HP Color LaserJet CM3530 MFP User Manual

Default Print Options
Administration > Default Job Options  > Default Print Options
Table 2-7  Default Print Options  menu
Menu itemSub-menu itemValuesDescription
Copies Per Job Type a value.Set the default number of copies for print jobs.
Default Paper Size (List of supported sizes)Select a paper size.
Default Custom Paper
SizeUnit of measureMillimeters
InchesConfigure the default paper size that is used when the
user selects Custom as the paper size for a print job.
X Dimension Configure the width...

Time/Scheduling menu
Administration > Time/Scheduling
Use this menu to set options for setting the time and for setting the product to enter and exit sleep mode.
NOTE: Values shown with (default) are the factory-default values. Some menu items have no default.
Table 2-8  Time/Scheduling  menu
Menu itemSub-menu itemSub-menu itemValuesDescription
Date/TimeDate Format YYYY/MMM/DD
(default)
MMM/DD/YYYY
DD/MMM/YYYYUse this feature to set the current date and
time, and to set the date format and time
format...

Menu itemSub-menu itemSub-menu itemValuesDescription
Wednesday
Thursday
Friday
Saturday
Sundayprepares the product for use so that users do
not have to wait for it to warm up. 
Sleep TimeMonday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday Off (default)
CustomUse this feature to set a sleep time for each
day of the week for periods when the product
will not likely be in use (for example, at a
certain time each evening). Setting a sleep
time makes the product automatically go into
a low-power mode....

Management menu
Administration > Management
Use this menu to set up global product-management options.
NOTE: Values shown with (default) are the factory-default values. Some menu items have no default.
Table 2-9  Management  menu
Menu itemSub-menu itemValuesDescription
Network Address ButtonDisplay
Hide (default) Use this feature to display the Network Address button
on the Home screen.
Stored Job ManagementQuick Copy Job Storage
LimitSelect the maximum
number of jobs to storeUse this menu to view and...

Menu itemSub-menu itemValuesDescription
  Override at out 1
Override at out 2Choose Override at out 1 to allow the product to
continue printing when supply items, other than the
toner collection unit, have reached the end of their
estimated life. Using this option will eventually result in
unacceptable print quality. Consider having a
replacement cartridge available for when the print
quality becomes unacceptable.
Choose  Override at out 2 to allow the product to
continue printing when any color supply...

Menu itemSub-menu itemValuesDescription
Select Auto to reset the product to the factory default
setting.
Select  Mostly color pages  if nearly all your print jobs
are color with high page coverage.
Select  Mostly black pages  if you print mostly
monochrome jobs or a combination of color and
monochrome jobs.
Table 2-9  Management menu (continued)
32 Chapter 2   Control panel ENWW
 

Initial Setup menu
Administration > Initial Setup
NOTE: Values shown with (default) are the factory-default values. Some menu items have no default.
Networking and I/O
Administration  > Initial Setup  > Networking and I/O
Table 2-10  Networking and I/O
Menu itemSub-menu itemValuesDescription
I/O Timeout Select a value in the
range. The factory default
setting is  15 seconds .I/O timeout refers to the elapsed time before a print job
fails. If the stream of data that the product receives for
a print job...

Menu itemSub-menu itemSub-menu itemValues and Description
Manual: Use the  Manual Settings  menu to configure
TCP/IPv4 parameters.
  Default IPSpecify the IP address to default to when the print
server is unable to obtain an IP address from the
network during a forced TCP/IP reconfiguration (for
example, when manually configured to use BootP or
DHCP).
Auto IP : A link-local IP address 169.254.x.x is set.
Legacy : The address 192.0.0.192 is set, consistent
with older HP Jetdirect products.
  DHCP...

Menu itemSub-menu itemSub-menu itemValues and Description
  AddressManual Settings: Use this item to manually set IPv6
addresses on the print server.
Enable: Select this item and choose  On to enable
manual configuration, or  Off to disable manual
configuration.
Address : Use this item to type a 32 hexadecimal digit
IPv6 node address that uses the colon hexadecimal
syntax.
  DHCPV6 PolicyRouter Specified : The stateful auto-configuration
method to be used by the print server is determined by
a router....

Menu itemSub-menu itemSub-menu itemValues and Description
AppleTalkEnable Off: Disable the AppleTalk protocol.
On  (default): Enable the AppleTalk protocol.
DLC/LLCEnable Off: Disable the DLC/LLC protocol.
On  (default): Enable the DLC/LLC protocol.
SecurityPrint Sec Page Yes  (default): Prints a page that contains the current
security settings on the HP Jetdirect print server.
No : A security settings page is not printed.
Secure Web For configuration management, specify whether the
embedded Web server...