HP 5500 Ei 5500 Si Switch Series Installation Guide

 46 
Hot swappable power supply failure 
This section applies to the A5500-24G-SFP EI (2 slots) and A5500-24G-SFP EI TAA (2 slots) switches.  
You can look at the PWR1 or PWR2 LED (see  Table 17) on the fro
 nt panel of an A5500-24G-SFP EI (2 
slots) or A5500-24G-SFP EI TAA (2 slots) switch and the LEDs on the power supply to identify a power 
supply failure.  
If the power supply system is correctly working, th e power supply LEDs are steady green. If the LEDs 
behave in any other way (see  Table 17),...

 47 
Garbled terminal display 
If terminal display is garbled, verify that the following settings are configured for the terminal, for 
example, HyperTerminal: 
•   Baud rate—9,600  
•   Data bits—8  
•   Parity—none 
•   Stop bits—1 
•   Flow control—none 
•   Emulation—VT100  

 48 
Support and other resources 
Contacting HP 
For worldwide technical support information, see the HP support website: 
http://www.hp.com/support
 
Before contacting HP, collect the following information: 
•   Product model names and numbers 
•   Technical support registrati on number (if applicable) 
•   Product serial numbers 
•   Error messages 
•   Operating system type and revision level 
•   Detailed questions 
Subscription service 
HP recommends that you register your product at  the...

 49 
Conventions 
This section describes the conventions used in this documentation set. 
Command conventions 
Convention Description 
Boldface Bold text represents commands and keywords that you enter literally as shown. 
Italic Italic text represents arguments that you replace with actual values. 
[ ]  Square brackets enclose syntax choices  (keywords or arguments) that are optional. 
{ x | y | ... } Braces enclose a set of required syntax choi ces separated by vertical bars, from which 
you select...

 50 
Network topology icons 
 Represents a generic network device, such as a router, switch, or firewall. 
 Represents a routing-capable device, such as a router or Layer 3 switch. 
 Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that 
supports Layer 2 forwarding and other Layer 2 features. 
 
Port numbering in examples 
The port numbers in this document are for illustrati
on only and might be unavailable on your device. 
 
  

 51 
Appendix A Technical specifications 
Physical specifications 
Chassis dimensions and weights 
Chassis Dimensions Dimensions (H × W × D) Weight 
A5500-24G SI (2 slots)  43.6 × 440 × 300 mm  
(1.72 × 17.32 × 11.81 in) 
< 4.5 kg (9.92 lb) 
A5500-24G EI (2 slots) 
A5500-24G EI TAA (2 slots) 
A5500-48G EI (2 slots) 
A5500-48G EI TAA (2 slots) 
A5500-48G SI (2 slots) 43.6 × 440 × 300 mm  
(1.72 × 17.32 × 11.81 in) 
< 5 kg (11.02 lb) 
A5500-24G-SFP EI (2 slots) 
A5500-24G-SFP EI TAA (2 slots) 43.6 × 440 ×...

 52 
Chassis Console 
ports 10/100/1000Base-T 
auto-sensing Ethernet 
ports
SFP ports 
Interafce 
card slots 
A5500-48G EI (2 slots) 
A5500-48G EI TAA (2 slots) 
A5500-48G SI (2 slots)  1 48 
4  2 
A5500-48G-PoE+ EI (2 slots) 
A5500-48G-PoE+ EI TAA (2 
slots) 
A5500-48G-PoE+ SI (2 slots) 1  48, PoE+   4  2 
 
 
NOTE: 
•  On an A5500-24G-SFP EI (2 slots) or A5500-24G-SFP EI TAA (2 slots) switch, the last eight SFP 
ports and the eight 10/100/1000Base-T Ethernet ports are copper/fiber combo ports in pairs,...

 53 
Figure 38 Rear panel 
 
(1) AC power input   (2) RPS receptacle (shipped with a protective cover)  
(3) Grounding screw  (4) Interface card slot 1 (MOD1)  
(5) Interface card slot 2 (MOD2)   
 NOTE: 
The A5500-24G EI (2 slots), A5500-24G EI TAA (2 slots), and A5500-24G SI (2 slots) switches 
come with the expansion interface ca rd slots covered by filler panels. 
 
A5500-48G EI (2 slots)/A5500-48G EI TAA (2 slots)/A5500-
48G SI (2 slots) panel views 
Figure 39 Front panel 
 
(1) 10/100/1000Base-T...

 54 
Figure 40 Rear panel 
12345
 
(1) AC power input   (2) RPS receptacle (shipped with a protective cover)  
(3) Grounding screw  (4) Interface card slot 1 (MOD1) 
(5) Interface card slot 2 (MOD2)   
 NOTE: 
The A5500-48G EI (2 slots), A5500-48G EI TAA (2 slo ts), and A5500-48G SI (2 slots) switches come 
with the expansion interface card slots covered by filler panels.  
A5500-24G-SFP EI (2 slots)/A5500-24G-SFP EI TAA (2 slots) 
panel views 
Figure 41 Front panel 
 
(1) SFP port   (2) SFP port LED...

 55 
Figure 42 Rear panel 
 
(1) Grounding screw  (2) Power supply slot 1
(3) Power supply slot 2  (4) Interface card slot 1 (MOD1) 
(5) Interface card slot 2 (MOD2)    
 NOTE: 
•  The A5500-24G-SFP EI (2 slots) and A5500-24G-SFP EI TAA (2 slots) switches come with the 
expansion interface card slots covered by filler panels. 
•   The A5500-24G-SFP EI (2 slots) and A5500-24G-SFP EI TAA (2 slots) switches come with one power 
supply filler panel. If you use only one power supply, install the filler panel...