HP Color LaserJet CM3530 MFP User Manual

Print weatherproof maps and outdoor signs
You can use the HP Color LaserJet CM3530 MFP Series to print durable, waterproof maps, signs, or
menus by using HP Tough Paper. HP Tough Paper is a waterproof, tear-proof, satin finish paper that
retains rich, vibrant print color and clarity even when exposed to heavy usage or weather. This avoids
the expensive and time-consuming laminating that is required with plain papers. To maximize the quality
of this output you must do the following:
●Choose the...

Set the duplex alignment
For duplexed documents such as brochures, set the registration for the tray before printing to ensure
the pages align.
1.From the control panel, touch the  Administration menu and then touch the Print Quality  menu.
2. Touch the Set Registration  setting and then touch the tray you are adjusting.
3. Touch the Test Page  option and then touch the  Print button.
4. Follow the steps on the page that prints.
118 Chapter 7   Use product features ENWW
 

Use the convenience stapler
Staple documents
Activate the stapling mechanism by inserting media into the convenience stapler.
1.Insert up to 20 sheets of paper that weigh up to 80 g/m
2 (20 lb) into the slot in the stapler door.
Insert fewer sheets to staple if the media weight is heavier than 80 g/m2 (20 lb).
CAUTION: Do not use the convenience stapler to staple plastic, cardboard, or wood. Damage
to the convenience stapler can result from attempting to staple these materials.
NOTE: Exceeding the...

3.Remove the stapled media from the slot.
NOTE: If you are unable to remove the media after stapling, carefully open the stapler door and
then slide your document out.
Load staples
Each staple cassette holds 1,500 unformed staples.
1. Open the stapler door.
NOTE: Opening the stapler door disables the stapler.
Instructions and replacement staples part numbers are listed on the stapler door.
2. If you are replacing a staple cassette (for example, if the staple cassette has run out of staples),
remove the...

3.Insert a new staple cassette into the opening inside the staple door.
4.Close the stapler door.
ENWW Use the convenience stapler 121
 

122 Chapter 7   Use product featuresENWW
 

8 Print tasks
●Cancel a print job
●
Use features in the Windows printer driver
ENWW 123
 

Cancel a print job
You can stop a print request by using the control panel or by using the software program. For instructions
about how to stop a print request from a computer on a network, see the online Help for the specific
network software.
NOTE:It can take some time for all printing to clear after you have canceled a print job.
Stop the current print job from the control panel
NOTE:If the print job is too far into the printing process, you might not have the option to cancel it.
1.
Press the stop...

Use features in the Windows printer driver
Open the printer driver
How do ISteps to perform
Open the printer driverOn the File menu in the software program, click  Print. Select
the printer, and then click  Properties or Preferences .
Get help for any printing option Click the ? symbol in the upper-right corner of the printer driver,
and then click any item in the printer driver. A pop-up message
displays that provides information about the item. Or, click
Help  to open the online Help.
Use printing...

How do ISteps to perform
Print covers on different paper
Print the first or last page on different papera) In the Special pages area, click Covers or Print pages on
different paper , and then click Settings. b) Select an option
to print a blank or preprinted front cover, back cover, or both.
Or, select an option to print the first or last page on different
paper. c) Select options from the  Paper source and Paper
type  drop-down lists, and then click  Add. d) Click  OK.
Adjust the resolution of printed...