Honeywell Vx9 Manual

6 - 77
PEAP/MS-CHAP
1. Select WPA/WPA2 from Set Security Options.
2. Choose PEAP (EAP-MSCHAP V2) from the WPA/WPA2 EAP Type pulldown.
3. Click the Configure button.
4. Make sure User Name and Password is selected.
5. Enter the user credentials.
6. Click OK to save the credential information and then click OK again to save the profile.
7. Make sure the desired profile is selected on the Profile Management screen. Double-clicking on any profile 
makes that profile active. 

6 - 78
PEAP-GTC
1. Select 802.1x from Set Security Options.
2. Choose PEAP (EAP-GTC) from the WPA/WPA2 EAP Type pulldown.
3. Click the Configure button.
4. Enter the token User Name.
5. Click OK to save the credential information and then click OK again to save the profile.
6. Make sure the desired profile is selected on the Profile Management screen. Double-clicking on any profile 
makes that profile active. 

6 - 79
EAP-TLS
EAP-TLS requires that appropriate server and user certificates are installed on the Thor VX9 computer. Please refer to 
Certificates (page 6-64) for details.
1. Select WPA/WPA2 from Set Security Options.
2. Choose EAP-TLS from the WPA/WPA2 EAP Type pulldown.
3. Click the Configure button.
4. From the Trusted Root Certification Authorities pulldown, select the appropriate root certification authority.
5. From the Select a Certificate pulldown, select the appropriate user certificate.
6....

6 - 80
WPA LEAP
1. Select WPA/WPA2 from Set Security Options.
2. Choose LEAP from the WPA/WPA2 EAP Type pulldown.
3. Click the Configure button.
4. Make sure Use Saved User Name and Password is selected.
5. Enter the user credentials.
6. Click OK to save the credential information and then click OK again to save the profile.
7. Make sure the desired profile is selected on the Profile Management screen. Double-clicking on any profile 
makes that profile active. 

6 - 81
EAP-FAST
1. Select WPA/WPA2 from Set Security Options.
2. Choose EAP-FAST from the WPA/WPA2 EAP Type pulldown.
3. Click the Configure button.
4. Select MSCHAPv2 User Name and Password from the EAP-FAST Authentication Method pulldown list.
5. Check the checkbox for Allow Automatic PAC Provisioning. 

6 - 82
6. Click the Configure button.
7. Make sure Use Saved User Name and Password is selected.
8. Enter the user credentials.
9. Click OK to save the credential information, click OK again to save the authentication information and then click 
OK again to save the profile.
10. Make sure the desired profile is selected on the Profile Management screen. Double-clicking on any profile 
makes that profile active. 

6 - 83
Broadcom Wireless Utility
The 802.11b/g radio is configured with the Broadcom® Wireless Utility (BWU). The BWU can be accessed by:
 Selecting Start > All Programs > Broadcom Wireless > Broadcom Wireless Utility
 Clicking on the BWU icon (   ) in the system tray. 
Wireless Zero Config
This section assumes the BWU is used to configure the radio. However, it is possible to use the Windows Wireless Zero 
Config (WZC) utility to configure the radio.
To use WZC to configure the radio:
 Start the BWU and...

6 - 84
No Security
1. Enter the Network name (SSID).
2. Set Network authentication to Open.
3. Click OK to save the profile.
4. The BWU automatically connects to the first listed profile within range. Use the Up and Down icons to adjust the 
list as desired. 

6 - 85
WEP
1. Enter the Network name (SSID).
2. Set Network authentication to Open.
3. Enter and confirm the network key under Network Key.
4. Click OK to save the profile.
5. The BWU automatically connects to the first listed profile within range. Use the Up and Down icons to adjust the 
list as desired. 

6 - 86
LEAP
1. Enter the Network name (SSID).
2. Set Network authentication to 802.1X.
3. Select LEAP from the EAP method pulldown list.
4. Enter the user credentials and confirm the network password under User Name/Password.
5. Click OK to save the profile.
6. The BWU automatically connects to the first listed profile within range. Use the Up and Down icons to adjust the 
list as desired.