HP Color LaserJet CM1015 User Manual

9Scan
NOTEThe HP Color LaserJet CM1015/CM1017 MFP does not support scanning slides or
photo negatives.
●Scan methods
●
Supported file types
●
Scan from the device control panel
●
Scan by using HP Solution Center (Windows)
●
Scan from the device and HP Director (Macintosh)
●
Scan using TWAIN-compliant and WIA-compliant software
ENWW77
 

Scan methods
There are several ways to scan a document.
●Scan from the device control panel: Start scanning directly using the control-panel scan buttons.
Press Scan To to scan to a folder (Windows only) or to scan to e-mail.
For more information, see 
Scan.
●Scan from HP Solution Center (Windows): From the workstation start the HP Solution Center
software. Pressing Start Scan to start the HP Solution Center software is not supported when the
device is connected to a network (direct-connect only.) It is...

Supported file types
HP scanning software supports these file types for scans initiated from the control panel:
●.bmp
●.gif
●.jpg
●.pdf
●.png
●.tif (compressed)
●.tif
In addition, HP Solution Center also supports these file types for scans initiated from the workstation:
●.rtf
●.fpx
●.htm
●.pcx
●.txt
ENWWSupported file types 79
 

Scan from the device control panel
Use the following instructions to scan directly from the device control panel.
NOTEThe computer connected to the device must be turned on.
Program the device Scan To button from the control panel
E-mail addresses and folders must be set up prior to using the Scan To button on the control panel.
Use HP Solutions Center to program the e-mail and folders for scanning.
Set up pre-configured destinations on the MFP
1.Open HP Solution Center and select Settings, Scan...

4.Select Save it to my computer and press Next. Type the e-mail address, subject, and note in the
text box and click Next.
5.Select the quality and click Next.
6.Type the e-mail address in the text box. Select the box for Send the new destination to the
MFP. Type a new name that appears on the MFP control panel and click Next.
Delete destinations
1.From the Set up the  list for the All-in-One, select one of the Available Destinations
on this PC and click Delete. The Delete Destination dialog box...

Scan by using HP Solution Center (Windows)
Use the HP Solution Center software program to scan a document or photo.
To view HP Solution Center
●Double-click the HP Solution Center icon on the Windows desktop.
OR
●On the Windows taskbar, click Start, Programs (or All Programs in Windows XP), HP, then
HP Solution Center.
For detailed instructions about scanning from HP Solution Center, see the HP Solution Center online
Help.
82 Chapter 9   ScanENWW
 

Scan from the device and HP Director (Macintosh)
The procedures described in this section are for Macintosh OS X V10.3 and V10.4.
For more information about tasks and settings described in this section, see the HP Director online Help.
Scanning tasks
To scan to a software program, scan an item using the program itself. Any TWAIN-compliant program
can scan an image. If the program is not TWAIN-compliant, save the scanned image to a file then place,
open, or import the file in the software program. For...

Scan using TWAIN-compliant and WIA-compliant
software
The MFP is TWAIN-compliant and Windows Imaging Acquisition (WIA)-compliant for Windows XP and
beyond. The MFP also supports TWAIN-compliant Macintosh applications.
Use TWAIN-compliant and WIA-compliant software
When in a TWAIN-enabled or WIA-enabled program, access the scanning feature and scan an image
directly into the open program. For more information, see the Help file or the documentation that came
with the TWAIN-compliant or WIA-compliant...

Scan a photo
1.Place the photo on the flatbed scanner with the picture-side down and the upper-left corner of the
photo in the lower-right corner of the glass.
2.Gently close the lid.
3. Scan the photo using one of the scanning methods. See 
Scan methods  for more information.
Scan edge-to-edge originals
For information about copying and scanning edge-to-edge originals, see 
Copy edge-to-edge originals .
Cancel a scan job
To cancel a scan job, use one of these procedures.
● On the control panel, press...

Scanning resolution is measured in pixels per inch (ppi). Color, grayscale, and black and white define
the number of colors possible. Adjust the scanner hardware resolution to up to 1200 ppi. The software
can perform an enhanced resolution up to 19,200 ppi. Also, set color and grayscale at 1 bit (black and
white), or at 8 bit (256 levels of gray) to 24 bit (true color).
The resolution and color guidelines table lists simple scanning tips.
NOTESetting the resolution and color to a high value can create...