Honeywell Magicstat 1 Manual

							RTH6350/RTH6450 Series
 9 69-2415ES—03
Save money by setting program schedules
It’s easy to program your system for maximum energy savings. You can program four 
time periods each day, with different settings for weekdays, Saturday and Sunday.
Set to the time you awaken and the temperature you want 
during the morning, until you leave for the day.
Set to the time you leave home and the temperature you 
want while you are away (usually an energy-saving level).
Set to the time you return home and the temperature you 
want during the evening, until bedtime.
Set to the time you go to bed and the temperature you want 
overnight (usually an energy-saving level).
WAKE6:00 am
70 °
LEAVE8:00 am
62 °
RETURN6:00 pm
70 °
SLEEP10:00 pm
62 ° 
						

							Operating Manual
69-2415ES—03 10
Energy-saving settings for maximum cost savings
This thermostat is pre-set with energy-saving program settings. We recommend these 
settings, since they can reduce your heating/cooling expenses by as much as 33%. 
(See next page to adjust times and temperatures of each time period.)
Wake(6:00 am)
Leave(8:00 am)
Return(6:00 pm)
Sleep(10:00 pm)
Cool (Mon-Fri)Heat (Mon-Fri)Heat (Sat-Sun)Cool (Sat-Sun)
70 °75 °70 °75 °
62 °83 °62 °
[Or	cancel	 period]83 ° 
[Or	cancel	 period]
70 °75 °70 °
[Or	cancel	 period]75 °
[Or	cancel	 period]
62 °78 °62 °78 ° 
						

							RTH6350/RTH6450 Series
 11 69-2415ES—03
To adjust program schedules ( RTH6350 only)
1. Press SET CLOCK/DAY/SCHEDULE\X, then SET SCHEDULE.
2. Press s or t to set your weekday Wake time (Mon–Fri), then press NEXT.
3. Press s or t to set the temperature for this time period, then press NEXT.
4. Set time and temperature for the next time period (Leave). Repeat steps 2 and 3 for each weekday time period.
5. Press NEXT to set weekend time periods (Sat-Sun), then press DONE to save & exit.
Note: Make sure the thermostat is set to the system you want to program (Heat or Cool).
Note: You can press CANCEL \fERIOD to eliminate unwanted time periods (except Wake).M28409
Set  Clock/Day /
Schedul eAuto
Fan
System
Heat
Set  Day Set Schedul e
Done
Mon 
Tue  We d Thu Fri
Leav e
Set Schedule
Heat
Setting
AM
628 :
00
DoneCancelPeriodNext 
						

							Operating Manual
69-2415ES—03 12
About your new thermostatTo adjust program schedules ( RTH6450 only)
1. Press SET CLOCK/DAY/SCHEDULE\X, then SET SCHEDULE.
2. Press s or t to set your weekday Wake time (Mon–Fri), then press NEXT.
3. Press s or t to set the temperature for this time period, then press NEXT.
4. Set time and temperature for the next time period (Leave). Repeat steps 2 and 3 for each weekday time period.
5. Press NEXT to set Saturday time periods.
6. Press NEXT to set Sunday time periods, then press DONE to save & exit.
Note: Make sure the thermostat is set to the system you want to program (Heat or Cool).
Note: You can press CANCEL \fERIOD to eliminate unwanted time periods (except Wake).M28409
Set  Clock/Day /
Schedul eAuto
Fan
System
Heat
Set  Day Set Schedul e
Done
Mon 
Tue  We d Thu Fri
Leav e
Set Schedule
Heat
Setting
AM
628 :
00
DoneCancelPeriodNext 
						

							RTH6350/RTH6450 Series
 13 69-2415ES—03
About your new thermostat
M28410
Heat
Setting
Inside
AM
69756:
30
Te mporary
Run Schedule
Auto
Fan
System
Heat
Program schedule override (temporary)
Press s or t to immediately adjust 
the temperature. This will temporarily 
override the temperature setting for the 
current time period.
The new temperature will be 
maintained only until the next 
programmed time period begins (see 
page 10). For example, if you want to 
turn up the heat early in the morning, it 
will automatically be lowered when you 
leave for the day.
To cancel the temporary setting at any 
time, press RUN SCHEDULE.
Press to cancel temporary setting and resume program schedule.
Note: Make sure the thermostat is set to the system you want to control (heat or cool).
Press to temporarily adjust temperature. 
						

