Honeywell Netaxs 4 Manual

Upgrading NetAXS™ Firmware
NetAXS™ Release 3.1.8 Upgrade Procedure
NetAXS Access Control Unit User’s Guide, 800-04410, Revision A91
Note: For WIN-PAK systems, we recommend that you stop the “communications server 
service” while upgrading, and then restart the service after your panels are upgraded.
2. Connect to your gateway panel using the instructions from the NetAXS™ Access Control Unit 
User’s Guide, section 1-2, “Connecting to the NetAXS™ Web Server.” 
Note: You cannot have more than one gateway on...

92www.honeywell.com Upgrading NetAXS™ Firmware
NetAXS™ Release 3.1.8 Upgrade Procedure
8. Install the new application file, 3-NetAXSimage03.01.08.bin. To do this:
a. Select the Configuration > System > File Management tab.
b. In the Download box, click Browse to locate the file, 3-NetAXSimage03.01.08.bin.
c. Select the file and click Download. Click OK to continue. After the “Download 
complete” message appears, click OK again. The “Download image” message appears 
and tells you to wait five minutes...

Upgrading NetAXS™ Firmware
NetAXS™ Release 3.1.8 Upgrade Procedure
NetAXS Access Control Unit User’s Guide, 800-04410, Revision A93
i. Click OK.
j. Close the web browser and re-open it.
k. Enter the IP Address again into the URL box. The login screen appears without the 
certificate error
A.2.6  Clearing the Cache in the Internet Browsers Used by the NetAXS™ Web 
Server
The NetAXS™ panel supports Internet Explorer 7 (IE7), Internet Explorer 6 (IE6), Firefox 2, and 
Firefox 3. For all browsers, we...

94www.honeywell.com Upgrading NetAXS™ Firmware
NetAXS™ Release 3.1.8 Upgrade Procedure 

NetAXS™ Access Control Unit User’s Guide, Document 800-04410, Revision A                                      Index-1
Index
A
Access level 2-45
Access mode 2-33
Acknowledged alarms 4-77
Administrator 2-61
Alarms 4-75, 4-76
acknowledged 4-77
monitoring 4-76
Anti-passback 2-15, 2-34
Auto-relock 2-44, 2-54
Auxiliary outputs 2-55
B
Baud rate
host
 2-13
loop 2-13
C
Card and PIN duress detect 2-16
Card formats 2-34
for WIN-PAK configuration 3-68
Cardholder notes 2-16
Cards
access levels
 2-45
adding 2-47
card...

In d e x
Index-2www.honeywell.com
Downstream
baud rate
 2-13
force baud reset 2-13
inputs 2-52
outputs 2-55
Downstream devices 2-23
Duress detect 2-16
E
Egress 2-42
Energizing 2-26
Events 4-75, 4-79
F
File management 2-17
Firmware
downloading
 2-17
for WIN-PAK configuration 3-67
reverting to previous 2-17
First card rule 2-41
Force baud reset 2-13
G
Gateway panel 1-2, 2-15
Groups 2-57
H
Holidays (see also Time Zones) 2-29
Host 2-11
Host baud rate 2-13
Host connection 2-12
Host mode monitoring 2-11
I...

Index
NetAXS™ Access Control Unit User’s Guide, Document 800-04410, Revision A                                      Index-3
NX4IN/NX4OUT boards 2-55
NX4IN/NX4OUTboards 2-52
O
Operator 2-61
Output relay 2-38
Outputs 2-38, 4-75
auxiliary 2-55
de-energizing 4-86
downstream 2-23
energizing 4-86
groups 2-57
interlock 2-56
interlocks 2-59
latching 2-56
monitoring 4-85
pulsing 4-86
re-setting 4-86
P
Panel status 1-7
Panels
addresses
 2-15
configuring via WIN-PAK 3-66
downstream baud rate 2-13
gateway 2-15...

Index
Index-4www.honeywell.com
U
Unsupervised 2-43, 2-44
Uploading card and configuration data 2-17
Use limits 2-48
Users 2-61
W
Web mode monitoring and configuring 2-11
Web server 1-1
Web server connection 1-2
direct 1-3
hub 1-2
Web session timeout 2-15 

Honeywell Access Systems
135 W. Forest Hill Avenue
Oak Creek, WI 53154
United States
800-323-4576
414-766-1798 Fax
www.honeywellaccess.com Specifications subject to change
without notice.
© Honeywell. All rights reserved.
Document 800-04410, Revision A