HP Color LaserJet 2605dn User Manual

To check and order using HP Web Jetadmin
In HP Web Jetadmin, select the printer. The device status page shows supplies information. To
order, use the HP ToolboxFX. Or, see 
Accessories and ordering information.
Storing supplies
Follow these guidelines for storing print cartridges:
●Do not remove the print cartridge from its package until you are ready to use it.
CAUTION
To prevent damage, do not expose the print cartridge to light for more than a
few minutes.
● See Table C-4 Environmental specifications...

HP anti-counterfeit website
Visit the HP anti-counterfeit website at http://www.hp.com/go/anticounterfeit if the supplies status
gauges or HP ToolboxFX indicates that the print cartridge is not an HP print cartridge and you think
that it is genuine.
130 Chapter 11   Maintenance ENWW
 

Cleaning the printer
During the printing process, paper, toner and dust particles can accumulate inside the printer. Over
time, this buildup can cause print-quality problems such as toner specks or smearing. This printer
has a cleaning mode that can correct and prevent these types of problems.
To remove toner build-up
During the printing process, toner can accumulate inside the printer. Over time, this buildup can
cause print-quality problems. Each time you replace the black print cartridge, remove...

2.Locate the blue cleaning tool that is situated to the left above the black print cartridge.
3.Move the cleaning tool back and forth across the cartridge five times.
4.Ensure that the cleaning tool is returned to the left when the cleaning is finished.
5. Close the front door.
6. Run a cleaning page.
NOTE You will get toner on your hands when you perform this cleaning. To remove toner,
wash your hands with cool water.
132 Chapter 11   Maintenance ENWW
 

To clean the paper path using HP ToolboxFX
NOTEUse the following procedure to clean the paper path using the HP ToolboxFX. To
clean the engine when the computer is running an operating system that does not support
HP ToolboxFX, see the late-breaking Readme on the root of the CD-ROM, or visit
http://www.hp.com/support/clj2605 .
1.Make sure that the printer is turned  on and in the Ready state.
2. Open the HP ToolboxFX.
3. On the  Troubleshooting  tab, click Maintenance , click Cleaning Page  and then...

Cartridge out override
What is it?
The HP Color LaserJet 2605 series printers display an Order supplies message when a cartridge is
running low and a  Replace Supplies  message when a cartridge has been depleted.  To ensure
optimal print quality, HP recommends replacing a cartridge when the  Replace Supplies
message is displayed.  Replacing the cartridge at this point can help prevent waste of media or
other cartridges when one cartridge produces poor print quality.
The Cartridge Out Override feature...

Changing print cartridges
When a print cartridge approaches the end of useful life, the control panel displays a message
recommending that you order a replacement. The printer can continue to print using the current print
cartridge until the control panel displays a message instructing you to replace the cartridge.
The printer uses four colors and has a different print cartridge for each color: black (K), cyan (C),
magenta (M), and yellow (Y).
Replace a print cartridge when the printer control panel...

3.Remove the new print cartridge from the bag. Place the used print cartridge in the bag for
recycling.
4.Grasp both sides of the print cartridge by the blue handles and distribute the toner by gently
rocking the print cartridge from side to side.
CAUTION Do not touch the shutter or the surface of the roller.
5.Remove the shipping locks and the shipping tape  from the new print cartridge. Discard the
shipping tape and shipping locks according to local regulations.
136 Chapter 11   Maintenance ENWW
 

6.Align the print cartridge with the tracks inside the printer, and using the handles, insert the print
cartridge until it is firmly seated.
7.Firmly close the front door.
After a short time, the control panel should display  Ready.
NOTE If a cartridge is in the wrong slot or is the wrong type for the printer, the control
panel will display one of the following messages:  Incorrect yellow, Incorrect magenta ,
Incorrect cyan , Incorrect black , or Incorrect supplies .
8.Installation is complete. Place...

Calibrating the printer
The printer automatically calibrates at various times. You can adjust the calibration settings by using
the HP ToolboxFX.
Environmental differences or aging print cartridges might cause fluctuations in image density. The
printer accounts for this with image stabilization control. The printer automatically calibrates at
various times to maintain the highest level of print quality. You can also request a calibration by using
the HP ToolboxFX.
The printer does not interrupt a print...