HP Ac300w User Manual

49 
 
3.  Put the camera with Li-ion battery in the waterp roof case 
and don’t close the case, then put them to the elec tronic 
dry cabinet for about two hours. Before you use the  
machine, close the waterproof case in the electroni c dry 
cabinet immediately. Don’t open the waterproof case  
again to avoid humidity. 
5.1.2  Changing the T Tip Adapter 
Depending on the accessories that you want to use w ith the case, 
the T tip adapter may be detached and attached to a nother housing 
back door or...

 
50 
5.1.3  Changing the Housing Back Door 
Depending on the accessories that you want to use with the case, 
you may need to change the housing back door. Two b ack doors are 
included in the standard package: the waterproof ho using back door, 
and the vented housing back door.  
Do the following to change the housing back door: 
1.  Open the back door completely. 
2.  Pull to detach the back  door from the case. 
3.  Detach the T tip adapter  from the current back  
door and install the T tip...

51 
5.3 Assembling the Camera Accessories 
Lock the T tip adapter to the T tip of the adjoining accessories to 
install them to your camera. 
 
  Tips on attaching adhesive mounts  ·  Apply to clean surfaces - wax, dust, and oily esse nce free. 
·   Attach the mount at room temperature. 
·   Mount only on smooth surfaces. To obtain optimum a dhesion, 
firmly press into place when installing the mount. 
·   It is highly recommended to attach the mount a min imum   
of 24 hours before its initial usage. 
·...

 
52 
5.4 RF Watch Remote Control 
Before using the RF watch remote control, you must pair it with the 
camera.    
Do the following to pair your RF watch remote contr ol. 
1.  On the camera, press the  Mode button repeatedly to 
change to  SET mode. 
2.  Press the  Shutter button to enter  SET mode. 
3.  Press the  Mode button to highlight  MORE. 
4.  Press the  Shutter button to enter the  MORE menu.   
5.  Press the  Mode button to highlight  BINDING. 
6.  Press the  Shutter button to enter the...

53 
9.  Use the LEFT or RIGHT  button to select  Pairing and 
press the  VIDEO button to enter  Pairing menu. 
10.  Use the  LEFT or RIGHT  button to select the preview 
window that you want to pair with your camera and p ress 
the  VIDEO  button to start pairing. 
 
11.  When pairing is complete, press the  SET button to return 
to  SET  mode. Then press the  SET button to switch to 
Preview  mode. 
12.  Press the  VIDEO button on your RF watch remote control 
to start and stop video recording. To take...

 
54 
Appendix 
Specifications 
General 
OLED Screen  
Display 0.83” 
Storage (Memory) Micro SD card, up to 32GB SDHC Class 6 
Image Quality  Optics: Ultra-sharp F/no=2.8, f=3.4mm
 
Focus range: 0.8m ~ infinity  
Field of view: Ultra wide, Wide 
Video    1080p (16:9): 60fps Ultra wide/30fps Ultra  wide, Wide, Narrow FOV  
960p (4:3): 60, 30 fps Ultra wide FOV 
720p (16:9): 120, 60 fps Ultra wide FOV 
WVGA (16:9): 240 fps Ultra wide FOV 
Time lapse: 1, 3, 5, 10, 30, 60 seconds 
Video format: H.264 mp4...

55 
General 
Capture (H.264) 
Average Record  
Time Video (1080p60): about 90 minutes, 
Photo (16MP): about 250 photos 
Auto Power Off  1, 3, 5, 10, 30, 60 minutes   
Inputs/Outputs  Micro USB, Mini HDMI, 2.5mm external
 
microphone 
Battery  1130mAh rechargeable Li-ion 
Dimensions  42.7 (H) x 59.2 (W) x 26.4 (D) mm   
(without lens) 
Weight Approx. 74±3g (without battery)  

 
56 
Troubleshooting 
Problem Possible Cause Solution 
The battery LED is  
flashing red. The battery is almost 
used up. 
Replace with a new  
battery or charge the  
battery. 
Nothing happens  
when the 
Shutter 
button is pressed.
 
The Micro SD card is full. You cannot take  
photos or record 
videos at this point.
 
Transfer the Micro SD  
card files to the  
computer or delete the 
files in the Micro SD  
card. 
Nothing happens  
when the  Shutter 
button is pressed.  
“000” appears on 
the...

   
              
Trademarks and licenses 
 
 
 
 
SDHC Logo is a trademark of SD-3C, L