Honeywell Hrhd 9 User Manual

							Figures
Document 900.0856
 Rev B11
02/08
Figure 3-59 Motion Detection Settings Screen  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  78
Figure 3-60 Motion Detection Sensitivity Screen  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  79
Figure 3-61 Motion Detection Min. Blocks Screen  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  79
Figure 3-62 Motion Detection Zone Screen .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  79
Figure 3-63 Motion Detection Zone Menu   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  80
Figure 3-64 Daytime Setup Screen  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 80
Figure 3-65 Motion Detection Actions 1 Screen   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  81
Figure 3-66 Motion Detection Actions 2 Screen   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  82
Figure 3-67 Video Loss Settings Screen   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  83
Figure 3-68 Video Loss Actions 1 Screen .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  83
Figure 3-69 Video Loss Actions 2 Screen .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  84
Figure 3-70 Text-In Settings Screen .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 85
Figure 3-71 Text-In Device (VP Filter) Settings Screen  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  86
Figure 3-72 Text-In Device (Generic Text and EPSON-POS) Settings Screen .  .  .  .  .  .  .  .  .  .  86
Figure 3-73 Text-In Actions 1 Screen  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 88
Figure 3-74 Text-In Actions 2 Screen  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 89
Figure 3-75 Health Check Screen .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 90
Figure 3-76 Check Recording Screen .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  90
Figure 3-77 Storage Screen .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  91
Figure 3-78 S.M.A.R.T. Setup Screen .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  91
Figure 3-79 System Event Actions Screen  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  92
Figure 3-80 Event Status Screen  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  93
Figure 4-1 PTZ Select Camera Menu   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  98
Figure 4-2 PTZ Set Preset Screen  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 98
Figure 4-3 PTZ Preset View Screen  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  99
Figure 4-4 PTZ Menu .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  99
Figure 4-5 PTZ Controls  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  99
Figure 4-6 Spot Monitor Menu .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   102
Figure 4-7 Sequence Menu   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  102
Figure 4-8 Mouse Menu  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   103
Figure 4-9 Mouse Display Menu .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   104
Figure 4-10 Mouse Playback Controls   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   108
Figure 4-11 Search Menu  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   109
Figure 4-12 Go to the Date/Time Screen  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   109
Figure 4-13 Calendar Search Screen  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   110
Figure 4-14 Event Log Search Screen   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   111
Figure 4-15 Event Log Search Option Screen   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   112
Figure 4-16 Text-In Search Screen  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  113
Figure 4-17 Text-In Search Option Screen  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   114
Figure 4-18 Motion Search Screen  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   115
Figure 4-19 Motion Search Option Screen  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   116
Figure 4-20 Clip-Copy Screen .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   117
Figure 4-21 Print Screen.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   120 
						

							Figures
12
Figure B-1 Text-In Search Option Example 1  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 124
Figure B-2 Text-In Search Option Example 2  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 125
Figure C-1 Clip Player Screen .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .127
Figure D-1 WebGuard Login Screen   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 132
Figure D-2 WebGuard Screen .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 133
Figure D-3 WebSearch Screen   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 135 
						

							Document 900.0856 Rev B13
02/08
About This Document
This document introduces the HRXD Series Digital Video Recorder (DVR) and 
describes how to install, configure, and operate the DVR.
This guide covers the 9- and 16-channel HRXD Series DVRs. The DVRs are identical 
except for the number of cameras and alarms that can be connected and the number 
of cameras that can be displayed. For simplicity, the illustrations and descriptions in this 
guide refer to the 16-camera model.
Overview of Contents
This document contains the following chapters and appendixes:
Chapter 1, Introduction, introduces the HRXD Series DVR, lists the features and 
gives a functional overview of its components. 
Chapter 2, Installation, describes how to install the DVR and connect the system 
components.
Chapter 3, Configuration, provides an overview of the front panel controls and 
LCD displays and provides instructions for configuring the DVR.
Chapter 4, Operation, covers live monitoring, recording video and audio, playing 
recorded video, and searching for video.
Appendix A, USB Hard Disk Drive Preparation, shows how to prepare the USB 
hard disk drive for computers using Microsoft
® Windows® 2000/98 operating 
systems.
Appendix B, Text In Search Examples, provides typical examples of text searches.
Appendix C, Reviewing Video Clips, describes the Clip Player program and its 
features.
Appendix D, WebGuard, demonstrates using WebGuard to access a remote DVR, 
monitor live video and search for recorded video using Internet Explorer.
Appendix E, Time Overlap, instructs how to search for recorded video when you 
have overlapping time segments.
Appendix F, Troubleshooting, provides answers for common technical issues.
Appendix G, Connector Pin Outs, describes I/O and RS485 connector pinouts. 
						