							Operating Manual
69-2415ES—03 14
About your new thermostat
M28411
Heat
Setting
Inside
AM
69756:
30
Run Schedule
Auto
Fan
System
Heat
Hold
Program schedule override (permanent)
Press HOLD to permanently adjust 
the temperature. This will override 
the temperature settings for all time 
periods.
The	 “Hold”	 feature	 turns	off	the	
program schedule and allows you 
to adjust the thermostat manually, 
as needed.
Whatever temperature you set will 
be maintained 24 hours a day until 
you manually change it, or press 
RUN SCHEDULE	to	 cancel	 “Hold”	 and	
resume the programmed schedule.
Press	to	cancel	 “Hold”	 setting	and resume program schedule.
Note: Make sure the thermostat is set to the system you want to control (heat or cool).
Press to permanently adjust temperature. 
						

							RTH6350/RTH6450 Series
 15 69-2415ES—03
About your new thermostat
Use this feature in climates where both air conditioning and heating are used on the 
same day. When the system mode is in Auto, the thermostat automatically selects \
heating or cooling depending on the indoor temperature.
While in the Auto mode, if a schedule override takes place (temporarily\
 or perma-
nently) the thermostat will automatically adjust the cooling and heatin\
g settings to 
maintain a 3-degree separation between the cool and heat settings.
For example, if the heat temperature is raised to where it gets within 3-dgrees of the 
cool	setting,	 the	display	 will	show	 an	up	 arrow	 next	to	“cool”	 to	show	 the	thermostat	
is raising the cool setting up to maintain a 3-dgreee separation.
Press the Select Heat/Cool button to select between the heat and cool to v\
iew/adjust 
either mode.
Auto Changeover (RTH6450 only) 
						

							Operating Manual
69-2415ES—03 16
About your new thermostat
If the cool temperature is lowered to where it gets close to the heat setting, an arrow 
next to heat will show the thermostat is lowering the heat setting down \
to maintain a 
3-degree separation.
Auto Changeover (RTH6450 only)
CAUTION: To avoid possible compressor damage, do not use Auto 
Changeover if the outside temperature drops below 50ºF (10ºC).
Run Schedule
Auto Cool
Fan Select
Heat/Coo l
Heat
Setting
Inside
PM
73731:
05
Te mporary
M27477
Press Select Heat/Cool to set the heat or cool temperature.
The triangle indicates the cool temperature is increasing to maintain 3 degrees between heat and cool settings. 
						

							RTH6350/RTH6450 Series
 17 69-2415ES—03
About your new thermostat
M28412
 
Cool On Coo
l
Setting
Inside
AM75756:
30
Set  Clock/Day/
Schedule Auto
Fan
System
Cool
Built-in compressor protection
This feature helps prevent damage to the 
compressor in your air conditioning or heat 
pump system.
Damage can occur if the compressor is 
re-started too soon after shutdown. This 
feature forces the compressor to wait a few 
minutes before restarting.
During the wait time, the display will flash 
the message Cool	On (or Heat	 On if you have 
a heat pump). When the safe wait time has 
elapsed, the message stops flashing and the 
compressor turns on.
Message flashes until safe restart time has elapsed. 
						

							Operating Manual
69-2415ES—03 18
About your new thermostat
Smart Response® Technology: This feature 
allows	the	thermostat	 to	“learn”	 how	long	
the furnace and air conditioner take to reach 
programmed temperature settings, so the 
temperature is reached at the time you set. 
For example: Set the Wake time to 6 am, and 
the temperature to 70°. The heat will come 
on before 6 am, so the temperature is 70° 
by	the	 time	 you	wake	 at	6.	The	 message	 “In	
Recovery”	 is	displayed	 when	the	system	 is	
activated before a scheduled time period.
Smart Response® Technology
M27476
 
Cool On Coo
l
Setting
Inside
AM75756:
38
Set  Clock/Day/
Schedule Auto
Fan
System
Cool
In Recovery
Displays when Smart Response is active.