HP Color LaserJet 2550L User Manual
Have a look at the manual HP Color LaserJet 2550L User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Environmental Product Stewardship program Protecting the environment Hewlett-Packard Company is committed to providing quality products in an environmentally sound manner. This product has been designed with several attributes to minimize impacts on our environment. Ozone production This product generates no appreciable ozone gas (O3). Energy consumption This product qualifies for ENERGY STAR®, which is a voluntary program established to encourage the development of energy-efficient office products. ENERGY STAR is a U.S. registered service mark of the U.S. Environmental Protection Agency. As an ENERGY STAR® partner, Hewlett-Packard Company has determined that this product meets ENERGY STAR® Guidelines for energy efficiency. For more information, seehttp://www.energystar.gov Paper use The manual duplex feature [two-sided printing; see Printing on both sides (duplexing manually) and N-up printing capability [multiple pages printed on one sheet; see Printing multiple pages on one sheet of paper (N-up printing) can reduce paper usage and the resulting demands on natural resources. Plastics Plastic parts over 25 grams are marked according to international standards that enhance the ability to identify plastics for recycling purposes at the end of the product’s life. HP LaserJet printing supplies In many countries/regions, this products printing supplies (for example, print cartridge, imaging drum) can be returned to HP through the HP Printing Supplies Returns and Recycling Program. An easy-to-use and free takeback program is available in over 48 countries/regions. Multi-lingual program information and instructions are included in every new HP LaserJet print cartridge and supplies package. HP Printing Supplies Returns and Recycling Program Information ENWW Environmental Product Stewardship program141
Since 1990, the HP Printing Supplies Returns and Recycling Program has collected millions of used HP LaserJet print cartridges that otherwise may have been discarded in the worlds landfills. The HP LaserJet print cartridges and supplies are collected and bulk shipped to our resource and recovery partners who disassemble the cartridge. After a thorough quality inspection, selected parts are reclaimed for use in new cartridges. Remaining materials are separated and converted into raw materials for use by other industries to make a variety of useful products. U.S. returns For a more environmentally responsible return of used cartridges and supplies, HP encourages the use of bulk returns. Simply bundle two or more cartridges together and use the single, pre-paid, pre-addressed UPS label that is supplied in the package. For more information in the U.S., call (1) (800) 340-2445 or visit the HP Printing Supplies Returns and Recycling Program website at: http://www.hp.com/go/recycle. Non-U.S. returns Non-U.S. customers should call the local HP Sales and Service Office or visit the http://www.hp.com/go/recycle website for further information regarding availability of the HP Printing Supplies Returns and Recycling Program. Paper This product is capable of using recycled papers, when the paper meets the guidelines outlined in the HP LaserJet Printer Family Print Media Guide. Go to http://www.hp.com/ support/ljpaperguide to download this guide in PDF format. This product is suitable for the use of recycled paper according to DIN 19309. Material restrictions This product does not contain added mercury. This product does not contain batteries. This HP product contains lead in solder that may require special handling at end-of-life. For recycling information, you can contact http://www.hp.com/go/recycle or contact your local authorities or the Electronics Industry Alliance:http://www.eiae.org. 142Appendix D Regulatory information ENWW
Material safety data sheet Material Safety Data Sheets (MSDS) can be obtained by contacting the HP LaserJet Supplies website at http://www.hp.com/hpinfo/community/environment/productinfo/safety.htm. Extended warranty HP SupportPack provides coverage for the HP hardware product and all HP supplied internal components. The hardware maintenance covers a three-year period from the date of the HP product purchase. The customer must purchase HP SupportPack within 90 days of the HP product purchase. For more information, contact the HP Customer Care Service and HP Customer Support Group. See HP customer care. Spare parts and supplies availability Spare parts and consumable supplies for this product will be available for at least five years after production has stopped. For more information On HP’s environmental programs, including: ●Product environmental profile sheet for this and many related HP products ●HP’s commitment to the environment ●HP’s environmental management system ●HP’s end-of-life product return and recycling program ●Material Safety Data Sheets See: http://www.hp.com/go/environment or http://www.hp.com/hpinfo/community/environment ENWWMaterial safety data sheet143
Declaration of conformity Declaration of Conformity according to ISO/IEC Guide 22 and EN 45014 Manufacturers Name:Hewlett-Packard Company Manufacturers Address:11311 Chinden Boulevard Boise, Idaho 83714-1021, USA declares, that the product Product Name:HP color LaserJet 2550L/2550Ln/2550n Regulatory Model Number 4):BOISB-0305-00. Including: Q3709A – Optional 250-sheet input tray; Q3710A – Optional 500-sheet input tray Product Options:ALL conforms to the following Product Specifications: Safety: IEC 60950:1999 / EN60950: 2000 IEC 60825-1:1993 +A1: 1997 +A2:2001 / EN 60825-1:1994 +A11:1996 +A2:2001 (Class 1 Laser/LED Product) GB4943-2001 EMC: CISPR 22:1997 / EN 55022:1998 Class B 1) 3) EN 61000-3-2:1995 / A14 EN 61000-3-3:1995/ A1 EN 55024:1998 FCC Title 47 CFR, Part 15 Class B 2) / ICES-003, Issue 3/ GB9254-1998, GB17625.1-1998 / CNS 13438 Supplementary Information: The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC, and carries the CE-Marking accordingly. 