Honeywell Vx9 Manual

6 - 97
SIM Card Installation
Read through these installation instructions before commencing assembly.
This document describes the process of inserting a SIM card into the PCCard of your Thor VX9 computer.
Requirements
In order to perform this operation you need the following:
 Torx 20 screwdriver.
 SIM card from your network operator.
Installation
The following procedure describes how to insert a SIM card:
1. Place the Thor VX9 upside down onto a flat clean surface.
2. Remove the service hatch by...

6 - 98
5. Insert your SIM card into the PCCard as shown below.
6. Reinsert the PCCard into the PCCard socket.
7. Reattach the antenna pigtail.
8. Reattach the service hatch.
9. Start the computer. 

6 - 99
Option GlobeTrotter Connect
SIM Card PIN
If you have not already installed a SIM card, see SIM Card Installation (page 6-97).
If you have PIN-code enabled you will be prompted to type the code at startup.
Using Option GlobeTrotter Connect
1. Double-click the gray/green Option icon in the system tray to launch the application
2. For some operators the application is automatically configured for the network, if not configure the settings as advised 
by your local operator
3. When all settings are...

6 - 100
OneClick Internet
This section contains the User Manual for the customized version of WebToGos OneClick Internet for the Honeywell Thor VX9.
OneClick Internet is installed by Honeywell on all Thor VX9s equipped with a WWAN radio. Available carriers and OneClick fea-
tures may vary by device.
OneClick Internet provides:
 Internet connection management
 Email download
 Contact management for SIM and Microsoft Outlook
Since WebToGo OneClick Internet is preinstalled, it is present on the Windows...

6 - 101
Activation
This step is only necessary for Verizon.
The activation screen is displayed automatically after the Verizon firmware is selected. If the activation screen is not 
automatically displayed, double-tap the OneClick Internet icon on the desktop. Select Settings > General tab and tap 
the Activate button.
Make sure Automated Activation is selected and tap Next.
Ta p  Next to complete the activation.
Once the activation is completed, OneClick Internet may be minimized to the tray.
 To verify...

6 - 102
This screen contains the settings including the telephone number from the provider, in this case Verizon. 

6 - 103
Using OneClick Internet
If OneClick Internet is not loaded, double-tap the desktop icon to load it. If OneClick Internet is loaded but minimized to the 
system tray, tap the OneClick Internet icon in the system tray to maximize it.
Connection Management
1. Launch the OneClick Internet Connection Manager and wait until the status icon is Blue indicating ready.
2. If there is a problem, verify the SIM card is installed (AT&T, T-Mobile only), the proper firmware has been loaded, 
etc.
3. If Pin...

6 - 104
Update Button
  One Click Internet provides a built-in online update functionality that allows for an automatic update of OneClick 
Internet application, device drivers, and APN database.
Honeywell DOES NOT recommend using this option. Contact Technical Assistance (page 9-1) for information on 
upgrading to another version of OneClick Internet.
The update is triggered by pressing the update button. The application will check the WebToGo server, if updates are 
available, and offer them for...

6 - 105
Profile
Create a connection profile to store connection information. Once a profile has been created, its name appears in the drop 
down Profiles list, which replaces the Profile Name textbox in the illustration above.
Buttons
Parameters
Button Description
Create a new profile. When this option is selected, the Profile Name is a text box. Enter a name for 
the profile as well as other connection specific configuration. When finished, tap the Save button to 
save the new profile.
Edit a current...

6 - 106
Network
The appearance of the network tab depends on the type of firmware selected.
Network with SIM Card
Select Connection
Select and tap Apply. A “Network changed successfully” message is displayed.
Close the tab and view the signal strength icon in the main window. Once the signal strength is displayed, you can 
establish a connection.
Select Network
Use this option to select from available networks.
Note: When you are registered to a CDMA network, you cannot select the network. “All CDMA...