Honeywell Netaxs 4 Manual

Configuring via the Web Server
Configuring the System
NetAXS™ Access Control Unit User’s Guide, Document 800-04410, Revision A 61 Steps to enable/disable an interlock
: 
1. To enable an interlock, click the 
Enable button.
2. To disable an interlock, click the 
Disable button.
2.9  Configuring Users
A user is one who will be using the NetAXS™ software interface in one or more of the following 
functional roles:
• Operator – Monitors the system’s operation. The Operator user can perform the following...

62www.honeywell.com Configuring via the Web Server
Configuring the System
.Click Users to display the User Configuration screen:
Figure 2-24:   Configuration > Users
The User Configuration screen enables you to: 
• Create a user.
• Modify a user.
• Delete a user.
• Enable and disable a user account.
• View the user’s current login status, either logged in or logged out.
Steps to create a user: 
1. Click the 
New User button.
2. Enter the user’s name in the 
Name field (at least five characters).
3. Enter...

Configuring via the Web Server
Configuring the System
NetAXS™ Access Control Unit User’s Guide, Document 800-04410, Revision A 63
5. Select the Account Status:
– Enabled – Activates the user account (the user can log in).
– Disabled – De-activates the user account (the user cannot log in).
6. Select the user’s Language Preference from the dropdown list.
7. Click the 
Add User button.
Steps to modify a user: 
1. In the 
User Name field, click the name of the user you want to modify.
2. Change the name,...

64www.honeywell.com Configuring via the Web Server
Configuring the System 

NetAXS™ Access Control Unit User’s Guide, Document 800-04410, Revision A65
3
Configuring via WIN-PAK
In this chapter...
3.1  Overview
This chapter explains the NetAXS™ configuration functions as accessed via the 
Quick Start Wizard (QSW) in WIN-PAK 2005, WIN-PAK PRO 2005, WIN-PAK SE, 
and WIN-PAK PE. The QSW creates the ADV options and adds the panel to the 
Control Map and the Master Access Level.
These functions should be performed only by the NetAXS™ system administrator or 
service personnel.
Notes:...

66www.honeywell.com Configuring via WIN-PAK
Adding a New NetAXS™ Panel
The NetAXS™ Gateway panel’s baud rate is set configured via the NetAXS™ web server (see 
the NetAXS™ Access Control Unit Installation Guide for instructions). When you set the Loop 
Type in the QSW to 485 ACK-NAK, you define the baud rate to be 19.2 kilobits per second. 
This baud rate and the panel’s baud rate must match to communicate properly. For WIN-PAK 
SE or WIN-PAK PE systems, you can adjust the baud rate of the N-485 device...

Configuring via WIN-PAK
Adding a New NetAXS™ Panel
NetAXS™ Access Control Unit User’s Guide, Document 800-04410, Revision A67
3.2.2  Configuring the Panel Manually
Use the WIN-PAK Panel Configuration screen to complete the NetAXS™ panel configuration 
manually. All of the configuration screen options are supported for NetAXS™ panel configuration, 
except where they are noted otherwise in this section.
Note:  You cannot initialize the NetAXS™ panel from the WIN-PAK Control Map until you complete 
the...

68www.honeywell.com Configuring via WIN-PAK
Adding a New NetAXS™ Panel
3. Add the ADV.
4. Click 
OK.
5. Display and complete the Card Format tab:
Figure 3-3:   WIN-PAK Panel Configuration Screen - Card Format Tab 

Configuring via WIN-PAK
Adding a New NetAXS™ Panel
NetAXS™ Access Control Unit User’s Guide, Document 800-04410, Revision A69
6. Display and complete the Time Zones tab:
Figure 3-4:   WIN-PAK Panel Configuration Screen - Time Zones Tab
Note: All Time Zones and Holidays are supported for a NetAXS™ panel. 

70www.honeywell.com Configuring via WIN-PAK
Adding a New NetAXS™ Panel
7. Display and complete the Options tab:
Figure 3-5:   WIN-PAK Panel Configuration Screen - Options Tab
Notes:
• All options are supported for a NetAXS™ panel except the Advanced U option. When using 
Groups, you must select both AEP boards in the Hardware Options box. The NX4OUT board 
functions as two AEP-3 boards, and it provides outputs 17-32.
• You can select Keypads; however, the NetAXS™ panel does not support the matrixed...