							14
Appendix H, Map of Screens, provides a graphical illustration of the menu 
screens.
Appendix I, System Log Notices, lists all of the System Log notices.
Appendix J, Error Code Notices, lists the system upgrade and clip copy Error 
Code notices.
Appendix K, Specifications, lists the DVR specifications.
Important Safeguards
1. Read Instructions
All the safety and operating instructions should be read before the appliance is 
operated.
2. Retain Instructions
The safety and operating instructions should be retained for future reference.
3. Cleaning
Unplug this equipment from the wall outlet before cleaning it. Do not use liquid 
aerosol cleaners. Use a damp soft cloth for cleaning.
4. Attachments
Never add any attachments and/or equipment without the approval of the 
manufacturer as such additions may result in the risk of fire, electric shock, or 
other personal injury.
5. Water and/or Moisture
Do not use this equipment near water or in contact with water.
6. Accessories
Do not place this equipment on an unstable cart, stand, or table. The equipment 
may fall, causing serious injury to a child or adult, and serious damage to the 
equipment. Wall or shelf mounting should follow the manufacturer’s instructions, 
and should use a mounting kit approved by the manufacturer.
This equipment and cart combination should be moved with care. Quick stops, 
excessive force, and uneven surfaces may cause the equipment and cart 
combination to overturn.
7. Power Sources
This equipment should be operated only from the type of power source indicated 
on the marking label. If you are not sure of the type of power, please consult your 
equipment dealer or local power company. 
						

							Document 900.0856 Rev B15
02/08
8. Power Cords
Operator or installer must remove power, BNC, alarm, and other connections 
before moving the equipment.
9. Lightning
For added protection for this equipment during a lightning storm, or when it is left 
unattended and unused for long periods of time, unplug it from the wall outlet and 
disconnect the antenna or cable system. This will prevent damage to the 
equipment due to lightning and power-line surges.
10. Overloading
Do not overload wall outlets and extension cords to avoid the risk of fire or electric 
shock.
11. Objects and Liquids
Never push objects of any kind through openings of this equipment as they may 
touch dangerous voltage points or short out parts that could result in a fire or 
electric shock. Never spill liquid of any kind on the equipment.
12. Servicing
Do not attempt to service this equipment yourself. Refer all servicing to qualified 
service personnel.
13. Damage Requiring Service
Unplug this equipment from the wall outlet and refer servicing to qualified service 
personnel under the following conditions:
 When the power-supply cord or the plug has been damaged
 If liquid is spilled or objects have fallen into the equipment
 If the equipment has been exposed to rain or water
 If the equipment does not operate normally by following the operating 
instructions, adjust only those controls that are covered by the operating 
instructions as an improper adjustment of other controls may result in 
damage and will often require extensive work by a qualified technician to 
restore the equipment to its normal operation.
 If the equipment has been dropped or the cabinet damaged
 When the equipment exhibits a distinct change in performance—this 
indicates a need for service.
14. Replacement Parts
When replacement parts are required, be sure the service technician has used 
replacement parts specified by the manufacturer or that have the same 
characteristics as the original part. Unauthorized substitutions may result in fire, 
electric shock, or other hazards.
15. Safety Check
Upon completion of any service or repairs to this equipment, ask the service 
technician to perform safety checks to determine that the equipment is in proper 
operating condition.
16. Field Installation
This installation should be made by a qualified service person and should 
conform to all local codes. 
						