1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems. Compliance testing of product to standard with exception of Clause 9.5, which is not yet in effect. 2) This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 3) This product includes LAN (Local Area Network) options. When the interface cable is attached to LAN connectors, the product meets the requirements of EN55022 & CNS13438 Class A in which case the following applies: Warning — This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. 4) For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the product name or the product number(s). Boise, Idaho , USA 1 April, 2004 For regulatory topics only: Australia Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd., 31-41 Joseph Street Blackburn, Victoria 3130, Australia European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ-TRE / Standards Europe, Herrenberger Strasse 140 , D-71034, Böblingen (FAX: +49-7031-14-3143) USA Contact: Product Regulations Manager, Hewlett-Packard Company, PO Box 15, Mail Stop 160 Boise, Idaho 83707-0015, (Phone: 208-396-6000) 144Appendix D Regulatory information ENWW
Country-/region-specific safety statements Laser safety statement The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration has implemented regulations for laser products manufactured since August 1, 1976. Compliance is mandatory for products marketed in the United States. The printer is certified as a Class 1 laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. Since radiation emitted inside the printer is completely confined within protective housings and external covers, the laser beam cannot escape during any phase of normal user operation. WARNING! Using controls, making adjustments, or performing procedures other than those specified in this user guide may result in exposure to hazardous radiation. Canadian DOC statement Complies with Canadian EMC Class B requirements. «Conforme àla classe B des normes canadiennes de compatibilité électromagnétiques (CEM).» Korean EMI statement ENWW Country-/region-specific safety statements145
Finnish laser statement LASERTURVALLISUUS LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT HP color LaserJet 2550L, 2550Ln, 2550n -laserkirjoitin on käyttäjän kannalta turvallinen luokan 1 laserlaite. Normaalissa käytössä kirjoittimen suojakotelointi estää lasersäteen pääsyn laitteen ulkopuolelle. Laitteen turvallisuusluokka on määritetty standardin EN60825-1 (1994) mukaisesti. VAROITUS! Laitteen käyttäminen muulla kuin käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. VARNING! Om apparaten används på annat sätt än i bruksanvisning specificerats, kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1. HUOLTO HP color LaserJet 2550L, 2550Ln, 2550n -kirjoittimen sisällä ei ole käyttäjän huollettavissa olevia kohteita. Laitteen saa avata ja huoltaa ainoastaan sen huoltamiseen koulutettu henkilö. Tällaiseksi huoltotoimenpiteeksi ei katsota väriainekasetin vaihtamista, paperiradan puhdistusta tai muita käyttäjän käsikirjassa lueteltuja, käyttäjän tehtäväksi tarkoitettuja ylläpitotoimia, jotka voidaan suorittaa ilman erikoistyökaluja. VARO! Mikäli kirjoittimen suojakotelo avataan, olet alttiina näkymättömälle lasersäteilylle laitteen ollessa toiminnassa. Älä katso säteeseen. VARNING! Om laserprinterns skyddshölje öppnas då apparaten är i funktion, utsättas användaren för osynlig laserstrålning. Betrakta ej strålen. Tiedot laitteessa käytettävän laserdiodin säteilyominaisuuksista: Aallonpituus 770-800 nm Teho 5 mW Luokan 3B laser 146Appendix D Regulatory information ENWW
E Working with memory This section provides information about the following topics: ● Printer memory ● Installing memory and font DIMMs ● Checking DIMM installation ● Enabling memory ● Enabling the language-font DIMM ENWW147
Printer memory The HP color LaserJet 2550 series printer has one dual inline memory module (DIMM) slot for upgrading the printer capabilities with the following options: ●More printer memory. DIMMs are available in 32, 64, and 128 MB for a maximum of 160 MB. ●DIMM-based accessory fonts, macros, and patterns. You might want to add more memory to the printer if you often print complex graphics or PS documents, or use many downloaded fonts. Additional memory also allows the printer to print multiple, collated copies at the maximum speed. Before ordering additional memory, see how much is currently installed by printing a Configuration page. [Press (GO) and (CANCEL JOB) simultaneously, or use the HP Toolbox.] To order DIMMs, see Accessories and ordering information. Single inline memory modules (SIMMs) used on previous HP LaserJet printers are not compatible with the printer. 148Appendix E Working with memory ENWW
Installing memory and font DIMMs You can install more memory for the printer, and you can also install a font DIMM to print characters for languages such as Chinese, or for the Cyrillic alphabet. CAUTION Static electricity can damage DIMMs. When handling DIMMs, wear an antistatic wrist strap, or frequently touch the surface of the DIMM antistatic package and then touch bare metal on the printer. To install memory and font DIMMs 1. Print a Configuration page by pressing (GO) and (CANCEL JOB) simultaneously. (A Supplies Status page and possibly an HP Jetdirect Configuration page also print.) If the Configuration page does not print in your language, see Special pages. 2. After the Configuration page prints, turn the printer off and disconnect the power cable. 3. On the right side of the printer, open the DIMM door. 4. Open the second DIMM door. 5. Release the locks on each side of the DIMM slot. ENWW Installing memory and font DIMMs149
6. Remove the DIMM from the antistatic package. 7. Holding the DIMM by the edges as shown in the illustration, align the notches on the DIMM with the DIMM slot. 8. Firmly press the DIMM straight into the slot. Firmly close the locks on each side of the DIMM until they snap into place. 9. Close the two DIMM doors. 10. Reconnect the power cable and turn the printer on. 11. Go to Checking DIMM installation. 150Appendix E Working with memory ENWW