HP Color LaserJet 2700n User Manual

Environmental product stewardship program
Protecting the environment
Hewlett-Packard Company is committed to providing quality products in an environmentally sound
manner. This product has been designed with several attributes to minimize impacts on our environment.
Ozone production
This product generates no appreciable ozone gas (O3).
Power consumption
Power usage drops significantly while in Sleep mode, which saves natural resources and saves money
without affecting the high performance of this...

More than 10 million HP LaserJet print cartridges were recycled globally in 2004 through the HP Planet
Partners supplies recycling program. This record number represents 26 million pounds of print cartridge
materials diverted from landfills. Worldwide, in 2004, HP recycled an average of 59% of the print
cartridge by weight consisting primarily of plastic and metals. Plastics and metals are used to make new
products such as HP products, plastic trays, and spools. The remaining materials are disposed of in...

For more information
To obtain information about these environmental topics:
●Product environmental profile sheet for this and many related HP products
●HP’s commitment to the environment
●HP’s environmental management system
●HP’s end-of-life product return and recycling program
●Material Safety Data Sheets
Visit 
www.hp.com/go/environment or www.hp.com/hpinfo/community/environment/productinfo/safety.
ENWW Environmental product stewardship program 153
 

Declaration of conformity
Declaration of Conformity
according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name:Hewlett-Packard Company
Manufacturers Address:11311 Chinden Boulevard,
Boise, Idaho 83714-1021, USA
declares, that the product
Product Name:HP Color LaserJet 2700 Series
Regulatory Model:
3)BOISB-0504-01
Product Options:All
Toner Cartridges:Q7560A, Q7561A, Q7562A, Q7563A
conforms to the following Product Specifications:
SAFETY: IEC 60950-1:2001 / EN60950-1: 2001 +A11
IEC 60825-1:1993 +A1+A2...

Safety statements
Laser safety
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration has
implemented regulations for laser products m anufactured since August 1, 1976. Compliance is
mandatory for products marketed in the United States.  The printer is certified as a “Class 1” laser product
under the U.S. Department of Health and Human  Services (DHHS) Radiation Performance Standard
according to the Radiation Control for Health and Safety Act of 1968. Since...

Laser statement for Finland
Luokan 1 laserlaite
Klass 1 Laser Apparat
HP Color LaserJet 2700, 2700n, laserkirjoitin on käyttäjän kannalta turvallinen luokan 1
laserlaite. Normaalissa käytössä kirjoittimen suojakotelointi estää lasersäteen pääsyn
laitteen ulkopuolelle. Laitteen turvallisuusluokka on määritetty standardin EN 60825-1 (1994)
mukaisesti.
VAROITUS !
Laitteen käyttäminen muulla kuin käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle näkymättömälle...

E Working with memory
Printer memory
The printer has one dual inline memory module (DIMM) slot. Use the DIMM slot to upgrade the printer
with the following items:
●More printer memory (DIMMs are available in 64, 128, and 256  MB).
●Other DIMM-based printer languages and printer options
NOTESingle in-line memory modules (SIMMs) used on previous HP LaserJet printers are not
compatible with the printer.
NOTETo order DIMMs, see Supplies and accessories.
You might want to add more memory to the printer if you...

Installing memory DIMMs
You can install more memory for the printer, and you can also install a font DIMM to allow the printer to
print characters for lan guages such as Chinese or  the Cyrillic alphabet.
CAUTIONStatic electricity can damage DIMMs. When handling DIMMs, either wear an
antistatic wrist strap, or freque ntly touch the surface of the DI MM antistatic package and then
touch bare metal on the printer.
To install memory and font DIMMs
1. Turn the printer off, and then disconnect all power and...

3.Place the formatter board on a clean, flat, grounded surface.
To replace a DIMM that is currently installed, sp read the latches apart on each side of the DIMM
slot, lift the DIMM up at an angle, and pull it out.
4. Remove the new DIMM from the antistatic package , and then locate the alignment notch on the
bottom edge of the DIMM.
5. Holding the DIMM by the edges, align the notch on  the DIMM with the bar in the DIMM slot at an
angle and firmly press the DIMM into the slot until  it is fully seated....

6.Push down on the DIMM until both latches engage the DIMM.
NOTE If you have difficulty inserting the DIMM, make sure that the notch on the bottom of
the DIMM is aligned with the bar in the slot. If the DIMM still does not go in, make sure that
you are using the correct DIMM type.
7. Align the edge of the formatter boar d in the tracks at the top and bottom of the slot, and then slide
the board back into the printer. Push the formatter firmly until you hear the formatter latches click
into place.
8....