HP Ac300w User Manual

29 
4.4 Shooting Interval 
This menu allows you to select the interval options when capturing 
photos using Lapse mode.  
Do the following to select the shooting interval. 
1.  Press the  Mode button repeatedly to change to  SET 
mode. 
2.  Press the  Shutter button to enter  SET mode. 
3.  Press the  Shutter button to enter the  SETUP menu.   
4.  Press the  Mode button to highlight  LAPSE. 
5.  Press the  Shutter button to enter the  LAPSE submenu. 
        
6.  Press the  Mode button repeatedly to...

 
30 
options: 1 SEC, 3 SEC , 5 SEC , 10 SEC ,   
30 SEC , and 60 SEC .   
 
8.  Press the  Shutter button to confirm.   
9.  To exit the menu, press the  Mode 
button repeatedly until the  EXIT screen 
appears. 
10.  Press the  Shutter button to exit  SET mode.   
 
        

31 
4.5 Up/Down 
This menu allows you to capture videos and photos upside down. 
You can enable this feature when you mount the came ra upside 
down so that the captured shots appear right side u p when you 
review it on your computer or TV.
  
Do the following to enable this feature. 
1.  Press the  Mode button repeatedly to change to  SET 
mode. 
2.  Press the  Shutter button to enter  SET mode. 
3.  Press the  Shutter button to enter the  SETUP menu.   
4.  Press the  Mode button to highlight...

 
32 
4.6 Loop 
This menu allows you to set the camera to continuously record the 
video until the memory card storage is full or the  recording is 
manually stopped.  
Do the following to enable this feature. 
1.  Press the  Mode button repeatedly to change to  SET 
mode. 
2.  Press the  Shutter button to enter  SET mode.   
3.  Press the  Shutter button to enter the  SETUP menu.   
4.  Press the  Mode button to highlight  LOOP. 
5.  Press the  Shutter button to enter the  LOOP submenu. 
        
6....

33 
Looping video mode 
·  The loop video function is only applicable when th e video 
resolution is set to 1080p30.   
·   Multiple small segments are written to the memory  card, 
and these segments will be overwritten during loop  
recording. 
·   Without any looping files, the system will indicat e that the 
card is full when the remaining storage is less tha n 
800MB. 
·   The looping video will perform when the remaining 
storage and saved looping files capacity are more t han 
800MB. 
·   When...

 
34 
Looping video mode with USB adapter 
·  When the camera is connected to a USB adapter, the  
video recording starts automatically. When the USB  
adapter is disconnected, the recording will stop re cording 
after 30 seconds. Then it will automatically save t he file 
and turn the device off. 
·   When the camera is connected to a USB adapter, the  
video recording starts automatically.    
If you manually stop the recording:   
  the camera will automatically power off after bein g 
idle for 10...

35 
4.7 Delete 
This menu allows you to delete all files in the Micro SD card. 
Do the following to delete all files. 
1.  Press the  Mode button repeatedly to change to  SET 
mode. 
2.  Press the  Shutter button to enter  SET mode. 
3.  Press the  Shutter button to enter the  SETUP menu.   
4.  Press the  Mode button to highlight  DELETE. 
5.  Press the  Shutter button to enter the  DELETE submenu. 
        
6.  Press the  Mode button repeatedly to scroll through the 
delete options. 
 
To delete the...

 
36 
8.  Press the Mode button to select  √ to confirm deletion. 
 
9.  Press the  Shutter button to confirm. 
10.  To exit the menu, press the  Mode 
button repeatedly until the  EXIT screen 
appears. 
11.  Press the  Shutter button to exit  SET mode.    

37 
4.8 OSD Up/Down 
This menu allows you to display the OLED screen upside down. 
Do the following to enable this feature. 
1.  Press the  Mode button repeatedly to change to  SET 
mode. 
2.  Press the  Shutter button to enter  SET mode. 
3.  Press the  Mode button to highlight  MORE. 
4.  Press the  Shutter button to enter the  MORE menu.   
5.  Press the  Shutter button to enter the  UP/DOWN 
submenu. 
        
6.  Press the  Mode button to select  OSD UP or OSD DOWN . 
 
7.  Press the  Shutter button...

 
38 
4.9 LED 
This menu allows you to turn the LED on or off.  
Do the following to turn the LED on or off. 1.  Press the  Mode button repeatedly to change to  SET 
mode. 
2.  Press the  Shutter button to enter  SET mode. 
3.  Press the  Mode button to highlight  MORE. 
4.  Press the  Shutter button to enter the  MORE menu.   
5.  Press the  Mode button to highlight  LED. 
6.  Press the  Shutter button to enter the  LED submenu. 
        
7.  Press the  Mode button to select  ON or OFF . 
 
8.  Press...