HP Color LaserJet CP3525n User Manual

CalloutArea on the screenInformation or capability that the area provides
When this setting is applied, the device turns off and then back on to disable the direct
port.
HP Jetdirect Security Configuration Wizard
Use the HP Jetdirect Security Configuration Wizard to HP Jetdirect print server management.
HP Web Jetadmin is a powerful web-based software utility for installing, configuring, and managing
network-connected devices. Since it can install and configure devices, it must be able to secure itself...

Edit Other Links
Use the Edit Other Links screen to add or customize up to five links to the Web sites of your choice
(see the following note). These links appear throughout the HP EWS screens in the Other Links box
beneath the left navigational bar. Four permanent links (hp instant support, Shop for Supplies,
Product Support, and Show Me How) have already been established. The following illustration, table,
and procedures describe how to use this screen.
NOTE:With a permanent storage device installed,...

Adding a link
Use this procedure to add a link.
1.Under Add Link, type the URL and the name of the link as you would like it to appear in the
HP EWS.
2.Click Add Link.
Removing a link
Use this procedure to remove a link.
1.Under User-defined Links, select the link or links that you would like to remove.
2.Click Remove Selected Link.
ENWWEdit Other Links 43
 

Device Information
Use the Device Information screen to provide a name of your choice for the device, assign an asset
number, and configure the company name, the person to contact about the device, and the physical
location of the device. The device name, device model, and serial number are also available on this
screen.
Figure 3-13  Device Information screen
NOTE:If you make any changes on the Device Information screen, click Apply to save the changes.
The information that is typed here appears on the...

Language
Use the Language screen to select the language in which the HP EWS screens appear. The following
illustration and table describe how to use this screen.
Figure 3-14  Language screen
1
2
3
4
CAUTION:Selecting View Pages in Device Language or Select a Language changes the language
for everyone who uses the HP EWS.
Table 3-9  Language
CalloutArea on the screenInformation or capability that the area provides
1HP EWS tabs and menusFor more information, see Navigating through the HP Embedded Web...

Date & Time
Use the Date & Time screen to update the product time. The following illustration and table describe
how to use this screen.
Figure 3-15  Date & Time screen
1
2
3
4
Table 3-10  Date & Time
CalloutArea on the screenInformation or capability that the area provides
1HP EWS tabs and menusFor more information, see Navigating through the HP Embedded Web Server
on page 4.
2Current Date and Current TimeShows the product date and time when the EWS was opened. If either is
incorrect, an IT...

Date & Time - Advanced
Use the Date & Time - Advanced screen to select the time zone (under Time Zone), Daylight Savings
time settings (under Daylight Savings Time Settings), and formats you prefer for displaying the date
(under Date Format) and time (under Time Format). The following illustration shows the Date & Time
- Advanced screen.
Figure 3-16  Date/Time Format screen
ENWWDate & Time 47
 

Date & Time - NTS Settings
Use the Date & Time - NTS Settings screen to synchronize the HP EWS with a network time server.
The following illustration shows the screen.
Figure 3-17  Date & Time - NTS Settings screen
To configure a network time server to correct the product clock drift, use the following procedure.
NOTE:This process keeps the clock from drifting (losing or gaining time), but does not synchronize
the clock with the network time server clock.
1.Type the TCP/IP address or host name of a...

Sleep Schedule
An IT administrator can use the Sleep Schedule screen to configure a wake time and a sleep time for
each day.. For example, the product can be set to wake up at 07:30, so the product has finished
initializing and calibrating and is ready to use by 08:00. The administrator sets only one wakeup setting
per day; however, each day can have a different wakeup setting. Additionally, to save energy, the sleep
delay can be set to turn the product off after a specific period of inactivity.
Figure...

Restrict Color
Use the Restrict Color screen to restrict color printing. You can restrict color printing for all users or for
specific users or specific applications. The following illustration and table describe how to use this
screen.
Figure 3-19  Restrict Color screen
1
2
3
4
5
6
7
8
Table 3-12  Restrict Color
CalloutArea on the screenInformation or capability that the area provides
1HP EWS tabs and menusFor more information, see Navigating through the HP Embedded Web Server
on page 4.
2Restrict Color...