HP Color LaserJet 2605dtn User Manual

RGB Color
The RGB Color  option determines how colors are rendered.
● Select  Default (sRGB)  for most printing needs. This setting instructs the printer to interpret
RGB color as sRGB, which is the accepted standard of Microsoft and the World Wide Web
Organization.
● Select 
AdobeRGB  for documents that use the AdobeRGB color space rather than sRGB. For
example, some digital cameras capture images in AdobeRGB, and documents that are
produced with Adobe PhotoShop use the AdobeRGB color space. When...

Network: How do I?
Use this section to answer network questions.
Set up the printer and use it on the network
Hewlett-Packard recommends that you use the HP software installer on the CD-ROMs that came
with the printer to set up printer drivers for the following network setups.
Set my network password
Use HP ToolboxFX to set a network password.
1.Open HP ToolboxFX and click  Device Settings.
2. Click the  Network Settings  tab.
NOTEIf a password has been set for the printer previously, you will be...

7.Press  (Left arrow ) or  (Right arrow ) to enter the first three digits of the IP address.
8. Press 
 (Select ) to save those digits and move to the next three digits of the IP address.
9. Press 
 (Left arrow ) or  (Right arrow ) to enter the next three digits of the IP address.
10. Press 
 (Select ) to save those digits and move to the next three digits of the IP address.
11. Press 
 (Left arrow ) or  (Right arrow ) to enter the next three digits of the IP address.
12. Press 
 (Select ) to save those...

Add memory: How do I?
Use this section to answer questions about adding memory.
Installing memory and font DIMMs
You can install more memory for the printer, and you can also install a font DIMM to print characters
for languages such as Chinese, or for the Cyrillic alphabet.
CAUTIONStatic electricity can damage DIMMs. When handling DIMMs, wear an antistatic
wrist strap, or frequently touch the surface of the DIMM antistatic package and then touch
bare metal on the printer.
1. Print a Configuration page...

4.Release the locks on each side of the DIMM slot.
5.Remove the DIMM from the antistatic package.
6.Holding the DIMM by the edges as shown in the illustration, align the notches on the DIMM with
the DIMM slot.
ENW W Add memory: How do I? 103
 

7.Firmly press the DIMM straight into the slot. Firmly close the locks on each side of the DIMM
until they snap into place.
8.Close the DIMM door.
9.Reconnect the power cable and turn the printer on.
10.Go to Checking DIMM installation .
104 Chapter 9   How do I? ENW W
 

Other: How do I?
Use this section to answer other questions about the printer.
Changing print cartridges
When a print cartridge approaches the end of useful life, the control panel displays a message
recommending that you order a replacement. The printer can continue to print using the current print
cartridge until the control panel displays a message instructing you to replace the cartridge.
The printer uses four colors and has a different print cartridge for each color: black (K), cyan (C),
magenta...

3.Remove the new print cartridge from the bag. Place the used print cartridge in the bag for
recycling.
4.Grasp both sides of the print cartridge by the blue handles and distribute the toner by gently
rocking the print cartridge from side to side.
CAUTION Do not touch the shutter or the surface of the roller.
5.Remove the shipping locks and the shipping tape  from the new print cartridge. Discard the
shipping tape and shipping locks according to local regulations.
106 Chapter 9   How do I? ENW W
 

6.Align the print cartridge with the tracks inside the printer, and using the handles, insert the print
cartridge until it is firmly seated.
7.Firmly close the front door.
After a short time, the control panel should display  Ready.
NOTE If a cartridge is in the wrong slot or is the wrong type for the printer, the control
panel will display one of the following messages:  Incorrect yellow, Incorrect magenta ,
Incorrect cyan , Incorrect black , or Incorrect supplies .
8.Installation is complete. Place...

108 Chapter 9   How do I?ENW W