Home > Honeywell > Thermostat > Honeywell Rlv3120a1005h Manual

Honeywell Rlv3120a1005h Manual

Add to Favourites
    Download as PDF

    View the Honeywell Rlv3120a1005h Manual for free. All the Honeywell manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 Application This thermostat can be used to control an electric heating system such as a baseboard heater or a convector. The thermostat CANNOT be used with: • a resistive load under 0.83 A• a resistive load over 8.3 A• a system driven by a contactor or a relay (inductive load)• a fan-forced heating system (e.g. : fan-forced convector)• a central heating system. WARNING Electrical Shock Hazard. This thermostat is a line voltage control (120–240 Volts). Do not install it if you are not completely familiar...
    Page 2 2 ATTENTION: MERCURY RECYCLING NOTICE This product does not contain mercury. However, this product may replace a product that contains mercury. Mercury and products containing mercury should not be discarded in household trash. For more information on how and where to properly recycle a thermostat containing mercury in the United States, please refer to the Thermostat Recycling Corporation at www.thermostat-recycle.org. For mercury thermostat recycling in Canada, please refer to Switch the Stat at...
    Page 3 3 Removing the faceplate WARNING TURN OFF POWER TO THE HEATING SYSTEM AT THE MAIN POWER PANEL TO AVOID ELECTRIC SHOCK. Loosen the screw holding the faceplate to the base. The screw cannot be completely removed and remains captive on the base. Remove the faceplate from the base by pulling the bottom half. 4-wire Installation2-wire Installation Wiring Connect either one of the thermostat wires to the heater wire and the other one to the power supply wire using solderless connectors for copper wires....
    Page 4 4 Installing the faceplate Install the base onto an electrical box. Reinstall the faceplate on the base and secure it in place with the screw. Selecting the temperature display format To select the temperature display format: 1. Press the Up and Down buttons for three seconds. The format currently used will be indicated on the screen.2. Press the Up or Down button to change the format.3. Press the Up and Down buttons for one second (or wait for one minute) to return to the normal display. NOTE: Keep the...
    Start reading Honeywell Rlv3120a1005h Manual

    Related Manuals for Honeywell Rlv3120a1005h Manual

    All Honeywell manuals