HP Color LaserJet CP6015dn User Manual

Retrieve job menu
The RETRIEVE JOB  menu allows you to view li stings of all stored jobs.
To display:  Press Menu , and then select  RETRIEVE JOB.
ItemSub-itemOptionsDescription
USER   Each user who has stored jobs is
listed by name. Select the
appropriate user name to see a list of
stored jobs.
 ALL PRIVATE JOBS This message is displayed if a user
has stored jobs that require a PIN.
  Each job is listed by name.
  PRINTSelect this option to print a stored job.
When printing a private job, the user
is...

Information menu
Use the INFORMATION menu to access and print specific product information.
To display:  press Menu, and then select INFORMATION .
ItemDescription
PRINT MENU MAPPrints the control-panel menu map, which shows the layout and current
settings of the control-panel menu items.
PRINT CONFIGURATIONPrints the product configuration pages, which show the printer settings and
installed accessories.
PRINT SUPPLIES STATUS PAGEPrints the estimated remaining life for the supplies; reports statistics on...

Paper handling menu
Use this menu to configure input trays by size and type. It is important to correctly configure the trays
with this menu before you print for the first time.
To display:  Press Menu , and then select  PAPER HANDLING .
NOTE:If you have used other HP LaserJet product m odels, you might be accustomed to configuring
Tray 1 to  First mode or  Cassette mode. On HP Color LaserJet CP6015 Series printers, setting Tray 1
to  ANY SIZE  and ANY TYPE  is equivalent to  First mode. Setting Tray 1...

Configure device menu
The CONFIGURE DEVICE  menu allows you to change the default  printing settings, adjust the print
quality, change the system configuration and I/O options, and reset the default settings.
Printing menu
These settings affect only jobs without identified properties. Most jobs identify all of the properties and
override the values set from this menu.
To display:  Press Menu , select CONFIGURE DEVICE , and then select PRINTING.
Menu itemValuesDescription
COPIESRange: 1 - 32000Allows you...

ItemDescription
FORM LENGTHSets vertical spacing from 5 to 128 lines for default paper size.
ORIENTATIONAllows you to select default page orientation to portrait or landscape.
FONT SOURCESelects the font source.
FONT NUMBERThe product assigns a number to each font and lists the numbers on the PCL font
list. The range is 0 to 999.
FONT PITCHSelects the font pitch. This item might not appear, depending on the font selected.
The range is 0.44 to 99.99.
SYMBOL SETSelects any one of several available symbol...

Print Quality menu
To display: Press Menu , select CONFIGURE DEVICE , and then select PRINT QUALITY.
ItemSub-itemValuesDescription
ADJUST COLORHIGHLIGHTS
●CYAN DENSITY
● MAGNETA DENSITY
● YELLOW DENSITY
● BLACK DENSITYRange from 
+5 to –5.
Default is 0.Adjust the darkness or lightness of highlights on a
printed page. Lower values represent lighter
highlights on a printed page, and higher values
represent darker highlights on a printed page.
MIDTONES
● CYAN DENSITY
● MAGNETA DENSITY
● YELLOW DENSITY
●...

ItemSub-itemValuesDescription
AUTO SENSE MODETRAY 1 SENSINGFULL SENSING
EXPANDED SENSING
TRANSPARENCY
ONLYSets the sensing option for Tray 1 for paper types
using AUTO SENSE  mode.
When  FULL SENSING  is selected, the product
recognizes plain paper, heavy paper, glossy
paper, tough paper, and transparencies.
When  EXPANDED SENSING  is selected, the
product recognizes plain paper, heavy paper,
glossy paper, tough paper, and transparencies. It
senses the first page only other than
transparencies for which...

ItemSub-itemValuesDescription
 DISCHARGE MODENORMAL (default)
ONSelect  ON if you are seeing clumps of toner or
toner spatter on print jobs. These problems can
occur in low-temperature and low-humidity
environments, with lightweight or thin paper. The
problems might happen more frequently with
duplex jobs.
 PRINT MODESAUTO SENSE MODE
(default)
NORMAL
TRANSPARENCY
MODE
Allows you to change the print mode for non-HP
paper types, which can affect print quality.
When AUTO SENSE MODE  is enabled, the
product...

ItemSub-itemValuesDescription
especially when printing on lightweight paper or on
jobs with heavy toner coverage.
 MEDIA TEMPNORMAL (default)
REDUCEDSet this feature to  REDUCED if you are having
problems with paper sticking together in the output
bin.
 ENVIRONMENTOFF  (default)
ONOptimizes performance in extreme low-
temperature environments.
Set this feature to  ON if the product is operating in
a low-temperature environment and you are
having problems with print quality such as blisters
in the printed...

ItemSub-itemValuesDescription
CALIBRATE
NEUTRALSCALIBRATION SOURCETRAY 1 
TRAY 2 
TRAY  This menu item affects the toner mixture in order
to optimize neutral colors for color print jobs. A
special sensor measures color on three specially
printed pages from a selected tray and adjusts the
color parameters. This corrects for too much or too
little cyan, magenta, yellow, or black toner, which
improves color consistency.
Choose the source tray, paper type, and paper
size for the calibration page.
To run...