Honeywell Hrhd 9 User Manual
Have a look at the manual Honeywell Hrhd 9 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 178 Honeywell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Troubleshooting Document 900.0856 Rev B141 02/08 F Troubleshooting Table F-1 Troubleshooting Problem Possible Solution No Power Check power cord connections. Confirm that there is power at the outlet. No Live Video Check camera video cable and connections. Check monitor video cable and connections. Confirm that the camera has power. Check camera lens settings. Live Video very bright If a cable is attached to the Loop connector, make certain it is connected to a properly terminated device. DVR has stopped recording If the hard disk drive is full, you will either need to delete video or set the DVR to Recycle Mode. The icon displays, however, the DVR is not recordingWhen the DVR is in the Pre-Event recording mode, the yellow and display when there is no event, and the DVR is not recording. The red and display when any event occurs and the DVR starts recording.
Connector Pin Outs Document 900.0856 Rev B143 02/08 G Connector Pin Outs I/O Connector Pin Outs AI (1 to 16) Alarm Inputs 1 to 16 GND Chassis Ground (9 connectors) AO (1 to 16) Alarm Outputs 1 to 16 ARI Alarm Reset In
Connector Pin Outs 144 RS485 Connector Pin Outs Master Unit Slave Unit + ! To ! TX+ – ! To ! TX– + ! To ! RX+ – ! To ! RX–
Map of Screens Document 900.0856 Rev B145 02/08 H Map of Screens
System Log Notices Document 900.0856 Rev B147 02/08 I System Log Notices Boot Up Schedule On Shutdown Schedule Off Restart Panic On Upgrade Panic Off Upgrade Fail Clear All Data Power Failure Clear Disk Time Change Format Disk Time Zone Change Disk Full Time Sync Auto Deletion Time Sync Fail Search Begin Disk Bad Search End Login Clip-Copy Begin Logout Clip-Copy End Setup Begin Clip-Copy Cancel Setup End Clip-Copy Fail Remote Setup Change Callback Fail Remote Setup Fail Print Begin Setup Imported Print End Setup Import Failure Print Cancel Setup Exported Archive On Setup Export Failure Archive Off Setup Export Cancel
Error Code Notices Document 900.0856 Rev B149 02/08 J Error Code Notices System Upgrade Related Number Description 0 Unknown error 1 File version error 2 Operating system version error 3 Software version error 4 Kernel version error 100 Upgrade device mounting failed 101 Package is not found 102 Extracting package failed 103 LILO failed 104 Rebooting failed 105 Invalid package 106 ODD firmware upgrade failed 300 Remote connection failed 301 Remote network error 302 Remote upgrade is not authorized 303 Saving remote package failed 304 Remote upgrade is cancelled by the user 400 USB device mounting failed 401 Reading upgrade package on the USB device failed 402 Copying upgrade package on the USB device failed 500 System is busy clip copying
Error Code Notices 150 Clip Copy Related Number Description 0 Unknown error 1 Device error 2 Mounting failed 3 No media 4 Invalid media 5 File already existed 6 Not enough space 7 Creating temporary file failed 8 Opening disk failed 9 Formatting disk failed 10 Database has been changed 11 Appending failed 12 Bad sector 13 No executable file 14 Opening executable file failed 15 Writing executable file failed 16 Creating image failed 17 Burning failed 18 Burning is out of time 22 Verify failed