERSE...

ItemSub-itemValuesDescription
 COPIESRange is 1 to 30. The default value
is 1.Allows the user to determine how
many copies of the internal page
are printed.
FINISHER TESTS  If the optional stapler/stacker or
booklet maker is installed, this
menu runs tests on specific
sensors and components. Different
values are displayed, based on the
accessory installed.
 MANUAL SENSOR TESTREAD ALL ONCE
CONTINUOUS READINGInitiates a diagnostic test of the
sensors on the stapler/stacker or
booklet maker.
 COMPONENT...