HP Color LaserJet 2605dtn User Manual

To configure a direct-connected shared printer (client server
printing)
In this configuration, the printer is connected to a computer through a USB cable, the computer is
connected to the network, and the printer is shared with other computers on the network.
1.Insert the printer CD-ROM into your computer. If you have already set up your printer, click
Install Software  to start the software installer. If the software installer does not start, navigate to
the hpsetup.exe file on the CD-ROM and...

Managing the network
Viewing network settings
You can use the embedded Web server or HP ToolboxFX to view your IP configuration settings. For
more information, see 
HP ToolboxFX or Using the embedded Web server.
Changing network settings
You can use the embedded Web server or HP ToolboxFX to change your IP configuration settings.
For more information, see 
HP ToolboxFX  or Using the embedded Web server.
Set my network password
Use HP ToolboxFX to set a network password.
1.Open HP ToolboxFX and click...

Using the printer control panel
The HP Color LaserJet 2605 series allows you to set up an IP address automatically using BOOTP
or DHCP. For more information, see 
Default IP address configuration (AutoIP) .
Network configuration page
The Network configuration page lists the current settings and properties of the printer. To print the
Network configuration page from the printer, complete the following steps.
1.
On the control panel menu, press 
 (Select ).
2. Use the 
 (Left arrow ) or  (Right arrow )...

9.Press  (Left arrow ) or  (Right arrow ) to enter the next three digits of the IP address.
10. Press 
 (Select ) to save those digits and move to the next three digits of the IP address.
11. Press 
 (Left arrow ) or  (Right arrow ) to enter the next three digits of the IP address.
12. Press 
 (Select ) to save those digits and move to the next three digits of the IP address.
13. Press 
 (Left arrow ) or  (Right arrow ) to enter the next three digits of the IP address.
14. Press 
 (Select ).
15. The...

3.Use the  (Left arrow ) or  (Right arrow ) button to select  Link Speed, and then press 
(Select ).
4. Use the 
 (Left arrow ) or  (Right arrow ) button to select one of the following settings.
● 10T Full
● 10T Half
● 100T Full
● 100T Half
NOTE The setting must match with the network device to which you are connecting (a
network hub, switch, gateway, router, or computer).
5. Press  (Select ). The printer will power cycle.
ENWW Using the printer control panel 83
 

Supported network protocols
The HP Color LaserJet 2605 series supports the TCP/IP network protocol. It is the most widely used
and accepted networking protocol. Many networking services utilize this protocol. The following table
lists the networking services/protocols that are supported on the HP Color LaserJet 2605 series.
The following operating systems support network printing:
● Windows 98 SE
● Windows Me
● Windows 2000
● Windows XP
● Macintosh OS X v10.2 and later. For more information, see...

Table 8-4   IP addressing
Service nameDescription
DHCP (Dynamic Host Configuration Protocol)For Automatic IP address assignment. DHCP server
provides device with IP address. Generally requires no user
intervention for printer to obtain IP address from a DHCP
server.
BOOTP (Bootstrap Protocol)For Automatic IP address assignment. BOOTP server
provides device with IP address. Requires administrator to
input devices MAC hardware address on BOOTP server in
order for printer to obtain an IP address from that...

TCP/IP
This section is intended to provide information to help you gain a basic understanding of TCP/IP.
Similar to a common language that people use to communicate with each other, TCP/IP
(Transmission Control Protocol/Internet Protocol) is a suite of protocols designed to define the way
computers and other devices communicate with each other over a network.
TCP/IP is rapidly becoming the most used set of protocols. The main reason this is happening is the
fact that the Internet is based on TCP/IP. If...

IP address: network portion
Network addresses are managed by an organization in Norfolk, Virginia, recognized as InterNIC.
InterNIC has been contracted by the National Science Foundation to manage the Internet addresses
and domains. Network addresses are distributed to organizations that are in turn responsible for
making sure all attached devices or hosts on the network are properly numbered. For more
information on the network portion of an IP address, see 
Default IP address configuration (AutoIP)...

Configuring IP parameters
TCP/IP configuration parameters (such as IP address, subnet mask, default gateway) can be
configured on the printer in a variety of ways. These values can be configured manually (for
example, through Telnet, the embedded Web server, the arp and ping commands, and HP
management software), or they can be automatically downloaded using DHCP or BOOTP each time
the printer is turned on.
When powered on, a new printer that is unable to retrieve a valid IP address from the network...