							16
17. Correct Batteries 
WARNING!Risk of explosion if battery is replaced by an incorrect 
type. Dispose of used batteries according to the 
instructions.
18. Operating Temperature
An operating temperature range is specified (see Appendix K, Specifications) so 
that the customer and installer may determine a suitable operating environment 
for the equipment.
19. Elevated Operating Ambient Temperature
If installed in a closed or multi-unit rack assembly, the operating ambient 
temperature of the rack environment may be greater than room ambient. 
Therefore, consideration should be given to installing the equipment in an 
environment compatible with the specified operating temperature range.
20. Reduced Air Flow
Installation of the equipment in the rack should be such that the amount of airflow 
required for safe operation of the equipment is not compromised.
21. Mechanical Loading
Mounting of the equipment in the rack should be such that a hazardous condition 
is not caused by uneven mechanical loading.
22. Circuit Overloading
Consideration should be given to connection of the equipment to supply circuit 
and the effect that overloading of circuits might have on over-current protection 
and supply wiring. Appropriate consideration of equipment nameplate ratings 
should be used when addressing this concern.
23. Reliable Earthing (Grounding)
Reliable grounding of rack mounted equipment should be maintained. Particular 
attention should be given to supply connections other than direct connections to 
the branch circuit (for example, use of power strips). 
						

							Introduction
Document 900.0856
 Rev B17
02/08
1
Introduction
Features
Your color digital video recorder (DVR) provides recording capabilities for nine or 16 
camera inputs. It provides exceptional picture quality in both live and playback modes, 
and offers the following features:
 9 or 16 composite video input connectors 
 Compatible with color (NTSC or PAL) and B&W (CCIR and EIA-170) video sources
 Auto detection for NTSC and PAL
 Multiple monitor connectors: 1 BNC Video Out, 1 SVHS, 4 Spot, 1 VGA
 Multiple search engines (Date/Time, Calendar, Event)
 Records up to 240/200 images per second (NTSC/PAL)
 “Loop-Through” video connectors
 Continuous recording in Disk Overwrite mode
 Video archiving via Ultra SCSI interface
 3 USB 2.0 ports
 Continues recording while archiving and transmitting to remote sites during 
playback
 User-friendly Graphical User Interface (GUI) menu system 
 Multiple recording modes (Time-lapse, Pre-event, Alarm, Motion and Panic)
 4-Channel audio recording and 1-channel audio playback
 Text input for ATM and POS
 Alarm connections include: Input, Output and Reset Input
 Built-in alarm buzzer
 Live or recorded video access via Ethernet or modem
 Time synchronization using industry standard protocol
 Built-in CD-RW or DVD-RW drive
 Self-diagnostics with automatic notification including hard disk drive S.M.A.R.T. 
protocol
 Infrared remote control 
						

							Introduction
18
Technical Overview
In addition to replacing both a time-lapse VCR and a multiplexer in a security 
installation, your DVR has many features that make it much more powerful and easier 
to use than even the most advanced VCR.
The DVR converts analog NTSC or PAL video to digital images and records them on a 
hard disk drive. Using a hard disk drive allows you to access recorded video almost 
instantaneously; there is no need to rewind tape. The technology also allows you to 
view recorded video while the DVR continues recording video.
Digitally recorded video has several advantages over analog video recorded on tape. 
There is no need to adjust tracking. You can freeze frames, fast forward, fast reverse, 
slow forward and slow reverse without image streaking or tearing. Digital video can be 
indexed by time or events, and you can instantly view video after selecting the time or 
event.
Your DVR can be set up for event or time-lapse recording. You can define times to 
record, and the schedule can change for different days of the week and user-defined 
holidays.
The DVR can be set up to alert you when the hard disk drive is full, or it can be set to 
record over the oldest video once the disk is full.
Your DVR uses a proprietary encryption scheme making it nearly impossible to alter 
video.
You can view video and control your DVR remotely by connecting via modem or 
Ethernet. There is a SCSI port that can be used to record or archive video to external 
hard disk drives, and there are also three USB ports that can be used to upgrade the 
system or copy video clips to external hard disk, CD-RW and flash drives.
NoteThis manual covers the 9- and 16-channel digital video 
recorders. The DVRs are identical except for the number of 
cameras and alarms that can be connected and the number of 
cameras that can be displayed. For simplicity, the illustrations 
and descriptions in this manual refer to the 16-camera model. 
						

							Introduction
Document 900.0856
 Rev B19
02/08
Figure 1-1 Typical DVR Installation
Audio Input x4
Audio Output
LAN or MODEM 
Network ConnectionInternal CD-RW 
or DVD-RW 9 or 16 Cameras
Digital Video 
Recorder Computer 
Screen (VGA)
Video OutSpot Monitor x4
USB Device x 3Sensor 9 or 16 
Alarm Input
External SCSI 
Hard Disk Drive Alarm
Output 
9 or 16Siren
Flashing 
Light 
						

							Introduction
20