HP Color LaserJet 4700dn User Manual

Setting color supply out response
1.Press  Menu to enter the  MENUS.
2. Press 
 to highlight CONFIGURE DEVICE.
3. Press 
 to select  CONFIGURE DEVICE .
4. Press 
 to highlight SYSTEM SETUP .
5. Press 
 to select  SYSTEM SETUP .
6. Press 
 to highlight COLOR SUPPLY OUT .
7. Press 
 to select  COLOR SUPPLY OUT .
8. Press 
 or  to select the appropriate setting.
9. Press 
 to set the selection.
10. Press  Menu.
Jam recovery
This option allows you to configure the printer response to paper jams, including...

RAM disk
This option allows you to specify how the RAM disk is configured. Options are AUTO and OFF . When
set to AUTO , the printer determines the optimal RAM size based on the amount of available memory.
The message displays only in printer models that do not have a hard disk installed. The default is  AUTO.
Changing RAM disk behavior
You can change this behavior at any time by following these steps:
1.Press  Menu to enter the  MENUS.
2. Press 
 to highlight CONFIGURE DEVICE .
3. Press 
 to select...

Selecting the language if the display is in a language you do not understand
1.Turn the printer power off.
2. Hold down the 
 key while turning the printer power on until all three lights stay on.
3. Press 
 again.
4. Press 
 or  to scroll through the available languages.
5. Press 
 to save the desired language as the new default.
ENWW Changing printer control panel configuration settings 77
 

Using the printer control panel in shared environments
Because your printer is shared with other users, adhere to the following guidelines to ensure successful
printer operation:
●Consult your system administrator before making changes to control panel settings. Changing
control panel settings could affect other print jobs.
● Coordinate with other users before changing the default printer font or downloading soft fonts.
Coordinating these operations conserves memory and avoids unexpected printer...

3 I/O configuration
This chapter describes how to configure certain network parameters on the printer. The following topics
are covered:
●
Network configuration
●
Parallel configuration
●
USB configuration
●
Auxiliary connection configuration
●
HP Jetdirect print servers
●
Wireless printing
ENWW 79
 

Network configuration
You might need to configure certain network parameters on the printer. You can configure these
parameters from installation software, the printer control panel, the embedded Web server, or
management software, such as HP Web Jetadmin or the HP LaserJet Utility for Macintosh.
NOTEFor more information about using the embedded Web server, see Using the embedded
Web server .
For more information about supported networks and network configuration tools, see the  HP Jetdirect
Print...

12.Press  to highlight MANUAL .
13. Press 
 to highlight IP ADDRESS .
14. Press 
 to select  IP ADDRESS .
NOTEThe first of three sets of numbers is highlighted. If a number is not highlighted, a
highlighted empty underscore appears.
15. Press  or  to increase or decrease the number for configuring the IP address.
16. Press 
 to move to the next set of numbers.
17. Repeat steps 15 and 16 until the correct IP address is entered.
18. Press the  Menu button to return to the  Ready state.
Setting the subnet...

Setting the default gateway
1.Press  Menu to enter the  MENUS.
2. Press 
 to highlight CONFIGURE DEVICE .
3. Press 
 to select  CONFIGURE DEVICE .
4. Press 
 to highlight I/O .
5. Press 
 to select  I/O.
6. Press 
 to highlight the  JETDIRECT menu.
7. Press 
 to select the  JETDIRECT menu.
8. Press 
 to highlight TCP/IP .
9. Press 
 to select  TCP/IP.
10. Press 
 to highlight MANUAL SETTINGS .
11. Press 
 to select  MANUAL SETTINGS .
12. Press 
 to highlight DEFAULT GATEWAY .
13. Press 
 to select...

Disabling IPX/SPX
NOTEDo not disable this protocol if Windows 95/98, Windows NT, Me, 2000, and XP users
will be printing to the printer using direct-mode IPX/SPX.
1. Press  Menu to enter the  MENUS.
2. Press 
 to highlight CONFIGURE DEVICE.
3. Press 
 to select  CONFIGURE DEVICE .
4. Press 
 to highlight I/O .
5. Press 
 to select  I/O.
6. Press 
 to highlight the  JETDIRECT menu.
7. Press 
 to select the  JETDIRECT menu.
8. Press 
 to highlight IPX/SPX .
9. Press 
 to select  IPX/SPX.
10. Press 
 to...

13.Press  to select  ON or OFF .
14. Press the  Menu button to return to the Ready  state.
Disabling AppleTalk
1.Press  Menu to enter the  MENUS.
2. Press 
 to highlight CONFIGURE DEVICE .
3. Press 
 to select  CONFIGURE DEVICE .
4. Press 
 to highlight I/O .
5. Press 
 to select  I/O.
6. Press 
 to highlight the  JETDIRECT menu.
7. Press 
 to select  JETDIRECT .
8. Press 
 to highlight APPLETALK .
9. Press 
 to select  APPLETALK .
10. Press 
 to highlight ENABLE .
11. Press 
 to select  ENABLE.
12....